List of Documents where Dr. Gupta's Publications have been Cited

Dr. Surendra M. Gupta



Dr. Gupta's publications have been cited by many authors in numerous journals, proceedings, books, reports and dissertations. The following is a list of documents (not exhaustive) where Dr. Gupta's publications have been cited. Several of the following documents cite multiple publications of Dr. Gupta's work. The following list alone is responsible for a total of over 5300 hits of Dr. Gupta's publications.


First Author

Title, Reference, and Date of Document Citing Dr. Gupta's Publication(s)

Gupta

"Optimal Storage of Books by Size: An Operational Research Approach", Journal of the American Society for Information Science, Vol. 25, No. 6, 354-357, 1974.

Buckland

"Notes on the Gupta-Ravindran Optimal Storage Model", Journal of the American Society for Information Science, Vol. 26, No. 6, 351-352, 1975.

Grosch

"Library Automation", in Annual Review of Information Science and Technology, Edited by M. Williams, American Society for Information Science, Washington, DC, USA, pp. 225-266, ISBN: 0-87715-212-8, 1976.

Leimkuhler

"Operations Research", in Encyclopedia of Library and Information Science, Volume 20, Edited by A. Kent, H. Lancour and J. E. Daily, Marcel Dekker, Inc., New York, USA, pp. 412-439, ISBN: 0-8247-2020-2, 1977.

Radhakrishnan

"On Optimal Storage of Books by Size", Journal of the American Society for Information Science, Vol. 29, No. 5, 253-254, 1978.

Gupta

"Machining Parameter Optimization for Multistation Synchronous Machines", American Society of Mechanical Engineering Paper No. 80-DET-60, 1-9, July 1980.

Geyer

"Recognition/Confusion of Dot Matrix Versus Conventional Font Capital Letters", Perception and Psychophysics, Vol. 29, 3, 280-282, 1981.

Berlin

"Decision Support System for Emergency Egress Legislation", Proceedings of the Northeast American Institute for Decision Sciences Conference, 121-123, 1981.

Rowley

"Operations Research: A Tool for Library Management",American Library Association, Chicago, ISBN: 0-8389-0337-1, 1981.

Berlin

"Modeling Emergency Evacuation from Group Homes", Journal of Fire Technology, Vol. 18, No. 1, 38-48, 1982.

Geyer

"Confusion Matrices as a Tool for Print Quality Evaluation", Proceedings of the National Print Quality Conference, 263-270, 1982.

Gupta

"A Simulation Model for Automated Planning and Optimization of Machining Conditions on Multi-Station Synchronous Machines", Journal of Engineering Sciences, Vol. 8, No. 1, 21-29, 1982.

Sergent

"The Cerebral Balance of Power - Confrontation or Cooperation", Journal of Experimental Psychology - Human Perception and Performance, Vol. 8, No. 2, 253-272, 1982.

Gupta

"Effect of Font and Medium on Recognition/Confusion", Proceedings of CHI'83 Human Factors in Computing Systems, 144-149, 1983.

Arani

"A Variable Memory Model of Visual Search", Human Factors, Vol. 26, No. 6, 631-639, 1984.

Srinivasan

"Evolutionary Trends in Generative Process Planning", in Methods and Tools for computer Integrated Manufacturing, edited by U. Rembold and R. Dillmann, (Lecture Notes in Computer Science, 168), Berlin; New York: Springer-Verlag, pp. 179-193, 1984.

Gupta

"Policy Modeling for Emergency Evacuation of the Elderly and the Developmentally Disabled", in System Science in Health-Social Services for the Elderly and the Disabled, edited by C.Tilquin, System Science Press, 691-694, 1985.

Ling

"Modeling of Fire Spread Through Probabilistic Networks", Fire Safety Journal, Vol. 9, No. 3, 287-300, 1985.

Khoshnevis

"Managing the Microcomputer Memory to Solve Larger Scale I.E. Problems", Computers and Industrial Engineering, Vol. 10, No. 3, 263-272, 1986.

Sergent

"Role of Input Factors in Visual-Field Asymmetries", Brain and Cognition, Vol. 5, No. 2, 174-199, 1986.

Suen

"Human Recognition of Handprinted Characters and Distance Measurements", in Graphonomics: Contemporary Research in Handwriting, edited by H. S. R. Kao, G. P. Van Galen, and R. Hoosain, Elsevier Science Publishers B.V. (North-Holland), pp. 213-224, 1986.

Watts

"Computer Models for Evacuation Analysis", Fire Safety Journal, Vol. 12, No. 3, 237-245, 1987.

Gupta

"Exploring the impact of reality on MRP performance", in Proceedings of the Northeast Decision Science Institute Conference, Newport, R.I., 13-15, 1988.

Cooper

"A Cost Comparison of Alternative Book Storage Strategies", Library Quarterly, Vol. 59, No. 3, 239-260, 1989.

Fisher

"Minimizing the Time to Search Visual Displays: The Role of Highlighting", Human Factors, Vol. 31, No. 2, 167-182, 1989.

Wooding

Wooding, D. S., "Modelling Aspects of Search Performance in Human Vision", Master's Thesis, (Advisor: Dr. John Barbur), Department of Optometry and Visual Science, The City University, London, November 1989.

Brennan

"Designing a Materials Management Support System Using Artificial Intelligence and Simulation", Proceedings of the Conference on Practice and Theory of Operations Management, Logistique 89, Paris, 235-242, December 1989.

Brennan

"Development of an Intelligent Adviser as a Decision Support System for the Materials Management Function in the Manufacturing Environment", Expert Systems and the Leading Edge in Production and Operations Management, edited by K. R. Karwan and J. R. Sweigart, South Carolina, 303-310, 1989.

Hassan

"Experimental Modelling and Optimization of Turning Medium Carbon Steel", International Journal of Production Research, Vol. 28, No. 6, 1057-1065, 1990.

Egghe

"Introduction to Informetrics: Quantitative Methods in Library, Documentation and Information Science", Elsevier Science & Technology, Amsterdam, The Netherlands, ISBN: 978-0444884930, 1990.

Brennan

"Modeling of Just-in-Time Systems Using a Rapid Modeling System", Just-In-Time Manufacturing Systems, edited by A. Satir, Elsevier Science Publishers, Amsterdam, The Netherlands, 141-148, 1991.

Gupta

"A Structured Analysis of MRP Systems Under Supply Uncertainty", Proceedings of the International Conference of the Decision Science Institute, 216-219, 1991.

Garg

“Quantitative Methods in Information Science: An Overview”, Collection Management, Vol. 14, No. 3-4, 75-100, 1991.

Kostreva

"Optimization Models in Fire Egress Analysis for Residential Buildings", Proceedings of the Third International Symposium on Fire Safety Science, Edinburgh, Scotland, pp. 805-814, July 14-8-12, 1991.

Gupta

"Lot Sizing and Backordering in Multi-Level Product Structures", Production and Inventory Management Journal, Vol. 33, No. 1, 27-35, 1992.

Fisher

"Optimal Symbol Set Selection: A Semiautomated Procedure", Human Factors, Vol. 34, No. 1, 79-95, 1992.

Gupta

"Evaluation of the Influence of Combined Supply/Demand Uncertainties in Materials Management", Proceedings of the 1992 Northeast Decision Sciences Conference, 340-342, 1992.

Eom

"Expert System Applications in Production and Operations Management: A Selected Bibliography (1975-1989)", Expert Systems With Applications, Vol. 5, No. 1-2, 167-183, 1992.

Gupta

"A Knowledge Based System for Combined Just-in-Time and Material Requirements Planning", Computers and Electrical Engineering, Vol. 19, No. 2, 157-174, 1993.

Brennan

"A Structured Analysis of Material Requirements Planning Systems under Combined Demand and Supply Uncertainty", International Journal of Production Research, Vol. 31, No. 7, 1689-1707, 1993.

Sum

"Effects of Product Structure Complexity on Multi-Level Lot Sizing", Decision Sciences, Vol. 24, No. 6, 1135-1156, 1993.

Gupta

"The Performance of Materials Management in Multi-Level Product Structures with Demand Uncertainty and Back-Ordering", Computers and Industrial Engineering, Vol. 25, No. 1, 89-92, 1993.

Gupta

"Uncertainty and Back-Ordering in Multi-Level Product Structures", Proceedings of the 1993 Northeast Decision Sciences Institute Conference, 328-330, 1993.

Barbur

"Eye Movements and Search Performance", in Visual search 2, Edited by David Brogan, Alastair Gale and Karen Carr, Taylor & Francis, London, pp. 253-264, Chapter 19, ISBN: 0-7484-0010-9, 1993.

Gupta

"Finite Source Erlang Based Queueing Systems: Complementarity, Equivalence and Their Implications", Computers and Mathematics with Applications, Vol. 28, No. 6, 57-74, 1994.

Petrovic

"Fuzzy Knowledge-Based Approach to Treating Uncertainty in Inventory Control", Computer Integrated Manufacturing Systems, Vol. 7, No. 3, 147-152, 1994.

Gupta

"Lead Time Uncertainty with Back-Ordering in Multi-Level Product Structures", Computers and Industrial Engineering, Vol. 26, No. 2, 267-278, 1994.

Reisman

"Operations Research in Libraries", Operations Research, Vol. 42, 34-40, 1994.

Gupta

"Solution to Complex Queueing systems: A Spreadsheet Approach", Performance Evaluation Review, Vol. 21, No. 3, 33-46, 1994.

Al-Turki

Al-Turki, Y. A. Y., "Flexible Kanban System", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Industrial Engineering and Information Systems, Northeastern University, June 1994

Gupta

"Customer Integrated Production System Analysis", Proceedings of the 1994 Northeast Decision Sciences Institute Conference, 242-244, 1994.

Kavusturucu

"Analysis of Flexible Manufacturing Systems with Finite Buffers and Unreliable Machines", Proceedings of the International Machine Design and Production Conference, 229-236, 1994.

Karaesmen

"A Comparison of Continuous versus Periodic Review of Order Levels to Control a Make-to-Order Production System", Proceedings of the 1995 Northeast Decision Sciences Institute Conference, 413-415, 1995.

Drury

"A Test of Economic Models of Stopping Policy in Visual Search", IIE Transactions, Vol. 27, No. 3, 382-393, 1995.

Gupta

"Interrelationship Between Controlling Arrival and Service in Queueing Systems", Computers and Operations Research, Vol. 22, No. 10, 1005-1014, 1995.

Gupta

"MRP Systems Under Supply and Process Uncertainty in an Integrated Shop Floor Control Environment", International Journal of Production Research, Vol. 33, No. 1, 205-220, 1995.

Gupta

"N-Policy Queueing System with Finite Population", Transactions on Operational Research, Vol. 7, No. 1, 45-62, 1995.

Gupta

"Queueing Model with State Dependent Balking and Reneging: Its Complementary and Equivalence", Performance Evaluation Review, Vol. 22, No. 4, 63-72, 1995.

Moore

"Stochastic Colored Petri Net Models of Flexible Manufacturing Systems: Material Handling Systems and Machining", Computers and Industrial Engineering, Vol. 29, No. 1, 333-337, 1995.

Gupta

"The Effect of Machine Breakdown on the Performance of a JIT System", Proceedings of the 26th Annual Meeting of Decision Sciences Institute, 1135-1137, 1995.

Kavusturucu

Kavusturucu, A., "Analysis of Manufacturing Systems with Machine Unavailability", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, October 1995.

Taleb

Taleb, K., "Disassembly Scheduling", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Industrial Engineering and Information Systems, Northeastern University, January 1995.

Grossman

"JEI: Just-Enough-Information Paradigm for Production Scheduling in a Manufacturing Supply Network", ISI Research Report (Report No. ISI/RR-95-402), Information Sciences Institute, University of Southern California, May 1995.

Kurtulus

"A Statistical Analysis of Yield Loss in Material Requirements Planning Systems", Production Planning and Control, Vol. 7, No. 1, 22-26, 1996.

Gupta

"An Algorithm to Disassemble Multiple Product Structures with Multiple Occurrence of Parts", Proceedings of the International Seminar on Reuse, Eindhoven, The Netherlands, 153-162, November 11-13, 1996.

Zeid

"An Analogical Problem Solving Approach to Planning for Disassembly", Proceedings of the Winter Annual Meeting of ASME (Design for Manufacturing and Assembly, DE-Vol. 89), Atlanta, Georgia, 79-89, November 17-22, 1996. 

Brennan

"Combined Demand and Lead Time Uncertainty with Back-Ordering in a Multi-Level Product Structure Environment", Production Planning and Control, Vol. 7, No. 1, 57-67, 1996.

Takahashi

"Comparing Integration Strategies in Production Ordering Systems", International Journal of Production Economics, Vol. 44, No. 1-2, 83-89, 1996.

Gupta

"Disassembly of Products", Computers and Industrial Engineering, Vol. 31, 225-228, 1996.

Moore

"Petri Net-Based Analysis and Simulation of Traditional and Flexible Kanban Control Policies", Proceedings of the Japan-USA Symposium on Flexible Automation, 1257-1262, 1996.

