Bernal, D. (2002). "Load vectors for damage localization", Journal of Engineering Mechanics, ASCE,
          Vol.128, No.1, pp.7-14.
 
          Bernal, D. (2002). "Phase II of the ASCE benchmark study - performance of the DLV approach", 1st European
          Workshop on Structurural Health Monitoring, Paris, pp.161-168.

          Bernal, D. (2002). "A flexibilty based damage characterization for phase II of the IASC-ASCE benchmark
          study",15th  Engineering Mechanics Conference, Columbia University, NY.

          Bernal, D., Dyke, S., Lam, P. and Beck, J. (2002). "Phase II of the IASC-ASCE benchmark study on SHM"
          15th  Engineering Mechanics Conference, Columbia University, NY.

          Bernal, D. and Gunes, B. (2002). "A flexibility based approach for the localization and quantification
          of damage: A benchmark application," to appear in the Journal of Engineering Mechanics.

          Bernal, D. and Gunes, B. (2002) " Damage localization in output-only systems: A flexibility based approach",
          IMAC-XX, pp.1185-1191.

          Bernal, D. (2001) "A subspace approach for the localization of damage in stochastic systems", 3rd International
          Workshop in Structural Health Monitoring, Stanford, CA, pp.899-908.

          Bernal, D. and Gunes, B. (2001) "A flexibility based approach for the ocalization and quantification
          of damage: Application in a benchmark structure", 3rd International Workshop in Structural Health Monitoring,
          Stanford, CA, pp.680-689.

          Dyke, S.J., Bernal, D., Beck, J.L. and Ventura C., (2001) "An experimental benchmark problem in structural
          health monitoring",3rd International Workshop in Structural Health Monitoring, Stanford, CA,pp.488-497.

          Beck, J. and Bernal, D. (2001)  " A Benchmark Problem for Structural Health Monitoring", Experimental
          Techniques, vol.25, no.3, pp.49-53..

          Bernal, D and Levy, A. (2001) "Damage localization in plates using DLVs", International Modal Analysis
          Conference (IMAC-XIX), Orlando, pp-1205-1211.

          Bernal D. (2000). " Extracting flexibility matrices from state-space realizations", COST F3, Madrid, Spain pp.127-135

          Bernal D. (2000). " Damage localization using load vectors", COST F3, Madrid, Spain pp.223-231.

          Bernal, D. and Gunes, B. (2000). "Extraction of system matrices from state-space realizations", 14th
          Engineering Mechanics Conference, Austin, TX.

Bernal, D. and Gunes, B. (2000). "An examination of instantaneous frequency as a damage detection tool", 14th Engineering Mechanics Conference, Austin, TX.

Bernal, D. and Gunes, B. (2000). "Observer/Kalman and subspace identification of the UBC Benchmark Structural Model", 14th Engineering Mechanics Conference, Austin, TX.

Bernal, D. and Gunes, B. (2000). " Performance of an observer state-space identification in the presence of mild nonlinearities", 2000 American Control Conference, Chicago, Illinois.

Bernal, D. and Gunes, B. (1999). "Identification of system matrices from a minimum order state-space realization.", Memoria del XII Congreso Nacional de Ingenieria Sismica, Morelia, Mich., Mexico.

Bernal, D. (1999). "A dynamic stiffness formulation for the analysis of secondary systems", Earthquake Engineering and Structural Dynamics, Vol.28 pp.1295-1308.

Bernal, D. and Youssef, A. (1998). “A hybrid-time-frequency-domain formulation for nonlinear soil structure interaction”, Earthquake Engineering and Structural Dynamics, Vol.27, pp.673-685.

Bernal, D. (1998). “Instability of buildings during seismic response”,  Engineering Structures,Volume 20 , number 4-6 pp. 496-502

Bernal, D. and Youssef, A. (1998). “ Hybrid-methods for nonlinear soil-structure interaction” 12th Engineering Mechanics Conference, La Jolla, CA..

Bernal, D. Alarcon, E. and Tarnowski, M. (1998). “Effect of gap closure on displacements of seat type abutments during earthquakes”, 12th Engineering Mechanics Conference, La Jolla, CA.

Bernal, D. (1997). “Hybrid methods for nonlinear soil-structure-interaction”, 1st Iberoamerican conference on earthquake engineering, Santiago, Chile, pp.200-208.

Bernal, D. (1997). “ The hybrid-frequency-time-domain approach”, XI national congress on seismic engineering, Merida, Mexico, pp.301-309 (in Spanish).

