ISPS Related Publications

Dr. George G. Adams
A. Phylactopoulos and G.G. Adams, " Transverse Vibration of a Rectangularly Orthotropic Spinning Disk - Part I: Formulation and Free Vibration," ASME Journal of Vibration and Acoustics, Vol. 121, No. 3, 1999, pp. 273-279.

A. Phylactopoulos and G.G. Adams, " Transverse Vibration of a Rectangularly Orthotropic Spinning Disk - Part II: Forced Vibration and Critical Speeds," ASME Journal of Vibration and Acoustics, Vol. 121, No. 3, 1999, pp. 280-285.

G.G. Adams, " Imperfectly Constrained Planar Impacts -- A Coefficient-of-Restitution Model," International Journal of Impact Engineering, Vol. 19, No. 8, 1997, pp. 693-701.

R.Y. Wu and G.G. Adams, " The Effect of Disk Warpage/Skew on the Deflection and Vibration of a Flexible Disk Spinning Above a Baseplate and in Contact With a Point-Head," ASME Journal of Tribology, Vol. 119, No. 1, 1997, pp. 64-70.

G.G. Adams, " Critical Speeds and the Response of a Tensioned Beam on an Elastic Foundation to Repetitive Moving Loads," International Journal of Mechanical Sciences, Vol. 37, No. 7, 1995, pp. 773-781.

A. Phylactopoulos and G.G. Adams, "The Response of a Nonuniformly Tensioned Circular String to a Moving Load," Journal of Sound and Vibration, Vol. 182, No. 3, 1995, pp. 415-426.

R.Y. Wu and G.G. Adams, "The Effects of Baseplate Warping and Skew on the Configuration of a Spinning Flexible Disk," ASME Journal of Tribology, Vol. 116, No. 3, 1994, pp. 514-520.

G.G. Adams, " Impact Dynamics and the Coefficient of Restitution for the Eccentric Collision of a Slider onto a Disk," Advances in Information Storage Systems (ASME Press), Vol. 5, 1993, pp. 297-310.

G.G. Adams and D.N. Tran, "The Coefficient of Restitution for a Planar Two-Body Eccentric Impact," ASME Journal of Applied Mechanics, Vol. 60, No. 4, 1993, pp. 1058-1060.

G.G. Adams, "The Point-Load Solution and Simulation of a Flexible Spinning Disk Using Various Disk-to-Baseplate Air-Flow Models, " Tribology Transactions, Vol. 36, No. 3, 1993, pp. 470-476.

J.F. Maher and G.G. Adams, "The Point-Load Solution, Using Linearized von Karman Plate Theory, for a Spinning Flexible Disk Near a Baseplate," Tribology Transactions, Vol. 35, No. 3, 1992, pp. 473-481.

J.F. Maher and G.G. Adams, "Effect of Displacement-Dependent Membrane Stresses on the Axisymmetric Configuration of a Spinning Flexible Disk," Tribology Transactions, Vol. 34, No. 4, 1991, pp. 597-603.

G.G. Adams, "A Novel Approach to the Foil Bearing Problem Interface," Tribology and Mechanics of Magnetic Storage Systems, Vol. 6, STLE SP-26, 1989, pp. 1-7.

G.G. Adams and J.P. Averell, "Simulation of the Floppy-Disk/Head Interface," Tribology and Mechanics of Magnetic Storage Systems, Vol. 5, STLE SP-25, 1988, pp. 135-141.

G.G. Adams, "Critical Speeds for a Flexible Spinning Disk," International Journal of Mechanical Sciences, Vol. 29, No. 8, 1987, pp. 525-531.

H. Manor and G.G. Adams, "An Elastic Beam Moving with Constant Speed Across a Drop-Out," International Journal of Mechanical Sciences, Vol. 25, No. 2, 1983, pp. 137-148.

G.G. Adams, "Procedures for the Study of the Flexible-Disk to Head Interface," IBM Journal of Research and Development, Vol. 24, No. 4, 1980, pp. 512-517.

G.G. Adams, "Analysis of the Flexible Disk Head/Interface," ASME Journal of Lubrication Technology, Vol. 102, No. 1, 1980, pp. 86-90.