Moyer

"Simultaneous Component Sequencing and Feeder Assignment for High Speed Chip Shooter Machines", Journal of Electronics Manufacturing, Vol. 6, No. 4, 271-305, 1996.

Moyer

"SMT Feeder Slot Assignment for Predetermined Component Placement Paths", Journal of Electronics Manufacturing, Vol. 6, No. 3, 173-192, 1996.

Karaesmen

"The Finite Capacity GI/M/1 Queue with Server Vacations", Journal of the Operational Research Society, Vol. 47, No. 6, 817-828, 1996.

Benjaafar

"The New Operational Challenges Arising in Disassembly", Proceedings of the Environmentally Conscious Manufacturing and Design Conference, Cleveland, Ohio, 373-379, July 23-25, 1996.

Guide

"Delay Buffers in a Recoverable Manufacturing Environment", Proceedings of the First International Seminar on Reuse, Eindhoven, The Netherlands, November 11-13, pp. 133-142, 1996.

Guide

"Disassembly Operations for Recoverable Manufacturing Systems", Proceedings of the First International Seminar on Reuse, Eindhoven, The Netherlands, November 11-13, pp. 143-151, 1996.

Karaesmen

Karaesmen, F., "Duality for Finite Buffered Queues with Service and Arrival Control", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, June 1996.

Moyer

Moyer, L., "Assembly and Disassembly Models in Electronics Manufacturing", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, September 1996.

Moore

"Alpha/Sim Simulation Software Tutorial", Proceedings of the 1996 Winter Simulation Conference, pp. 522-529, 1996.

Baveja

"Derivation and Test of an Optimum Overlapping-Lobes Model of Visual Search", IEEE Transactions on Systems, Man and Cybernetics-Part A: Systems and Humans, Vol. 26, No. 1, 161-168, 1996.

Zeid

"A Case-Based Reasoning Approach to Planning for Disassembly", Journal of Intelligent Manufacturing, Vol. 8, No. 2, 97-106, 1997. 

Pelagagge

"Advanced Manufacturing System for Automotive Components Production", Industrial Management & Data Systems, Vol. 97, No. 8, 327-334, 1997.

Gupta

"An Algorithm to Dynamically Adjust the Number of Kanbans in a Stochastic Processing Times and Variable Demand Environment", Production Planning and Control, Vol. 8, No. 2, 133-141, 1997.

Moyer

"An Efficient Assembly Sequencing Heuristic for Printed Circuit Board configurations", Journal of Electronics Manufacturing, Vol. 7, No. 2, 143-160, 1997.

Gungor

"An Evaluation Methodology for Disassembly Processes", Computers and Industrial Engineering, Vol. 33, No. 1, 329-332, 1997.

Guide

"Buffering from Material Recovery Uncertainty in a Recoverable Manufacturing Environment" Journal of Operational Research Society, Vol. 48, No. 5, 519-529, 1997.

Karaesmen

"Control of Arrivals in a Finite Buffered Queue with Setup Costs", Journal of the Operational Research Society, Vol. 48, No. 11, 1113-1122, 1997.

Taleb

"Disassembly of Complex Products with Parts and Materials Commonality", Production Planning and Control, Vol. 8, No. 3, 255-269, 1997.

Taleb

"Disassembly of Multiple Product Structures", Computers and Industrial Engineering, Vol. 32, No. 4, 949-961, 1997.

Kuo

"Disassembly Planning Analysis for Electromechanical Products", Proceedings of the Winter Annual Meeting of ASME (Concurrent Product Design and Environmentally Conscious Manufacturing, DE-Vol. 94, MED-Vol. 5), Dallas, Texas, 225-241, November 16-21, 1997.

Veerakamolmal

"Disassembly Process Planning", Proceedings of the First International Conference on Engineering Design and Automation, Bangkok, Thailand, 162-165, March 18-21, 1997.

Karaesmen

"Duality Relations for Queues with Arrival and Service Control", Computers and Operations Research, Vol. 24, No. 6, 529-538, 1997.

Moyer

"Environmental Concerns and Recycling/ Disassembly Efforts in the Electronics Industry", Journal of Electronics Manufacturing, Vol. 7, No. 1, 1-22, 1997.

Zhang

"Environmentally Conscious Design and Manufacturing: A State of the Art Survey", Journal of Manufacturing Systems, Vol. 16, No. 5, 352-371, 1997.

Zhang

"Environmentally Conscious Design and Manufacturing: Concepts, Applications, and Perspectives", Proceedings of the Winter Annual Meeting of ASME (Concurrent Product Design and Environmentally Conscious Manufacturing, DE-Vol. 94, MED-Vol. 5), Dallas, Texas, 179-193, November 16-21, 1997.

Molinder

"Joint Optimization of Lot-Sizes, Safety Stocks and Safety Lead Times in an MRP System", International Journal of Production Research, Vol. 35, No. 4, 983-994, 1997.

Drexl

"Lot Sizing and Scheduling - Survey and Extensions", European Journal of Operational Research, Vol. 99, No. 2, 221-235, 1997.

Gupta

"Machine Interference Problem with Warm Spares, Server Vacations and Exhaustive Service", Performance Evaluation. Vol. 29, No. 3, 195-211, 1997.

Guide

"Product Structure Complexity and Scheduling of Operations in Recoverable Manufacturing" International Journal of Production Research, Vol. 35, No. 11, 3179-3199, 1997.

Ong

"Productivity Improvements for a Small 'Made to Order' Manufacturing Environment", Industrial Management & Data Systems, Vol. 97, No. 7, 251-258, 1997.

Fleischmann

"Quantitative Models for Reverse Logistics: A Review", European Journal of Operational Research, Vol. 103, No.1, 1-17, 1997.

Guide

"Scheduling Policies for Remanufacturing" International Journal of Production Economics, Vol. 48, 187-204, 1997.

Guide

"Scheduling with Priority Dispatching Rules and Drum-Buffer-Rope in a Recoverable Manufacturing System" International Journal of Production Economics, Vol. 53, 101-116, 1997.

Gregor

"Simulation: Strategic Technique for the Factory's Future", Simulation, Vol. 69, No. 5, 291-305, 1997.

Srinivasan

"A Framework for Virtual Disassembly Analysis", Journal of Intelligent Manufacturing, Vol. 8, No. 4, 277-295, 1997.

Srinivasan

"A Virtual Disassembly Tool to Support Environmentally Conscious Product Design", Proceedings of the 1997 IEEE International Symposium on Electronics and the Environment, San Francisco, CA, 1997, May 5-7, pp. 7-12, 1997.

Williams

"How Simulation Gains Acceptance as a Manufacturing Productivity Improvement Tool", Proceedings of the 11th European Simulation Multiconference, edited by Ali Riza Kaylan and Axel Lehmann, 3-7, 1997.

Uzsoy

"Production Planning for Companies with Product Recovery and Remanufacturing Capability", Proceedings of the 1997 IEEE International Symposium on Electronics and the Environment, San Francisco, CA, 1997, May 5-7, pp. 285-290, 1997.

Rojas

Rojas, Patricio A., "Numerical Solution of Queueing Models with Balking and Reneging", PhD Thesis, (Advisor: Dr. Mary Anne Staffeldt), Department of Industrial Engineering, New Mexico State University, Las Cruces, NM, July 1997.

van der Laan

Van der Laan, E., "The Effects of Remanufacturing on Inventory Control", PhD Thesis, (Advisors: Dr. J. A. E. E. van Nunen and R. Dekker), Erasmus University, Rotterdam, The Netherlands, October 1997.

Lee

Lee, Y.-J., "Adaptive and Artificial-Intelligence-Based Scheduling Methodologies Applied to Dual-Resource Constrained Assembly Systems", PhD Thesis, (Advisor: Dr. R. F. Perry), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, August 1997.

Bongaerts

"Reactive Scheduling in Holonic Manufacturing Systems: Architecture, Dynamic Model and Co-operation Strategy", Proceedings of ASI 97 (Advanced Summer Institute of the Network of Excellence on Intelligent Control and Integrated Manufacturing Systems), Budapest, July 14-17, pp. 1-8, 1997.

Bongaerts

"Cooperative Reactive Scheduling: Schedule Execution Using Perturbation Analysis", International Symposium on Non-Linear dynamics in production processes and systems, Hannover, Germany, September 17-18, pp. 1-30, 1997.

Cândido

Cândido, M. A. B., "A Hybrid Genetic Approach to Solve Real Make-to-Order Job Shop Scheduling Problems", PhD Thesis, (Advisors: Dr. R. M. Barcia and Dr. S. K. Khator), Graduate Program in Production Engineering, Federal University of Santa Catarina, Brazil, April 1997.

Barth

"Etude qualitative des relations entre parametres et indicteurs en gestion de production; le cas MRPII mone-niveau (Qualitative study of the relations between parameters and indicators in production control: case MRPII mono-level)", Second Franco-Québécois Congress of Industrial Engineering, (in French), September 3-5, - Albi 1997.

Moore

"Alpha/Sim Simulation Software Tutorial", Proceedings of the 1997 Winter Simulation Conference, pp. 632-639, 1997.

Ben-Hamida

Ben-Hamida, M, "The New Operational Challenges Arising from Disassembly", Master's Thesis, (Advisor: Dr. Saifallah Benjaafar), Department of Mechanical Engineering, University of Minnesota, March 1997.

Stanton

"Extension of Structured Petri Nets for the Control of a Conveyor System", Fifth International Conference on Factory 2000 - The Technology Exploitation Process, (IEE Conf. Publ. No. 435), Churchill College, Cambridge, UK, pp. 472-477, April 2-4,1997.

Kuo

Kuo, T.-C., "A Disassembly Model for End-of-Life Products Recycling", PhD Thesis, (Advisor: Professor H. C. Zhang), Department of Industrial Engineering, Texas Tech University, 1997.

Ferrer

Ferrer, G., "Managing the Recovery of Value from Durable Products", PhD Thesis, (Advisor: Professor R. U. Ayers), INSEAD, France, 1997.

Kavusturucu

"A Methodology for Analyzing Finite Buffer Tandem Manufacturing Systems with N-Policy", Computers and Industrial Engineering, Vol. 34, No. 4, 837-848, 1998.

Hsieh

"A Petri-Net-Based Structure for AS/RS Operation Modeling", International Journal of Production Research, Vol. 36, No. 12, 3323-3346, 1998.

Gupta

"Adapting Just-In-Time Manufacturing Systems to Preventive Maintenance Interruptions", Production Planning and Control, Vol. 9, No. 4, 349-359, 1998.

Xu

"An Integrated Methodology for Surface Mount PCB Configuration", Journal of Electronics Manufacturing, Vol. 8, No. 3-4, 225-234, 1998.

Chinnaiah

"Automation of Library Reshelving Operations", International Journal of Industrial Engineering, Vol. 5, No. 4, 308-315, 1998.

Caputo

"Computer Integrated Manufacturing in Small Companies: A Case Study", Industrial Management & Data Systems, Vol. 98, No. 3, 138-144, 1998.

Moyer

"Development of the Surface Mount Assembly Process Through and Angular Board Orientation" International Journal of Production Research, Vol. 36, No. 7, 1857-1881, 1998.

Silver

"Inventory Management and Production Planning and Scheduling", (p. 628), 3rd Edition, John Wiley and Sons, Inc., New York, 1998.

Silver

"Inventory Management and Production Planning and Scheduling", (p. 530), 3rd Edition, John Wiley and Sons, Inc., New York, 1998.

Krikke

"On a Medium Term Product Recovery and Disposal Strategy for Durable Assembly Products", International Journal of Production Research, Vol. 36, No. 1, 111-139, 1998.

Veerakamolmal

"Optimal Analysis of Lot Size Balancing for Multi-Products Selective Disassembly", International Journal of Flexible Automation and Integrated Manufacturing, Vol. 6. No. 3/4, 245-269, 1998. 

Cochran

"Optimum Junction Point Location and Inventory Levels in Serial Hybrid Push/Pull Production Systems", International Journal of Production Research, Vol. 36, No. 4, 1141-1155, 1998.

Guide

"Proactive Expediting Policies for Recoverable Manufacturing" Journal of Operational Research Society, Vol. 49, No. 5, 479-491, 1998.

Gupta

"Profitability Measure for Product Disassembly and Recycling ", Proceedings of the 1998 POMS-Cape Town Meeting, Cape Town, South Africa, June 29-July 2, pp. 139-147, 1998.

Karaesmen

"Service Control in a Finite Buffered Queue with Holding and Setup Costs", Transactions on Operational Research, Vol. 10, No. 1, 19-41, 1998.

O'Shea

"State of the Art Literature Survey on Disassembly Planning", Concurrent Engineering: Research and Applications, Vol. 6, No. 4, 345-357, 1998

Kavusturucu

"Tandem Manufacturing Systems with Machine Vacations", Production Planning and Control, Vol. 9, No. 5, 494-503, 1998.