Bernal, D. (1996). "The limit state of collapse in seismic design”, Xth Latinamerican Conference on Earthquake Engineering, Santo Domingo, D.R. (in Spanish).

Bernal, D. and Tarnowski M. (1996). "Residual moments in shakedown analysis”, Xth Mexican Conference on Structural Engineering, Merida, Mexico (in Spanish).

Sordo, E. and Bernal, D. (1996). "Collapse of eccentric systems”, Xth Mexican Conference on Structural Engineering, Merida, Mexico (in Spanish).

Bernal, D. (1996). "Influence of ground motion characteristics on the effectiveness of tuned mass dampers", XIth World Conference on Earthquake Engineering, Acapulco, Mexico.

Sordo, E. and Bernal D. (1996). "Dynamic instability phenomenon in bi-directional systems", XIth World Conference on Earthquake Engineering, Acapulco, Mexico.

Bernal, D. (1994). "Viscous damping in inelastic structural response", Journal of Structural Engineering, ASCE, Vol. 120, No.4, pp.1240-1254.

Popovic, S., Montans, F., Bernal, D. and Alarcon E. (1994). "Seismic modeling of bridges with semirigid connections", Proceedings of the Second State of the Art Workshop, COST C1, Prague.

Bernal, D. (1992). "Dynamic instability in buildings subjected to earthquakes", Journal of Structural Engineering, ASCE, Vol. 118, No.8, pp.2239-2260.

Sordo, E. and Bernal D. (1992). "Effect of torsional coupling on the stability of structures", Xth World conference on Earthquake Engineering, Madrid, Spain.

Bernal, D. (1991). "Dynamic instability in buildings", Proceedings of the 6th Canadian Conference on Earthquake Engineering, Toronto, pp. 85-92.

Bernal, D. (1991). "Locating events in step-by-step integration of the equations of motion", Journal of Structural Engineering, ASCE, Vol.117, No.2, pp. 530-545.

Bernal, D. (1991). "Locating events in numerical integration of piece-wise linear systems", International Journal Sismodinamica, Vol 2 pp. 31-49 (in Spanish).

Bernal, D. (1991). Discussion on "Scheme to improve numerical analysis of hysteretic dynamic systems", Journal of the Structural Engineering, ASCE, Vol.117, No.1, pp. 307-308.

Bernal, D. and El Kordi, E. (1990). "Statistical analysis of the response at collapse", Proceedings of the 1st Alexandria Conference on Structures and Geotechnical Engineering, Alexandria, Egypt.

Bernal, D. (1989). "Dynamic instability", VIII National Conference on Earthquake Engineering, Acapulco,Mexico, Vol I, pp. B-119 - B-121 (in Spanish).

Bernal, D. and Fernandez, E. (1988). "Dynamic instability during seismic response", Proceedings of the Fifth Chilean Conference on Earthquake Engineering, Santiago de Chile (in Spanish).

Bernal, D. (1987). "Amplification factors for nonlinear dynamic P-delta effects in earthquake analysis", Earthquake Engineering and Structural Dynamics, Vol. 15, No 5, pp. 635-651.

Bernal, D. (1987). "P-delta effects in the inelastic responses of multistory buildings", Proceedings of the Pacific Conference on Earthquake Engineering, Wairakei, New  Zealand.

Bernal, D. (1986). "Amplification factors for nonlinear P-delta effects in earthquake response", Proceedings of the Eighth Symposium on Earthquake Engineering, Roorkee, India, Vol.I, pp. 443-450.

Bernal, D. (1984). "Inelastic response of concrete frames designed in accordance with the Mexican Seismic Code", Proceedings of the Eighth World Congress on Earthquake Engineering, San Francisco, California, Volume V, pp. 507-514.

Burdette, E.G., Goodpasture, D.W. and Bernal, D. (1984). "Design of reinforced concrete frames using inelastic response spectra", Proceedings of the Eighth World Congress on Earthquake Engineering, San Francisco, California, Volume V, pp. 499-506.

Bernal, D. (1982). "Transverse flexure in box girders", Proceedings of the Third National Congress of Structural Engineering, Morelia, Michoacan, Mexico, pp. 1 - 19 (in Spanish).

Enis, R.O., Bernal, D. and Burdette E.G. (1980). "A design guide for evaluation of barriers for impact from whipping pipes", Specialty Conference on Civil Engineering and Nuclear Power Section 2, Impulsive and Impactive Loads, ASCE, Knoxville, Tennessee.

Burdette, E.G. and Bernal, D. (1978). "Ductility ratio of slabs", Journal of Structural Engineering, Vol.104, No. ST11, pp. 1741-1748.