Gupta

"The Effect of Sudden Material Handling System Breakdown on the Performance of a JIT System", International Journal of Production Research, Vol. 36, No. 7, 1935-1960, 1998.

Korugan

"A Multi-Echelon Inventory System with Returns", Computers and Industrial Engineering, Vol. 35, No. 1-2, 145-148, 1998.

Moore

"A Petri Net Approach to Disassembly Process Planning", Computers and Industrial Engineering, Vol. 35, No. 1-2, 165-168, 1998.

Veerakamolmal

"Design of an Integrated Component Recovery System", Proceedings of the 1998 IEEE International Symposium on Electronics and the Environment, Oak Brook, Illinois, May 4-6, pp. 264-269, 1998.

Moore

"Disassembly Petri Net Generation in the Presence of XOR Precedence Relationships", Proceedings of the 1998 IEEE International Conference on Systems, Man and Cybernetics, La Jolla, California, October 11-14, pp. 13-18, 1998.

Moore

"Disassembly Process Planning using Petri Nets", Proceedings of the 1998 IEEE International Symposium on Electronics and the Environment, Oak Brook, Illinois, May 4-6, pp. 88-93, 1998.

Gungor

"Disassembly Sequence Planning for Complete Disassembly in Product Recovery", Proceedings of the 1998 Northeast Decision Sciences Institute Conference, Boston, Massachusetts, 250-252, March 25-27, 1998.

Gungor

"Disassembly Sequence Planning for Products with Defective Parts in Product Recovery", Computers and Industrial Engineering, Vol. 35, No. 1-2, 161-164, 1998.

Veerakamolmal

"High-Mix/Low-Volume Batch of Electronic Equipment Disassembly", Computers and Industrial Engineering, Vol. 35, No. 1-2, 65-68, 1998.

Zha

"Integrated Intelligent Design and Assembly Planning: A Survey", International Journal of Advanced Manufacturing Technology, Vol. 14, No. 9, 664-685, 1998.

Zha

"Integrated Knowledge-Based Petri Net Intelligent Flexible Assembly Planning", Journal of Intelligent Manufacturing, Vol. 9, No. 3, 235-250, 1998.

Kizilkaya

"Material Flow Control and Scheduling in a Disassembly Environment", Computers and Industrial Engineering, Vol. 35, No. 1-2, 93-96, 1998.

Veerakamolmal

"Planning Components Recovery from Multiple Products", Proceedings of the 1998 Northeast Decision Sciences Institute Conference, Boston, Massachusetts, 270-272, March 25-27, 1998.

Kizilkaya

"Use of Flexible Kanban for Material Flow control in a Disassembly Process", Proceedings of the 1998 Northeast Decision Sciences Institute Conference, Boston, Massachusetts, 293-295, March 25-27, 1998.

Krikke

Krikke, H. R., "Recovery Strategies and Reverse Logistic Network Design", PhD Thesis, (Advisor: Dr. A. van Harten), University of Twente, Enschede, The Netherlands, April 1998.

Moore

Moore, K. E., "Petri Nets for Disassembly Process Planning and Performance Modeling of Flexible Kanban System", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, August 1998.

Bongaerts

Bongaerts, L., "Integration of Scheduling and Control in Holonic Manufacturing Systems", PhD Thesis, (Advisors: Prof. H. Van Brussel and Prof. D. Van Oudheusden), Katholieke Universiteit Leuven Faculteit Toegepaste Wetenschappen Arenbergkasteel, B-3001 Heverlee (Belgium), December 1998.

Moore

"Alpha/Sim Simulation Software Tutorial", Proceedings of the 1998 Winter Simulation Conference, pp. 289-296, 1998.

Zuo

"Colored Petri nets with changeable structure (CPNs-CS)", Proceedings of 2nd International Conference on Engineering Design and Automation, (CD-ROM), Hawaii, August 9-12, 1998.

Sorensen

"A Petri Net Model of a Continuous Flow Transfer Line with Unreliable Machines", RUCA Research Report No. 98/02, University of Antwerp (RUCA), Antwerp, Belgium, 1998.

Meixell

Meixell, M. J., "Modeling Demand Behavior in Manufacturing Supply Chains", PhD Thesis, (Advisor: Dr. David Wu), Department of Industrial and Manufacturing Systems Engineering, Lehigh University, Bethlehem, Pennsylvania, September 1998.

Gunasekaran

"Experiences of a Small Company in Productivity Improvements", Production and Inventory Management Journal, Vol. 39, No. 2, 49-54, 1998.

Pan

Pan, L., "A Knowledge Base for Indexing and Retrieving Disassembly Plans", Master's Thesis, (Advisor: Dr. Ibrahim Zeid), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, June 1998.

McCormick

McCormick, J. H., "AGSIM - A Simulation Tool to Study AGV Based Car Manufacturing Systems", Master's Thesis, (Advisor: Professor G. R. Chaprnan), University of Guelph, July 1998.

Keckler

"Material Reuse Modeling: A Case Study of Water Reuse, in an Industrial Park", Journal of Industrial Ecology, Vol. 2, No. 4, 79-92, 1998.

Saltar

Saltar, F. M. M., "A Methodology for the Analysis of the Environmental Performance of a Refrigerator's Life Cycle", Master's Thesis, (Advisor: Professor I. J. Baiges), Department of Mechanical Engineering, Univeristy of Puerto Rico, Mayaguez, Puerto Rico, 1998.

Wah

Wah, W. T., "Object-Oriented Methods for the Design of Automated Manufacturing Systems", PhD Thesis, (Advisor: Dr. K. L. Mak), Department of Industrilal and Manufacturing Systems Engineering, University of Hong Kong, 1998.

Bhoja

Bhoja, S., "Optimization of the Assignment of Printed Circuit Cards to Assembly Lines in Electronics Assembly", Master's Thesis, (Advisor: Dr. K. Ellis), Department of Industrial and Systems Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, September 1998.

Montes Jr.

Montes Jr., E. J., "The Multiple Resource Constrained Scheduling Problem", PhD Thesis, (Advisor: Dr. M. Smith), Department of Industrial Engineering, Texas Tech University, 1998.

Sridharan

"On the Characteristics of a Protective Two-Unit System", International Journal of Quality and Reliability Management, Vol. 15, No. 7, 712-718, 1998.

Kimms

"Multi-Level Lot Sizing – An Annotated Bibliography", in Beyond Manufacturing Resource Planning (MRP II), Edited by A. Drexl and A. Kimms, Springer-Verlag Berlin, pp. 184-216, ISBN: 3-540-64247-1, 1998.

Gaudette

Gaudette, K. J., "Material Requirements Planning in Air Force Depot-Level Maintenance", Master’s Thesis, (Advisor: Major Jim Burger), Air Force Institute of Technology, Wright-Patterson Air Force Base, Ohio, 1998.

Das

"Characterization of Material Outputs from an Electronics Demanufacturing Facility", Proceedings of the 1999 IEEE International Symposium on Electronics and the Environment, Danvers, Massachusetts, May 11-13, pp. 251-256, 1999.

Masui

"Development of Products Embedded Disassembly Process Based on End-of-Life Strategies", Proceedings of the First International on Environmentally Conscious Design and Inverse Manufacturing", Tokyo, Japan, Feb. 1-3, pp. 570-575, 1999.

Kavusturucu

"Expansion Method for the Throughput Analysis of Open Finite Manufacturing/ Queueing Networks with N-Policy", Computers and Operations Research, Vol. 26, No. 13, 1267-1292, 1999.

Gupta

"Flexible Kanban System", International Journal of Operations and Production Management, Vol. 19, No. 10, 1065-1093, 1999.

Erenguc

"Integrated Production/ Distribution Planning in Supply Chains: An Invited Review", European Journal of Operational Research, Vol. 115, No. 2, 219-236, 1999.

Angell

"Integrating Environmental Issues into the Mainstream: An Agenda for Research in Operations Management" Journal of Operations Management, Vol. 17, No. 5, 575-598, 1999.

Kavusturucu

"Manufacturing Systems with Machine Vacations, Arbitrary Topology and Finite Buffers", International Journal of Production Economics, Vol. 58, No. 1, 1-15, 1999.

Sodhi

"Modelling Material Separation Processes in Bulk Recycling", International Journal of Production Research, Vol. 37, No. 10, 2239-2252, 1999.

Simpson

"Multiple Level Production Planning In Rolling Horizon Assembly Environments", European Journal of Operational Research, Vol. 114, No. 1, 15-28, 1999.

Gupta

"N-Policy Queueing System with Finite Source and Warm Spares", Opsearch, Vol. 36, No. 3, 189-217, 1999.

Bras

"Product, Process, and Organizational Design for Remanufacture - An Overview of Research", Robotics and Computer Integrated Manufacturing, Vol. 15, No. 3, 167-178, 1999.

Guide

"Production Planning and Control for Remanufacturing: A State of the Art Survey" Robotics and Computer Integrated Manufacturing, Vol. 15, No. 3, 221-230, 1999.

Takahashi

"Reacting JIT Order Systems to the Unstable Changes in Demand", International Journal of Production Research, Vol. 37, No. 10, 2293-2313, 1999.

Srinivasan

"Selective Disassembly for Vitrual Prototying as Applied to De-Manufacturing", Robotics and Computer Integrated Manufacturing, Vol. 15, No. 3, 231-245, 1999.

Moore

"Stochastic Colored Petri Net (SCPN) Models of Traditional and Flexible Kanban Systems", International Journal of Production Research, Vol. 37, No. 9, 2135-2158, 1999.

Limam

"Towards a Communicating Petri Net Tool for Modeling Production Processes" Computers and Industrial Engineering, Vol. 37, No. 1 & 2, 493-496, 1999.

Gupta

"A Case-Based Reasoning Approach for the Optimal Planning of Disassembly Processes", Proceedings of the Second International Seminar on Reuse, Eindhoven, The Netherlands, March 1-3, pp. 141-150, 1999.

Veerakamolmal

"A Combinatorial Cost-Benefit Analysis Methodology for Designing Modular Electronic Products for the Environment", Proceedings of the 1999 IEEE International Symposium on Electronics and the Environment, Danvers, Massachusetts, May 11-13, pp. 268-273, 1999.

Guide

"A Queueing Network Model for Remanufacturing Production Systems", Proceedings of the Second International Seminar on Reuse, Eindhoven, The Netherlands, March 1-3, pp. 115-128, 1999.

Gungor

"A Systematic Solution Approach to the Disassembly Line Balancing Problem", Proceedings of the 25th International Conference on Computers and Industrial Engineering, New Orleans, Louisiana, March 29-April 1, pp. 70-73, 1999.

Aksoy

"An Analytical Model for Remanufacturing Systems", Proceedings of the 1999 Annual Meeting of the Northeast Decision Sciences Institute, Newport, Rhode Island, March 24-26, pp. 83-85, 1999.

Aksoy

"An Open Queueing Network Model for Remanufacturing Systems", Proceedings of the 25th International Conference on Computers and Industrial Engineering, New Orleans, Louisiana, March 29-April 1, pp. 62-65, 1999.

Nakashima

"Analysis of a Supplier Management system Using Generalized Stochastic Petri Net", Proceedings of the 25th International Conference on Computers and Industrial Engineering, New Orleans, Louisiana, March 29-April 1, 75-78, 1999.

Veerakamolmal

"Automating Multiple Products Disassembly Process Planning with Case-Based Reasoning", Proceedings of the Second International Conference on Operations and Quantitative Management, Ahmedabad, India, January 3-6, pp. 24-33, 1999.

Veerakamolmal

"Designing Electronic Products for Disassembly Using Cost/Benefit Analysis", Proceedings of the 1999 Annual Meeting of the Northeast Decision Sciences Institute, Newport, Rhode Island, March 24-26, pp. 189-191, 1999.

Beamon

"Designing the Green Supply Chain", Logistics Information Management, Vol. 12, No. 4, 332-342, 1999.

Gungor

"Disassembly Line Balancing", Proceedings of the 1999 Annual Meeting of the Northeast Decision Sciences Institute, Newport, Rhode Island, March 24-26, pp. 193-195, 1999.

Inman

"Environmental Management: New Challenges for Production and Inventory Managers", Production and Inventory Management Journal, Vol. 40, No. 3, 46-49, 1999.

Gungor

"Issues in Environmentally Conscious Manufacturing and Product Recovery: A Survey", Computers and Industrial Engineering, Vol. 36, No. 4, 811-853, 1999.

Jiang

"Object-Oriented Petri Nets with Changeable Structure (OPNs-CS) for Production system Modeling", International Journal of Advanced Manufacturing Technology, Vol. 15, No. 6, 445-459, 1999.

Guide

"Remanufacturing Production Planning and Control: U.S. Industry Practice and Research Issues", Proceedings of the Second International Seminar on Reuse, Eindhoven, The Netherlands, March 1-3, pp. 101-114, 1999.

Veerakamolmal

"Reusable-Component Requirements Planning for the Integrated Remanufacturing System", Proceedings of the 25th International Conference on Computers and Industrial Engineering, New Orleans, Louisiana, March 29-April 1, pp. 58-61, 1999.

Linton

"Towards an Operational Definition of Product Stewardship", Proceedings of the Second International Seminar on Reuse, Eindhoven, The Netherlands, March 1-3, pp. 177-194, 1999.

Gungor

Gungor, A., "Algorithmic Models for Analysis of Disassembly Processes and Systems", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, September 1999.

Veerakamolmal

Veerakamolmal, P., "Design and Analysis of Disassembly and Remanufacturing Systems in the Electronics Industry", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, June 1999.

Feldmann

"The Green Design Advisor: A Tool for Design for Environment", Journal of Electronics Manufacturing, Vol. 9, No. 1, 17-28, 1999.

Guide

"The Effect of Lead Time Variation on the Performance of Disassembly Release Mechanisms", Computers and Industrial Engineering, Vol. 36, No. 4, 759-779, 1999.

Jung

"Computer Take-back and Recycling: An Economic Analysis for Used Consumer Equipment", Journal of Electronics Manufacturing, Vol. 9, No. 1, 67-77, 1999.

Krikke

"Business Case Roteb: Recovery Strategies for Monitors", Computers and Industrial Engineering, Vol. 36, No. 4, 739-757, 1999.

Lambert

"Linear Programming in Disassembly/ Clustering Sequence Generation", Computers and Industrial Engineering, Vol. 36, No. 4, 723-738, 1999.

Linton

"Electronic Products at their End-of-Life: Options and Obstacles", Journal of Electronics Manufacturing, Vol. 9, No. 1, 29-40, 1999.

Rose

"Product End-of-Life strategy Categorization Design Tool", Journal of Electronics Manufacturing, Vol. 9, No. 1, 41-51, 1999.

Veerakamolmal

"Analysis of Design Efficiency for the Disassembly of Modular Electronic Products", Journal of Electronics Manufacturing, Vol. 9, No. 1, 79-95, 1999.

Viswanathan

"A Framework for the Flexible Grouping of Products for Disassembly", Journal of Electronics Manufacturing, Vol. 9, No. 1, 53-66, 1999.

Zhou

"Multi-lifecycle Product Recovery for Electronic Products", Journal of Electronics Manufacturing, Vol. 9, No. 1, 1-15, 1999.

Lambert

"Disassembly Process Modelling: Problems and Solutions Concerning their Adaptation to Practice", Proceedings of the 15th International Conference on Computer-Aided Production Engineering (CAPE'99), Durham, England, April 19-21, pp. 485-492, 1999.

Burke

"New Models and Heuristics for Component Placement in Printed Circuit Board Assembly", Proceedings of the 1999 IEEE International Conference on Information, Intelligence and Systems (ICIIS'99), Washington, DC, November 1-3, pp. 133-140, 1999.

Crama

"Production Planning Problems in Printed Circuit Board Assembly", Reports in Opeartions Research and Systems Theory (Report M 99-005), Maastricht University, Mathematics, PO Box 616, 6200 MD Maastricht, The Netherlands, December 23, 1999.

Kirchain

Kirchain, R. E., "Modeling Methods for Complex Manufacturing Systems: Studying the Effects of Materials Substitution on the Automobile Recycling Infrastructure", PhD Thesis, (Advisor: Dr. Joel P. Clark), Department of Materials Science and Engineering, Massachusetts Institute of Technology, February 1999.

Wang

"Optimization of High-Speed Multi-station SMT Placement Machines Using Evolutionary Algorithms", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 22, No. 2, 137-146, 1999

Nakashima

"Performance Evaluation of a Supplier Management System with Stochastic Variability", Proceedings of the Second Asia-Pacific Conference on Industrial Engineering and Management Systems, Kanazawa, Japan, October 30-31, pp. 409-412, 1999.

Meacham

"Optimal Disassembly Configurations for Single and Multiple Products", Journal of Manufacturing Systems, Vol. 18, No. 5, 311-322, 1999.

Elias

Elias, S. J. B., "Os Sistemas de Planejamento e Controle da Produção das Indústrias de Confecções do Estado do Ceará - Estudo de Múltiplos Casos (in Portuguese)", Master's Thesis, (Advisor: Dálvio Ferrari Tubino), Graduate Program in Production Engineering, Federal University of Santa Catarina, Brazil, June 1999.

Ammons

"Infrastructure Determination for Electronic Assembly Reverse Production Systems", Proceedings of the First International on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, Feb. 1-3, pp. 696-700, 1999.

Ammons

"Determining Reverse Production Systems Infrastructure for Electronic Assemblies", Proceedings of the 1999 IEEE International Symposium on Electronics and the Environment, Danvers, Massachusetts, May 11-13, pp. 257-262, 1999.

Melissen

"Defining Recovery Practices: Definitions and Terminology", International Journal of Environmentally Conscious Design and Manufacturing, Vol. 8, No. 2, 1-18, 1999.

Limam

Limam, Selma, "A Contribution to Modeling and Simulating Service Production Systems: An Approach Based on the Process Concept, on UML and on Petri Nets (in French)", PhD Thesis, (Advisor: Dr. Pierre Ladet), National Polytechnic Institute of Grenoble, France, December 1999.

Salum

Salum, Latif, "Improvements in Manufacturing Cell Design Based on New Classes of High Level Petri Nets", PhD Thesis, (Advisors: Dr. J. X. Gao and Dr. Tevor Shaw), Cranfield University, UK, 1999.

Hassan

"Lot-Size Decision Production Planning in Multi-Stage Manufacturing System", Proceedings of World Engineering Congress 99 & Exhibition (WEC'99), Kuala Lumpur, Malaysia, pp. 545-550, July 19-22, 1999.

Johnson

"Supply Chain Management", Research Report, The Tuck School of Business, Dartmouth College, July 27, 1999.

Moore

"Alpha/Sim Simulation Software Tutorial", Proceedings of the 1999 Winter Simulation Conference, pp. 267-275, 1999.

McMichael

"Recycling of Automobiles", Research Report (Materials Systems Lab Presentation Slides), MIT, Cambridge, Massachusetts, March 3, 1999.

Wu

"Manufacturing Planning over Alternative Facilities: Modeling, Analysis and Algorithms", Technical Report 99T-10, Department of IMSE, Manufacturing Logistics Institute, Department of IMSE, Lehigh University, Bethlehem, Pennsylvania 18015, 1999.

Yu

"Environmental Conscious Design: An Introduction to EDST", Transactions of the SDPS: Journal of Integrated Design and Process Science, Vol. 3, No. 4, pp. 27-38, December 1999.

Jiang

"Stochastic Object-Oriented Petri Nets (SOPNs) for Reliability Modeling of Manufacturing Systems", Proceedings of 1999 IEEE Canadian Conference on Electrical and Computer Engineering, Edmonton, Canada, May 9-12, pp. 1471-1476, 1999.

Ladet

"Decision-Making Concerning Production Processes Disturbances at Supervisory and Local Levels : A Petri Nets Approach", Proceedings of the Second European Control Conference (ECC'99), Karlsruhe, Germany, August 31 ­ September 3, CD-ROM, 1999.

Hochreiter

Hochreiter, T. A., "A Comparative Simulation Study of Kanban, CONWIP, and MRP Manufacturing Control Systems in a Flowshop", Master's Thesis, (Advisor: Dr. Suleyman Tufekci), Department of Industrial & Systems Engineering, University of Florida, May 1999.

Van der Laan

"Inventory Control for Joint Manufacturing and Remanufacturing", in Quantitative Models for Supply Chain Management, Edited by S. Tayur, R. Ganeshan and M. Magazine, Chapter 26, pp. 807-837, Kluwer Academic Publishers, ISBN: 0-7923-8344-3, 1999.

Boon

"Economic Modeling of Electric Vehicle Recycling", Proceedings of the International Symposium on Manufacturing and Robotics, Ottawa, Canada, August, pp. 1-8, 1999.

Suchyta

"Integration of Simulation, Statistical Analyses, and Optimization into the Design and Implementation of a Transfer-Line Manufacturing System", Proceedings of the 3rd International Conference on Engineering Design and Automation, 336-343, 1999.

Guide

"Product Acquisition Management: Current Industry Practice and a Proposed Framework", Proceedings of the 1999 Annual Meeting of the Decision Sciences Institute, New Orleans, Lousiana, November 20-23, pp. 1226-1228, 1999.

Takahashi

"A Reactive Kanban System by Allocation of the Number of Kanbans (in Japanese)", Journal of Japan Industrial Management Association, Vol. 50, No. 5, 333-340, 1999.

Allada

"Configuration Modeling for Parallel Disassembly Evaluation", Proceedings of the 8th Annual Industrial Engineering Research Conference: IERC-1999, Phoenix, Arizona, May 1999.

Viswanathan

"Biological Abstractions of the EOL Disassembly Problem", Proceedings of the 8th Annual Industrial Engineering Research Conference: IERC-1999, Phoenix, Arizona, May 1999.

Bryan

"Human Behaviour in Fire: The Development and Maturity of a Scholarly Study Area", Fire and Materials, Vol. 23, No. 6, 249-253, 1999.

Munie

"Environmental Issues In Electronics Assembly", Proceedings of Surface Mount Technology International 1999, San Jose, CA, September 12-13, 1999.

Yedlarajaiah

Yedlarajaiah, P. K., "Metrics for Estimating the Product Disassembly Effort", Master's Thesis, (Advisor: Dr. Sanchoy Das), New Jersey Institute of Technology, New Jersey, January 1999.

Vittes

Vittes, F. J., "Optimizing the Performance of a Chip Shooter Machine", Master's Thesis, (Advisor: Dr. K. P. Ellis), Department of Industrial and Systems Engineering, Virginia Polytechnic Institute and State University, 1999.

Yowell

Yowell, J. L., "A Companion Disassembly Algorithm for Three-Dimnsional Bin Pcking Schemes", Master's Thesis, (Advisor: Professor R. K. Ragade), Department of Mathematics and Computer Science, Univeristy of Louisville, 1999.

Yu

Yu, Y., "Modularity Analysis Scheme in Support of Environmentally Conscious Design for Electromechanical Products", PhD Thesis, (Advisor: Professor H. C. Zhang), Department of Industrial Engineering, Texas Tech University, 1999.

Proctor

"Index of Norms and Ratings Published in the Psychonomic Society Journals", Behavior Research Methods, Instruments, & Computers, Vol. 31, No. 4, 659-667, 1999.

Bauer

"A Virtual Prototyping System for Design for Assembly, Disassembly, and Service", International Journal of Agile Manufacturing, Vol. 2, No. 2, 119-138, 1999.

Goggin

"Modelling End-Of-Life Product Recovery Chains - a Case Study", Production Planning and Control, Vol. 11, No. 2, 187-196, 2000.

Das

"An Approach for Estimating the End-Of-Life Product Disassembly Effort and Cost", International Journal of Production Research, Vol. 38, No. 3, 657-673, 2000.

Takahashi

"Reactive Logistics in a JIT Environment", Production Planning and Control, Vol. 11, No. 1, 20-31, 2000.

Kuo

"Disassembly Sequence and Cost Analysis for Electromechanical Products", Robotics and Computer Integrated Manufacturing, Vol. 16, No. 1, 43-54, 2000.

Kerbache

"Multi-Objective Routing Within Large Scale Facilities Using Open Finite Queueing Networks", European Journal of Operational Research, Vol. 121, No. 1, 105-123, 2000.

Abboud

"Economic Lot Sizing with Consideration of Random Machine Unavailability Time", Computers and Operations Research, Vol. 27, No. 4, 335-351, 2000.

Gunasekaran

"Improving Operations Performance in a Small Company: A Case Study", International Journal of Operations and Production Management, Vol. 20, No. 3, 316-335, 2000.

Kuo

"Disassembly Analysis for Electromechanical Products: A Graph-Based Heuristic Approach", International Journal of Production Research, Vol. 38, No. 5, 993-1007, 2000.

Viswanathan

"Flexible Disassembly by Product Group Formation", Proceedings of the 2000 World Symposium on Group Technology/ Cellular Manufacturing, San Juan, Puerto Rico, March 27-29, pp. 61-66, 2000.

Klomp

"The Feeder Rack Assignment Problem in PCB Assembly: A Case Study", International Journal of Production Economics, Vol. 64, No. 1-3, 399-407, 2000.

Guide

"A Review of Techniques for Buffering Against Uncertainty with MRP Systems", Production Planning and Control, Vol. 11, No. 3, 223-233, 2000.

Gupta

"Production Systems with Interruptions, Arbitrary Topology and Finite Buffers", Annals of Operations Research, Vol. 93, 145-176, 2000.

Rose

"A New Approach to End-of-Life Design Advisor (ELDA)", Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment, San Francisco, California, May 8-10, pp. 99-104, 2000.

Lu

"A Practical Framework for the Reverse Supply Chain", Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment, San Francisco, California, May 8-10, pp. 266-271, 2000.

Guide

"Production Planning and Control for Remanufacturing: Industry Practice and Research Needs", Journal of Operations Management, Vol. 18, No. 4, 467-483, 2000.

Jiang

"Temporized Coloured Petri Nets with Changeable Structure (CPN-CS) for Performance Modelling of Dynamic Production Systems", International Journal of Production Research, Vol. 38, No. 8, 1917-1945, 2000.

Sundar

Sundar, P. S., "Design Methodologies for Agile Production Systems", PhD Thesis, (Advisor: Dr. S. V. Kamarthi), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, June 2000.

Rose

"Tools for Building Product End-of-Life Strategy", Proceedings of the Third International Symposium for Tools and Methods of Competitive Engineering, Delft, The Netherlands, ISBN 90-407-1983-7, April 2000.

Tardif

"An Adaptive CONWIP System", Proceedings of the Manufacturing and Service Operations Management Conference, Ann Arbor, Michigan, June 26-27, CD-ROM, 2000.

Moore

"Base Kanbans", (p. 60), in Encyclopedia of Production and Manufacturing Management, Edited by Paul Swamidass, Kluwer Academic Publishers, ISBN: 0-7923-8630-2, 2000.

Moore

"Decision Horizon", (pp. 153-154), in Encyclopedia of Production and Manufacturing Management, Edited by Paul Swamidass, Kluwer Academic Publishers, ISBN: 0-7923-8630-2, 2000.

Moore

"Dynamic Kanban Control for JIT Manufacturing", (pp. 167-170), in Encyclopedia of Production and Manufacturing Management, Edited by Paul Swamidass, Kluwer Academic Publishers, ISBN: 0-7923-8630-2, 2000.

Klassen

"Environmental Issues and Operations Management", (pp. 187-192), in Encyclopedia of Production and Manufacturing Management, Edited by Paul Swamidass, Kluwer Academic Publishers, ISBN: 0-7923-8630-2, 2000.

White

"Just-In-Time Manufacturing", (pp. 325-330), in Encyclopedia of Production and Manufacturing Management, Edited by Paul Swamidass, Kluwer Academic Publishers, ISBN: 0-7923-8630-2, 2000.

Sengupta

"Kanban-Based Manufacturing Systems", (pp. 337-343), in Encyclopedia of Production and Manufacturing Management, Edited by Paul Swamidass, Kluwer Academic Publishers, ISBN: 0-7923-8630-2, 2000.

Gupta

"Disassembly", (pp. 163-164), in Encyclopedia of Production and Manufacturing Management, Edited by Paul Swamidass, Kluwer Academic Publishers, ISBN: 0-7923-8630-2, 2000.

Gupta

"Environmental Issues: Reuse and Recycling in Manufacturing Systems", (pp. 192-197), in Encyclopedia of Production and Manufacturing Management, Edited by Paul Swamidass, Kluwer Academic Publishers, ISBN: 0-7923-8630-2, 2000.

Moore

"Manufacturing Systems Modeling Using Petri Nets", (pp. 431-435), in Encyclopedia of Production and Manufacturing Management, Edited by Paul Swamidass, Kluwer Academic Publishers, ISBN: 0-7923-8630-2, 2000.

den Hond

"Industrial Ecology: A Review", Regional Environmental Change, Vol. 1, No. 2, 60-69, 2000.

Kazan

"New Lot-Sizing Formulations for Less Nervous Production Schedules", Computers and Operations Research, Vol. 27, No. 13, 1325-1345, 2000.

Messac

"Visualizing the Optimization Process in Real-Time Using Physical Programming", Engineering Optimization, Vol. 32, No. 6, 721-747, 2000.

Messac

"From the Dubious Construction of Objective Functions to the Application of Physical Programming", AIAA Journal, Vol. 38, No. 1, 155-163, 2000.

Messac

"The Ability of Objective Functions to Generate Points on Non-Convex Pareto Frontiers", AIAA Journal, Vol. 38, No. 6, 1084-1091, 2000.

Meziane

"Intelligent Systems in Manufacturing: Current Developments and Future Prospects", Integrated Manufacturing Systems, Vol. 11, No. 4, 218-238, 2000.

Guide

"Supply-Chain Management for Recoverable Manufacturing Systems", Interfaces, Vol. 30, No. 3, 125-142, 2000.

Rudi

"Product Recovery at the Norwegian National Insurance Administration", Interfaces, Vol. 30, No. 3, 166-179, 2000.

Tang

"Disassembly Modeling, Planning, and Application: A Review", Proceedings of the 2000 IEEE International Conference on Robotics and Automation, San Francisco, California, April pp. 2197-2202, 2000.

Zussman

"Design and Implementation of a Adaptive Process Planner for Disassembly Processes", IEEE Transactions on Robotics and Automation, Vol. 16, No. 2, 171-179, 2000.

Fleischmann

Fleischmann, M., "Quantitative Models for Reverse Logistics", PhD Thesis, (Advisors: Dr. J. A. E. E. van Nunen and R. Dekker), Erasmus University, Rotterdam, The Netherlands, October 2000.

Veerakamolmal

"Design for Disassembly, Reuse and Recycling", (Chapter 5, pp. 69-82), in Green Electronics/ Green Bottom Line: Environmentally Responsible Engineering, Edited by Lee Goldberg, Butterworth-Heinemann; (Newnes), ISBN: 0-7506-9993-0, 2000.

Gupta

"A Case-Based Reasoning Approach for Optimal Planning of Multi-Product/ Multi-Manufacturer Disassembly Processes", International Journal of Environmentally Conscious Design and Manufacturing, Vol. 9, No. 1, 15-25, 2000.

Gupta

"A Supply Chain Optimization Approach for Reverse Logistics of End-of-Life Products", Proceedings of the 2000 Annual Meeting of the Northeast Decision Sciences Institute, Atlantic City, New Jersey, March 22-24, pp. 262-264, 2000.

Kizilkaya

"A Modified Kanban System for Disassembly", Proceedings of the 2000 Annual Meeting of the Northeast Decision Sciences Institute, Atlantic City, New Jersey, March 22-24, pp. 239-241, 2000.

Aksoy

"Near Optimal Buffer Allocation Plan for Remanufacturing Systems", Proceedings of the 2000 Annual Meeting of the Northeast Decision Sciences Institute, Atlantic City, New Jersey, March 22-24, pp. 111-113, 2000.

Korugan

"A Kanban Control Mechanism for a Multi-Echelon Inventory System with Returns", Proceedings of the 2000 Annual Meeting of the Northeast Decision Sciences Institute, Atlantic City, New Jersey, March 22-24, pp. 105-107, 2000.

Aksoy

"Buffer Allocation Plan for Cellular Remanufacturing Systems", Proceedings of the 2000 World Symposium on Group Technology/ Cellular Manufacturing, San Juan, Puerto Rico, March 27-29, pp. 239-244, 2000.

Korugan

"Price Policies for a Hybrid System with Disposals", Proceedings of the 2000 World Symposium on Group Technology/ Cellular Manufacturing, San Juan, Puerto Rico, March 27-29, pp. 245-250, 2000.

Kizilkaya

"A Pull Control System for the Disassembly Environment", Proceedings of the 2000 World Symposium on Group Technology/ Cellular Manufacturing, San Juan, Puerto Rico, March 27-29, pp. 233-238, 2000.

Gupta

"An Optimization Approach for A Reverse Logistics Supply Chain", Proceedings of the 2000 World Symposium on Group Technology/ Cellular Manufacturing, San Juan, Puerto Rico, March 27-29, pp. 227-232, 2000.

Gupta

"A Bi-directional Supply Chain Optimization Model for Reverse Logistics", Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment, San Francisco, California, May 8-10, pp. 254-259, 2000.

Nakashima

"Analysis of a Just-in-Time Production system with Supplier Kanbans", Proceedings of the 2000 Annual Meeting of the Northeast Decision Sciences Institute, Atlantic City, New Jersey, March 22-24, pp. 221-223, 2000.

Huber

"Demontage-Primarebedarfsplanung", Umwelt, (in German) Vol. 30, No. 6, 56-59, 2000.

Huber

"On-demand orientierte Demontageplanung", UmweltWirtschaftsForum, (in German) Vol. 8, No. 3, 74-79, 2000.

Jeetendra

"Petri Nets for Project Management and Resource Levelling", International Journal of Advanced Manufacturing Technology, Vol. 16, No. 7, 516-520, 2000.

Huang

"Disassembly Sequence Generation Using a Neural Network Approach", Journal of Manufacturing Systems, Vol. 19, No. 2, 73-82, 2000.

Rao

"Performance Modelling of the M/G/1 Machine Repairman Problem with Cold-, Warm- and Hot-Standbys", Computers and Industrial Engineering, Vol. 38, No. 2, 251-267, 2000.

Burke

"Effective Heuristic and Metaheuristic Approaches to Optimize Component Placement in Printed Circuit Board Assembly", Proceedings of the Congress on Evolutionary Computation (CEC2000), San Diego, USA, July 16-19, pp. 301-308, 2000.

Zha

"Assembly/ Disassembly Task Planning and Simulation Using Expert Petri Nets", International Journal of Production Research, Vol. 38, No. 15, 3639-3676, 2000.

Goggin

"The Resource Recovery Level Decision for End-Of-Life Products", Production Planning and Control, Vol. 11, No. 7, 628-640, 2000.

Boon

"Economic Impact of Aluminum Intensive Vehicles on the US Automotive Recycling Infrastructure", Journal of Industrial Ecology, Vol. 4, No. 2, 117-133, 2000.

Garcia

"Reducing the Complexity of Geometric Selective Disassembly", Proceedings of the 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000), Takamatsu, Japan, October 30-November 5, Vol. 2, pp. 1474-1479, 2000.

Kizilkaya

"A New Approach to Material Control and Scheduling in a Disassembly Environment", Proceedings of the Fourth International Conference on EcoBalance, Tsubuka, Japan, October 31-November 2, 75-78, 2000.

Takahashi

"Agile Control in JIT Ordering Systems", International Journal of Agile Management Systems, Vol. 2, No. 3, 242-252, 2000.

Zeid

"A Case-Based Reasoning Disassembly System", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 186-193, 2000.

Zeid

"Disassembly Knowledge Representation via XML", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 179-185, 2000.

Dincer

"Economic Analysis of End-of-Life Computer Systems in Educational Institutions", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 36-43, 2000.

Aksoy

"Effect of Reusable Rate Variation on the Performance of Remanufacturing Systems", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 13-20, 2000.

Boon

"Economics of PC Recycling", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 29-35, 2000.

Kongar

"A Goal Programming Approach to the Remanufacturing Supply Chain Model", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 167-178, 2000.

Korugan

"Substitution Policies for a Hybrid System", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 1-6, 2000.

Veerakamolmal

"Optimizing the Supply Chain in Reverse Logistics", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 157-166, 2000.

Gungor

"Complications in Disassembly Line Balancing", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 289-298, 2000.

Lambert

"Optimum Disassembly Sequence Generation", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 56-67, 2000.

Johnson

"An Integrated Design Strategy for Product Life Cycle Management", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 78-84, 2000.

Kumaran D

"Tool to Incorporate Environmental Costs Into Life Cycle Assessment", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing (Vol. 4193), 124-134, 2000.

Kongar

"A Multi-Criteria Model for Remanufacturing", Proceedings of the Third International Conference on Operations and Quantitative Management, Sydney, Australia, December 17-20, pp. 290-297, 2000.

Rose

Rose, C. M., "Design for Environment: A Method for Formulating Product End-of-Life Strategies", PhD Thesis, (Advisors: Dr. K. Ishii and Dr. A. Stevels), Department of Mechanical Engineering, Stanford University, November 2000.

Guide

"Product Acquisition Management: Current Industry Practice and a Proposed Framework", International Journal of Production Research, Vol. 38, No. 16, 3779-3800, 2000.

Ou-Yang

"Evaluation of the Information Flow in a Hierarchical Shop Floor Control Framework", International Journal of Systems Science, Vol. 31, No. 8, 977-1001, 2000.

Guide

"Remanufacturing Production Planning and Control: U.S. Industry Practice and Research Needs", International Journal of Environmentally Conscious Design and Manufacturing, Vol. 9, No. 2, 3-14, 2000.

Grunow

"Simulation-Based Performance Analysis and Optimization of Electronics Assembly Equipment", International Journal of Production Research, Vol. 38, No. 17, 4247-4259, 2000.

Salum

"A New Class of a High-Level Petri Net for Modelling Logical OR Efficiently: Coloured AND/OR Petri Nets (CARPN)", International Journal of Production Research, Vol. 38, No. 18, 4671-4682, 2000.

Kasmara

"Perencanaan Produksi Untuk Sistem Produksi Gabungan Remanufacturing dan Manufacturing", Proceedings of the Seminar on Air - PPI Tokyo Institute of Technology, (in Indonesian), 73-78, 2000.

Beaulieu

" Dèfinir et Maitriser la Complexitè des Rèseaux de Logistique a Rebours", RIRL 2000, Les Troisièmes Rencontres Internationales, de la Recherche en Logistique, (in French), Trois-Rivières, May 9-11, 2000.

Guo

" Disassembly Model Based on Petri Net (in Chinese)", Journal of Mechanical Engineering of China, Vol. 11, No. 9, 1007-1009 and 1038, 2000.

Neuendorf

"Disassembly Scheduling with Parts Commonality Using Petri-Nets with Timestamps", Proceedings of the Workshop for Concurrency, Specification, and Programming (CS&P 2000), Berlin, Germany, pp. 165-176, October 9-11, 2000.

Kang

"A Simulation Study on Telephone Remanufacturing Processes", Research Report, Department of Mechanical Engineering, Swiss Federal Institute of Technology at Lausanne (EPFL), Lausanne, Switzerland, September 2000.

Moore

"Alpha/Sim Simulation Software Tutorial", Proceedings of the 2000 Winter Simulation Conference, pp. 259-267, 2000.

Ryu

"Production Planning for Recycle-Oriented Manufacturing System in a Supply Chain", Research Report, Department of Industrial Engineering, Pusan National University, Korea, July 2000.

Messac

"Introduction of a Product Family Penalty Function Using Physical Programming", Proceedings of the 8th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, September 6-8, Long Beach, CA, 2000.

Srisom

"The Assignment Problem (in Thai)", Research Report, Department of Material Handling Technology, King Mongkut's Institute of Technology, North Bangkok, Thailand, 2000.

Mangione

"Ordonnancement Dynamique D'une Chaîne De Traitement De Surface (in French)", Research Report, Institut National Polytechnique de Grenoble, France, 2000.

Lu

"Practical Benefits of a Reprocessing Model for Product Take-Back Centers", 5th World Congress on Integrated Resources Management (R'2000), June 5-9, Toronto, Canada, 2000.

Karlsson

"Development of Environmentally Conscious Products", Proceedings of the 1st Seminar on Product Development Methods, November 28-29, Dalarna University, Sweden, 121-126, 2000.

Helo

"Methodology for Predicting Manufacturing Yield for Printed Circuit Board Assembly Lines", Journal of Electronics Manufacturing, Vol. 10, No. 2, 115-126, 2000.

Stuart

"A Model for Discrete Processing Decisions for Bulk Recycling of Electronics Equipment", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 23, No. 4, 314-320, 2000.

Stuart

"A Refine-or-Sell Decision Model for a Station with Continuous Reprocessing Options in an Electronics Recycling Center", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 23, No. 4, 321-327, 2000.

Zhao

"Studying an Overload System Using Rotation", Acta Mathematicae Applicatae Sinica, Vol. 16, 274-282, 2000.

Melachrinoudis

"The Relocation of a Manufacturing/Distribution Facility from Supply Chain Perspectives: A Physical Programming Approach", Advances in Management Science, Kenneth Laurence, Editor, Elsevier Science Inc., Vol. 10, pp. 15-39, 2000.

Huber

"Primärbedarfsplanung im Rahmen On-Demand Orientierter Demontageplanung", 14th International Conference on Informatics for Environmental Protection (Umweltinformatik 2000), (in German), Bonn 2000.

Lee

"Production Planning for Recycle-Oriented Manufacturing System in a Supply Chain", Proceedings of the 2000 INFORMS/KORMS Conference, June 18-21, Seoul, Korea, 701-708, 2000.

Takahashi

"Improving Adaptability in Reactive JIT Ordering Systems", Proceedings of the 2000 INFORMS/KORMS Conference, June 18-21, Seoul, Korea, 133-140, 2000.

Morandin, Jr.

"A Modular Modeling Approach for Automated Manufacturing Systems Based on Shared Resources and Process Planning Using Petri Nets", Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, Nashville, Tennessee, October 8-12, pp. 3057-3062, 2000.

Seepersad

"A Quantitative Approach to Determining Product Platform Extent", Proceedings of 2000 ASME Design Engineering Technical Conference (DETC00/DAC), Baltimore, Maryland, (Paper No. DETC2000-DAC-14288), September 10-13, 2000.

Hernandez

"Commonalizing Subsystem Components to Facilitate Maintenance: A Game Theoretic Approach", AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, (Paper No. AIAA 2000-4806), September 6-8, 2000.

Kumanan

"Analyzing Product Development Time with Petrinets", Proceedings of the 19th All India Manufacturing Technology Design and Research Conference, Chennai, India, December 14-16, pp. 601-606, 2000.

Tseng

"An Approach to Disassembly Analysis from the Economic Viewpoint", Proceedings of the 5th International Conference on Industrial Engineering, Hsinchu, Taiwan, December 13-15, Paper No. 358, 2000.

Joo

"Remanufacturing Planning on a Single Facility (in Korean)", Journal of the Korean Operations Research and Management Science Society, Vol. 25, No. 4, 111-122, 2000.

Viswanathan

Viswanathan, S., "Investigations in the Design of Products and Factories for Ene-Of-Life Disassembly", Master's Thesis, (Advisor: Dr. Venkat Allada), University of Missouri, Rolla, 2000.

Van Hop

"PCB Assembly Sequence and Feeder Assignment Problem for the Case of Tchebyshev Robot Arm Motion-I: Basic Problem", Proceedings of the 2000 IEEE International Conference on Management of Innovation and Technology, pp. 919-924, November 12-15, 2000.

Munie

"Environmental Issues In Electronics Assembly", Journal of Surface Mount Technology, Vol. 13, No. 1, 15-20, 2000.

Realff

"Modeling and Decision-Making for Reverse Production System Design for Carpet Recycling", Journal of the Textile Institute, Vol. 91, Part 3, 168-186, 2000.

Helo

Helo, F., "Decision Support System to Predict the Manufacturing Yield of Printed Circuit Board Assembly Lines", Master's Thesis, (Advisors: Dr. J. Kobza and Dr. K. P. Elli), Department of Industrial and Systems Engineering, Virginia Polytechnic Institute and State University, 2000.

Suh

Suh, B.-G., "Disassembly Planning with Consideration of Rotational Motions", PhD Thesis, (Advisor: Professor T. C. Chang), Department of Industrial Engineering, Purdue University, 2000.

Srinivasan

Srinivasan, H., "Virtual Selective Disassembly Analysis pf Geometric Assembly Models", PhD Thesis, (Advisor: Professor R. Gadh), Department of Mechanical Engineering, University of Wisconsin, Madison, 2000.

Savaskan

Savaskan, R. C., "Management of Closed-Loop Supply Chains for Recoverable Products", PhD Thesis, (Advisor: Professor L. N. Van Wassenhove), INSEAD, France, 2000.

Fargier

“The Use of Possibilistic Decision Theory in Manufacturing Planning and Control: Recent Results in Fuzzy Master Production Scheduling”, in Scheduling under Fuzziness, edited by R. Slowinski and M. Hapke, (Series: Studies in fuzziness and soft computing: Vol. 37), Heidelberg, Physica-Verlag, pp. 45-59, 2000.

Hu

Hu, J., "Development of a Demanufacturing System Modeling and Simulation Tool", Master's Thesis, (Advisor: Dr. M. C. Zhou), Department of Electrical and Computer Engineering, New Jersey Institute of Technology, New Jersey, May 2000.

Jacobsson

Jacobsson, N., "Emerging Product Strategies: Selling Services of Remanufactured Products", Licentiate Thesis, (Advisors: Professor Thomas Lindhqvist and Chris Ryan), International Institute for Industrial Environmental Economics, Lund University, Lund, Sweden, 2000.

Gungor

"Disassembly Sequence Plan Generation Using a Branch and Bound Algorithm", International Journal of Production Research, Vol. 39, No. 3, 481-509, 2001.

Reddy

"Application of Petri Nets and a Genetic Algorithm to Multi-Mode Multi-Resource Constrained Project Scheduling", International Journal of Advanced Manufacturing Technology, Vol. 17, No. 4, 305-314, 2001.

Sodhi

"Models for Recycling Electronics End-Of-Life Products", OR Spektrum, Vol. 23, No. 1, 97-115, 2001.

Mahadevan

"Periodic Review Inventory Policies for Remanufacturing", Research Report, Indian Institute of Management, Banglore, India, January 2001.

Korugan

"A Single Stage Kanban Control System with Static Routing", Proceedings of the 2001 Annual Meeting of the Northeast Decision Sciences Institute, pp. 227-229, 2001.

Aksoy

"Effect of Reusable Rate Variation on the Optimal Buffer Allocation for Remanufacturing Systems", Proceedings of the 2001 Annual Meeting of the Northeast Decision Sciences Institute, pp. 116-118, 2001.

Kongar

"A Multi-Criteria Approach for Remanufacturing Model in a Disassembly-To-Order System", Proceedings of the 2001 Annual Meeting of the Northeast Decision Sciences Institute, pp. 221-223, 2001.

Gupta

"Aggregate-Planning for End-of-life Products", in Greener Manufacturing and Operations: From Design to Delivery and Back, Edited by Joseph Sarkis, Greenleaf Publishing Ltd., Sheffield, U.K., Chapter 14, 205-222, ISBN: 1-8747-1942-X, 2001.

Pan

"A Knowledge Base for Indexing and Retrieving Disassembly Plans", Journal of Intelligent Manufacturing, Vol. 12, No. 1, 77-94, 2001.

Shih

"Reverse Logistics System Planning for Recycling Electrical Appliances and Computers in Taiwan", Resources, Conservation and Recycling, Vol. 32, No. 1, 55-72, 2001.

Erdos

"Modelling and Evaluating Product End-Of-Life Options", International Journal of Production Research, Vol. 39, No. 6, 1203-1220, 2001.

Tardif

"An Adaptive Approach to Controlling Kanban Systems", European Journal of Operational Research, Vol. 132, No. 2, 411-424, 2001.

Huang

"Design, Analysis and Implementation of a Real-World Manufacturing Cell Controller Based on Petri Nets", International Journal of Computer Integrated Manufacturing, Vol. 14, No. 3, 304-318, 2001.

Moore

"Petri Net Approach to Disassembly Process Planning for Products with Complex AND/OR Precedence Relationships", European Journal of Operational Research, Vol. 135, No. 2, 428-449, 2001.

Gupta

"Product Recovery Using a Disassembly Line: Challenges and Solution", Proceedings of the 2001 IEEE International Symposium on Electronics and the Environment, 36-40, 2001.

Gao

"Fuzzy Reasoning Petri Nets for Demanufacturing Process Decision", Proceedings of the 2001 IEEE International Symposium on Electronics and the Environment, 167-172, 2001.

Tang

"A Systematic Approach to Disassembly Line Design", Proceedings of the 2001 IEEE International Symposium on Electronics and the Environment, 173-178, 2001.

Das

"The DBOM Standard: A Specification for Efficient Product Data Transfer Between Manufacturers and Demanufacturers", Proceedings of the 2001 IEEE International Symposium on Electronics and the Environment, 241-246, 2001.

Gungor

"A Solution Approach to the Disassembly Line Balancing Problem in the Presence of Task Failures", International Journal of Production Research, Vol. 39, No. 7, 1427-1467, 2001.

Hop

"Extended Dynamic Point Specification Approach to Sequencing Robot Moves for PCB Assembly", International Journal of Production Research, Vol. 39, No. 8, 1671-1687, 2001.

Viswanathan

"Configuration Analysis to Support Product Redesign for End-Of-Life Disassembly", International Journal of Production Research, Vol. 39, No. 8, 1733-1753, 2001.

Vidalis

"A Recursive Algorithm for Generating the Transition Matrices of Multistation Multiserver Exponential Reliable Queueing Networks", Computers and Operations Research, Vol. 28, No. 9, 853-883, 2001.

Teunter

"A Reverse Logistics Valuation Method for Inventory Control", International Journal of Production Research, Vol. 39, No. 9, 2023-2035, 2001.

Sarkis

"Manufacturing's Role in Corporate Environmental Sustainability: Concerns for the New Millennium", International Journal of Operations and Production Management, Vol. 21, No. 5/6, 666-686, 2001.

Tang

Tang, Y., "Modeling, Design and Scheduling of Computer Integrated Manufacturing and Demanufacturing Systems", PhD Thesis, (Advisors: Dr. M. C. Zhou and Dr. R. Caudill), Department of Electrical and Computer Engineering, New Jersey Institute of Technology, New Jersey, May 2001.

Ritchey

"Assessing the Technical and Economic Feasibility of Remanufacturing", Proceedings of the 12th Annual Conference of the Production and Operations Management Society (POMS-2001), Orlando, Florida, March 30-April 2, CD-ROM, 2001.

Wong

"Barriers to Implementation of Electronic End of Life Product Programs in the U.S.", Research Report, Studies in Environmental Sciences, University of California at Berkeley, California, 2001.

Van Hillegersberg

"Supporting Return Flows in the Supply Chain", Communications of the ACM, Vol. 44, No. 6, 74-79, 2001.

Lee

"Disassembly Planning and Scheduling: Review and Further Research", Journal of Engineering Manufacture, Vol. 215, No. B5, 695-709, 2001.

Wongvasu

Wongvasu, Naken, "Methodologies for Providing Rapid and Effective Response to Request for Quotation (RFQ) of Mass Customization Products", PhD Thesis, (Advisor: Dr. S. V. Kamarthi), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, June 2001.

Feldmann

"Computer-Based Product Structure Analysis for Technical Goods Regarding Optimal End-Of-Life Strategies", Journal of Engineering Manufacture, Vol. 215, No. B5, 683-693, 2001.

Wiendahl

"Flexible Disassembly systems - Layouts and Modules for Processing Obsolete Products", Journal of Engineering Manufacture, Vol. 215, No. B5, 723-732, 2001.

Caridi

"Buffering Against Lumpy Demand in MRP Environments: A Theoretical Approach and a Case Study", Proceedings of the Fourth Stimulating Manufacturing Excellence in Small and Medium Enterprises Conference (SMESME), Aalborg, Denmark, May 14-16, pp. 120-127, 2001.

Panero

"Pollution Prevention and Control Options: An Overview with Examples", Research Report, New York Academy of Sciences, June 2001.

Kumaran

"Environmental Life Cycle Cost Analysis of Products", Environmental Management and Health, Vol. 12, No. 3, 260-276, 2001.

Korugan

"A Single Stage Kanban Control System with Dynamic Routing", Proceedings of the 28th International Conference on Computers and Industrial Engineering, Cocoa Beach, Florida, March 5-7, pp. 214-219, 2001.

Aksoy

"Optimal Buffer Allocation of Unbalanced and Unreliable Remanufacturing Systems", Proceedings of the 28th International Conference on Computers and Industrial Engineering, Cocoa Beach, Florida, March 5-7, pp. 202-207, 2001.

Kongar

"Decision-Maker-Centered Disassembly Process Planning", Proceedings of the 28th International Conference on Computers and Industrial Engineering, Cocoa Beach, Florida, March 5-7, pp. 208-213, 2001.

Barla

"Just In Time Studies From Turkey: A Literature Review", Proceedings of the 28th International Conference on Computers and Industrial Engineering, Cocoa Beach, Florida, March 5-7, pp. 896-901, 2001.

Gupta

"Product Recovery via a Disassembly Line", Proceedings of the 2001 POMS-Sao Paulo Meeting, Sao Paulo, Brazil, August 11-14, pp. 162-170, 2001.

Gupta

"Disassembly Kanban System", Proceedings of the 2001 POMS-Sao Paulo Meeting, Sao Paulo, Brazil, August 11-14, pp. 356-362, 2001.

Gupta

"A Disassembly-To-Order System", Proceedings of the 2001 POMS-Sao Paulo Meeting, Sao Paulo, Brazil, August 11-14, pp. 331-338, 2001.

Mak

Mak, R. W. T., "Flexible Hoist Scheduling for Electronics Manufacturing", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, September 2001.

Zha

"Knowledge Intensive Petri Net Framework for Concurrent Intelligent Design of Automatic Assembly Systems", Robotics and Computer Integrated Manufacturing, Vol. 17, No. 5, 379-398, 2001.

Seo

"Optimal Disassembly Sequence Using Genetic Algorithms Considering Economic and Environmental Aspects", International Journal of Advanced Manufacturing Technology, Vol. 18, No. 5, 371-380, 2001.

Hernandez

"The Compromise Decision Support Problem: Modeling the Deviation Function as in Physical Programming", Engineering Optimization, Vol. 33, No. 4, 445-471, 2001.

Kungas

"Using Linear Logic Planning to Make Knowledge Bases Reactive", Proceedings of the Seventh Symposium on Programming Languages and Software Tools (SPLST'2001), Szeged, Hungary, June 15-16, pp. 135-148, 2001.

Ferrer

"On the Widget Remanufacturing Operation", European Journal of Operational Research, Vol. 135, No. 2, 373-393, 2001.

Sonnenberg

Sonnenberg, M., "Force and Effort Analysis of Unfastening Actions in Disassembly Processes", PhD Thesis, (Advisor: Dr. Raj S. Sodhi), Department of Mechanical Engineering, New Jersey Institute of Technology, New Jersey, May 2001.

Kongar

"Multi-Objective Optimization of Lot Size Balancing for Multi Products Selective Disassembly", in Multiple Criteria Decision Making in the New Millennium, Edited by Murat Koksalan and Stanley Zionts, Springer-Verlag, Lecture Notes in Economics and Mathematical Systems, Vol. 507, Berlin, Germany, pp. 338-347, ISBN: 3-540-42377-X, 2001.

Isaacs

"Product Design Optimization and Recycling Economics", in The Encyclopedia of Materials: Science and Technology, Edited by K. H. J. Buschow, R. W. Cahn, M. C. Flemings, B. Illschner, E. J. Kramer, and S. Mahajan, Elsevier Science, 7887-7893, ISBN: 0-08-043152-6, 2001.

Lambert

"Automatic Determination of Transition Matrices in Optimal Disassembly Sequence Generation", Proceedings of the 4th IEEE International Symposium on Assembly and Task Planning (ISATP2001), Soft Research Park, Fukuoka, Japan, May 28-29, pp. 220-225, 2001.

Touzanne

"Method of Disassembly Sequence Generation for Recycling System Design", Proceedings of the 4th IEEE International Symposium on Assembly and Task Planning (ISATP2001), Soft Research Park, Fukuoka, Japan, May 28-29, pp. 458-463, 2001.

Jiang

"Colored Petri Nets with Changeable Structures (CPN-CS) and Their Applications in Modeling One-Of-A-Kind (OKP) Production Systems", Computers and Industrial Engineering, Vol. 41, No. 3, 279-308, 2001.

Kuo

"Design for Manufacture and Design for 'X': Concepts, Applications and Perspectives", Computers and Industrial Engineering, Vol. 41, No. 3, 241-260, 2001.

Ferrer

"Communicating Product Recovery Activities: Processes, Objectives and Performance Measures", in Handbook of Environmentally Conscious Manufacturing, Edited by C. N. Madu, Kluwer Academic Publishers, Chapter 4, pp. 81-99, ISBN: 0-7923-8449-0, 2001.

Jain

"Solving Resource Contention Problem in FMS Using Petri Nets and a Rule-Based Approach", International Journal of Production Research, Vol. 39, No. 4, 785-808, 2001.

Savaskan

"The Strategic Decentralization of Reverse Channels and Prince Discrimination Through Buyback Payments", Research Paper number 1329, The Center of Mathematical Studies in Economics and Management Science, Kellogg Graduate School of Management, Northwestern University, September 2001.

Wongvasu

"Case-based Reasoning for Rapid Cost Estimation of Mass-Customized Products", Proceedings of the 2001 World Congress on Mass Customization and Personalization, (CD-ROM), Hong Kong, October 1-2, 2001.

Torre

"Analisis de la Separación Selectiva en los Hogares Dentro del Proceso de Logistica Inversa (Analysis of the selective separation in the homes within the process of inverse logistics)", (in Spanish), XI Congreso Nacional de Asociación Científica de Economía y Dirección de la Empresa (ACEDE), September 16-18, Zoragoza, España, 2001.

Hop

"Multiple Criteria Approach for Solving Feeder Assignment and Assembly Sequence Problem in PCB Assembly", Production Planning and Control, Vol. 12, No. 8, 736-744, 2001.

Jaber

"The Impact of Random Machine Unavailability on Inventory Policies in a Continuous Improvement Environment", Production Planning and Control, Vol. 12, No. 8, 754-763, 2001.

Jimenez

"Environmental Performance as an Operations Objective", International Journal of Operations and Production Management, Vol. 21, No. 12, 1553-1572, 2001.

Vachon

"Customers as Green Suppliers", in Greener Manufacturing and Operations: From Design to Delivery and Back, Edited by Joseph Sarkis, Greenleaf Publishing Ltd., Sheffield, U.K., Chapter 9, 136-149, ISBN: 1-8747-1942-X, 2001.

Beamon

"Performance Analysis of Conjoined Supply Chains", International Journal of Production Research, Vol. 39, No. 14, 3195-3218, 2001.

Neuendorf

"Disassembly Scheduling with Parts Commonality Using Petri-Nets with Timestamps", Fundamenta Informaticae, Vol. 47, 295-306, 2001.

Boon

Boon, J. E., "Economic Viability of U.S. Recycling Infrastructures for End-of-Life Automotive and Electronic Products", PhD Thesis, (Advisors: Dr. S. M. Gupta and Dr. J. A. Isaacs), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, December 2001.

Ammons

"Reverse Production System Design for Recycling under Uncertainty", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 1-12, 2001.

Veerakamolmal

"Cost-Benefit Study of Consumer Product Take Back Programs using IBM's WIT Reverse Logistics Optimization Tool", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 13-22, 2001.

Zeid

"Computational Algorithm to Evaluate Product Disassembly Cost Index", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 23-31, 2001.

Zuidwijk

"Disassembly for Recovery under Uncertainty", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 44-53, 2001.

Kongar

"Genetic Algorithm for Disassembly Process Planning", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 54-62, 2001.

Puente-Mendez

"Product Disassembly Scheduling using Graph Models", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 63-70, 2001.

Pomares-Baeza

"Disassembly Movements for Geometrical Objects Through Heuristic Methods", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 71-80, 2001.

Noble

"Evaluation of Facility Layout Alternatives for a Remanufacturing Environment", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 158-166, 2001.

Aksoy

"Capacity and Buffer Trade-Offs in a Remanufacturing System", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 167-174, 2001.

Korugan

"Adaptive Kanban Control Mechanism for a Single Stage Hybrid System", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II (Vol. 4569), 175-182, 2001.

Fleischmann

"Quantitative Models for Reverse Logistics", Lecture Notes in Economics and Mathematical Systems, Vol. 501, Berlin, Germany, ISBN: 3-540-41711-7, 2001.

Ellis

"Optimizing the Performance of a Surface Mount Placement Machine", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 24, No. 3, 160-170, 2001.

Tang

"An Integrated Approach to Disassembly Planning and Demanufacturing Operation", IEEE Transactions on Robotics and Automation, Vol. 17, No. 6, 773-784, 2001.

Messac

"Required Relationship Between Objective Function and Pareto Frontier Orders: Practical Implications", AIAA Journal, Vol. 39, No. 11, 2168-2174, 2001.

Landrieu

Landrieu, Antoine, "Reverse Logistics and Collection of End-Of-Life Technical Products - Vehicle Routing Problems with Constraints (in French)", PhD Thesis, (Advisors: Dr. Z. Zdenek Binder and Dr. M. Bernard Descotes-Genon), National Polytechnic Institute of Grenoble, France, September 2001.

Lambert

"Disassembly Aimed at Product Remanufacturing", Proceedings of the ASME 2001 Design Engineering Technical Conference and Computers and Information in Engineering Conference (DETC'01), (Paper No. DETC2001/CIE-21252), CD-ROM, 2001.

Messac

"Mathematical and Pragmatic Perspectives of Physical Programming", AIAA Journal, Vol. 39, No. 5, 885-893, 2001.

Ocal

"Imalat Hatlarini Analiz Eden Bir Yazilimin Gelistirilmesi ve Denenmesi (Development and Application of a Software for the Analysis of Production Lines)", Muhendis ve Makina (Engineer and Machinery) (in Turkish), Vol. 500, 2001.

Rose

"ELDA and EVCA: Tools for Building Product End-of-Life Strategy", Journal of Sustainable Product Design, Vol. 1, No. 3, 181-195, 2001.

Tuncel

"Modeling, Behavioral Analysis and Performance Evaluation of a Television Assembly Plant by Using Petri Nets", Proceedings of the 29th International Conference on Computers and Industrial Engineering, Montreal, Canada, November 1-3, pp. 608-613, 2001.

Sztrik

"Finite Source Queueing Systems and Their Applications" Research Report, Institute of Mathematics and Informatics, University of Debrecen, Debrecen, Hungary, 2001.

Jeong

Jeong, B, "A Framework of Process Automation for the Efficient Development of Shop Floor Control Systems (SFCSs)", Master's Thesis, (Advisor: Dr. Hyunbo Cho), School of Mechanical and Industrial Engineering, Pohang University of Science and Technology, Pohang, Korea, December 2001.

Kang

"A Simulation Study on Telephone Remanufacturing Processes", International Journal of Environmentally Conscious Design & Manufacturing, Vol. 10, No. 4, 2001.

Santochi

"Computer Aided Disassembly Planning: State of the Art and Perspectives", CIRP Annals, Vol. 50, No. 2, 507-529, 2001.

den Hond

"Industrial Ecology", (pp. 7320-7326), in International Encyclopedia of the Social and Behavioral Sciences, Edited by Neil J. Smelser and Paul B. Baltes, Elsevier Science, ISBN: 0-0804-3076-7, 2001.

Spicer

"A System for Third Party Demanufacturing is Proposed", Proceedings of 7th European Roundtable on Cleaner Production (ERCP), Lund, Sweden, May 2-4, CD-ROM, 2001.

Takahashi

"A Reactive Kanban System with a Neural Network (in Japanese)", Journal of Japan Industrial Management Association, Vol. 52, No. 1, 3-10, 2001.

Anonymous

"Computer Recycling Infrastructure in Canada" Research Report, Industry Canada Environmental Affairs Branch, Canada, March 2001.

Burke

"The Printed Circuit Board Assembly Problem: Heuristic Approaches for Multi-Headed Placement Machinery", Proceedings of the International Conference on Artificial Intelligence (ICAI2000) Volume III, Las Vegas, USA, pp. 1456-1462, June 25-28, 2001.

Rizk

"Supply Chain Flow Planning Methods: A Review of the Lot-Sizing Literature" Research Report, Centre de recherche sur les technologies de l’organisation réseau (CENTOR), Université Laval, QC, Canada, 2001.

Kasmara

"Production Planning in Remanufacturing/ Manufacturing Production System", Proceedings of the Second International on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, Dec. 11-15, pp. 708-713, 2001.

Hesselbach

"Approach of Substance Flow Oriented Closed Loop Supply Chain Management in the Electrical and Electronic Equipment Industry", Proceedings of the Second International on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, Dec. 11-15, pp. 725-728, 2001.

Ji

"Planning for Printed Circuit Board Assembly: The State-of-the-Art Review", International Journal of Computer Applications in Technology, Vol. 14, No. 4/5/6, 136-144, 2001.

Huber

"Recycling and Disassembly Planning", in Environmental Information Systems in Industry and Public Administration, Edited by Claus Rautenstrauch and Susanne Patig, Idea Group Publishing, Hershey, USA, Chapter 27, 397-419, ISBN: 1-930708-02-5, 2001.

Kochel

"KaSimIR – object-oriented Kanban Simulation Imaging Reality" Research Report, Technische Universitat Chemnitz, Germany, 2001.

Spengler

"Einsatz von Operations Research im produktbezogenen Umweltschutz - Stand und Perspektiven (Use of Operations Research in Product-Related Environmental Protection - Present and Future)", (in German), BETRIEBSWIRTSCHAFTLICHE FORSCHUNG UND PRAXIS, Vol. 53, No. 3, 227-224, 2001.

Ferguson

"A Decision Support Process for End of Life Product Recovery", Proceedings of the 7th International Conference on Concurrent Enterprising (ICE 2001), Bremen, Germany, June 27-29, pp. 441-449, 2001.

Kato

"A Control Design Approach for Complex Automatic Manufacturing Systems", Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, Tucson, Arizona, October 7-10, pp. 2475-2480, 2001.

Chen

Chen, Y., "Computer-Aided Design for Rapid Tooling: Methods for Mold Design and Design-For-Manufacture", PhD Thesis, (Advisor: Dr. D. W. Rosen), Department of Mechanical Engineering, Georgia Institute of Technology, 2001.

Zhang

Zhang, Y., "Environmentally Conscious Supply Chain", Master's Thesis, (Advisor: Professor H. C. Zhang), Department of Industrial Engineering, Texas Tech University, 2001.

Williams

Williams, J.-T., "Quantification and Analysis of Remanufacturing Waste Streams for Improving Product Design", Master's Thesis, (Advisor: Prof. L. Shu), Mechanical and lndustrial Engineering, University of Toronto, 2001.

Feldmann

"Assembly Process", in Handbook of Industrial Engineering: Technology and Operations Management, Edited by G. Salvendy, Wiley-Interscience, Chapter 13, pp. 401-446, ISBN: 978-0471330578, 2001.

Stuart

"Clean Manufacturing", in Handbook of Industrial Engineering: Technology and Operations Management, Edited by G. Salvendy, Wiley-Interscience, Chapter 16, pp. 530-543, ISBN: 978-0471330578, 2001.

Huber

Huber, A., "Planung und Steuerung industrieller Demontageprozesse mit PPS-Systemen", (in German), PhD Thesis, (Advisor: Prof. Dr. Claus Rautenstrauch), Otto-von-Guericke University, Magdeburg, 2001.

Hernandez

Hernandez, G., "Platform Design for Customizable Products as a Problem of Access in a Geometric Space", PhD Thesis, (Advisor: Dr. F. Mistree), Department of Mechanical Engineering, Georgia Institute of Technology, 2001.

Veerakamolmal

"A Case-Based Reasoning Approach for Automating Disassembly Process Planning", Journal of Intelligent Manufacturing, Vol. 13, No. 1, 47-60, 2002.

Shahabudeen

"Design of Bi-Criteria Kanban System Using Simulated Annealing Technique", Computers and Industrial Engineering, Vol. 41, No. 4, 355-370, 2002.

Inman

"Implications of Environmental Management for Operations Management", Production Planning and Control, Vol. 13, No. 1, 47-55, 2002.

Das

"Product Disassembly and Recycling in the Automotive Industry", in Mechanical Life Cycle Handbook, Edited by M. S. Hundal, Marcel Dekker, Inc., New York, Chapter 21, 499-521, ISBN: 0-8247-0572-6, 2002.

Sarkis

"Environmentally Friendly Manufacturing", in Mechanical Life Cycle Handbook, Edited by M. S. Hundal, Marcel Dekker, Inc., New York, Chapter 22, 523-553, ISBN: 0-8247-0572-6, 2002.

Huang

"Disassembly Matrix for Disassembly Processes of Products", International Journal of Production Research, Vol. 40, No. 2, 255-273, 2002.

Sawik

"Scheduling of Printed Wiring Board Assembly in Surface Mount Technology Lines", Journal of Electronics Manufacturing, Vol. 11, No. 1, 1-17, 2002.

Pfund

"The Impacts of Variability on Scheduling Approaches for a Printed Wiring Board Assembly Operation", Journal of Electronics Manufacturing, Vol. 11, No. 1, 19-31, 2002.

Mak

"Modeling of Material Handling Hoist Operations in a PCB Manufacturing Facility", Journal of Electronics Manufacturing, Vol. 11, No. 1, 33-50, 2002.

Li

"Component to Multi-Track Feeder Assignment and Board Sequencing in Printed Circuit Board Assembly", Journal of Electronics Manufacturing, Vol. 11, No. 1, 51-68, 2002.

Jeevan

"Optimization of PCB Component Placement Using Genetic Algorithms", Journal of Electronics Manufacturing, Vol. 11, No. 1, 69-79, 2002.

Boon

"Economic Sensitivity for End of Life Planning and Processing of Personal Computers", Journal of Electronics Manufacturing, Vol. 11, No. 1, 81-93, 2002.

Corbett

"Evaluating Environmental Performance using Statistical Process Control Techniques", European Journal of Operational Research, Vol. 139, No. 1, 68-83, 2002.

Bandivadekar

Bandivadekar, A. P., "Development of a Model for Material Flows and Economic Exchanges within the U. S. Automotive Life Cycle Chain", Master's Thesis, (Advisor: Dr. John W. Sutherland), Department of Mechanical Engineering, Michigan Technological University, Houghton, Michigan, USA, 2002.

Bandivadekar

"A Model for Material Flows and Economic Exchanges Within the U.S. Automotive Life Cycle Chain and its Sensitivity to Systemic Changes", Proceedings of the 9th CIRP Life Cycle Engineering Seminar, Erlangen, Germany, April 9-10, 2002.

Takahashi

"Decentralized Reactive Kanban System", European Journal of Operational Research, Vol. 139, No. 2, 262-276, 2002.

Rose

"Influencing Design to Improve Product End-Of-Life Stage", Research in Engineering Design, Vol. 13, No. 2, 83-93, 2002.

Tiwari

"A Petri Net Based Approach to Determine the Disassembly Strategy of a Product", International Journal of Production Research, Vol. 40, No. 5, 1113-1129, 2002.

Zha

"A Knowledge Petri Net Model for Flexible Manufacturing Systems and its Application for Design and Verification of FMS Controllers", International Journal of Computer Integrated Manufacturing, Vol. 15, No. 3, 242-264, 2002.

Das

"Process Planning for Product Disassembly", International Journal of Production Research, Vol. 40, No. 6, 1335-1355, 2002.

Marin Martinez

"Modular Simulation Tool for Modelling JIT Manufacturing", International Journal of Production Research, Vol. 40, No. 7, 1529-1547, 2002.

Kongar

"Disassembly-To-Order System Using Linear Physical Programming", Proceedings of the 2002 IEEE International Symposium on Electronics and the Environment, 312-317, 2002.

Fasano

"Optimizing Reverse Logistics Scenarios: A Cost-Benefit Study Using IBM's WIT Tool", Proceedings of the 2002 IEEE International Symposium on Electronics and the Environment, 306-310, 2002.

Das

"Strategies and Economics in the Disassembly of Personal Computers - A Case Study", Proceedings of the 2002 IEEE International Symposium on Electronics and the Environment, 257-262, 2002.

Teunter

"On the Non-Optimality of the Average Cost Approach for Inventory Models with Remanufacturing", International Journal of Production Economics, Vol. 79, No. 1, 67-73, 2002.

Messac

"Introduction of a Product Family Penalty Function using Physical Programming", Journal of Mechanical Design, Vol. 124, No. 2, 164-172, 2002.

Messac

"Effective Product Family Design Using Physical Programming", Engineering Optimization, Vol. 34, No. 3, 245-261, 2002.

Gao

"A Bin Assignment Algorithm for Demanufacturing Automation", Proceedings of the 2002 IEEE International Conference on Robotics and Automation, 2351-2356, 2002.

Ellis

"Development of a Placement Time Estimator Function for a Turret Style Surface Mount Placement Machine", Robotics and Computer Integrated Manufacturing, Vol. 18, No. 3-4, 241-254, 2002.

Desai

Desai, A., "A Design for Disassembly Algorithm Based on Quantitative Analysis of Design Parameters Affecting Disassemblability", Master's Thesis, (Advisor: Dr. Anil Mital), Department of Mechanical, Industrial and Nuclear Engineering, University of Cincinnati, May 2002.

Magazine

"A Multi-Exchange Neighborhood Search Heuristic for an Integrated Clustering and Machine Setup Model for PCB Manufacturing", Journal of Electronics Manufacturing, Vol. 11, No. 2, 107-119, 2002.

Lambert

"Demand Driven Disassembly Optimization for Electronic Products", Journal of Electronics Manufacturing, Vol. 11, No. 2, 121-135, 2002.

Tardif

"Understanding Forecast Variability in Contract Electronics Manufacturing", Journal of Electronics Manufacturing, Vol. 11, No. 2, 137-148, 2002.

Laakso

"Estimating the Production Times in PCB Assembly", Journal of Electronics Manufacturing, Vol. 11, No. 2, 161-170, 2002.

Rose

"Method for Formulating Product End-Of-Life Strategies for Electronics Industry", Journal of Electronics Manufacturing, Vol. 11, No. 2, 185-196, 2002.

Kongar

"A Multi-Criteria Decision Making Approach for Disassembly-To-Order Systems", Journal of Electronics Manufacturing, Vol. 11, No. 2, 171-183, 2002.

Koh

"Uncertainty Under MRP-Planned Manufacture: Review and Categorization", International Journal of Production Research, Vol. 40, No. 10, 2399-2421, 2002.

Bayhan

"Modelling, Behavioral Analysis and Performance Evaluation of an Automotive Assembly Plant Using Petri Nets", International Journal of Industrial Engineering, Vol. 9, No. 3, 238-247, 2002.

Tirpak

"A Generic Classification and Object-Oriented Simulation Toolkit for SMT Assembly Equipment", IEEE Transactions on Systems, Man and Cybernetics-Part A: Systems and Humans, Vol. 32, No. 1, 104-122, 2002.

Messac

"Production Planning Optimization with Physical Programming", Engineering Optimization, Vol. 34, No. 4, 323-340, 2002.

Lambert

"Determining Optimum Disassembly Sequences in Electronic Equipment", Computers and Industrial Engineering, Vol. 43, No. 3, 553-575, 2002.

Korugan

Korugan, A., "The Effect of Product Substitution on Single-Stage Hybrid Systems with Pull Type Control", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, May 2002.

Gungor

"Disassembly Line in Product Recovery", International Journal of Production Research, Vol. 40, No. 11, 2569-2589, 2002.

Ellis

"Optimization of the Assignment of Circuit Cards to Assembly Lines in Electronics Assembly", International Journal of Production Research, Vol. 40, No. 11, 2609-2631, 2002.

Lambert

"Generation of Assembly Graphs by Systematic Analysis of Assembly Structures", Proceedings of the 15th IFAC World Congress on Automatic Control (IFAC 2002), Barcelona, Spain, July 21-26, CD-ROM, 2002.

Caridi

"Managing Safety and Strategic Stocks to Improve Materials Requirements Planning Performance", Journal of Engineering Manufacture, Vol. 216, No. B7, 1061-1065, 2002.

Hong

"Sensitivity and Validity of Visual Search Models for Multiple Targets", Theoretical Issues in Ergonomics Science, Vol. 3, No. 1, 85-110, 2002.

Kungas

Kungas, P., "Linear Logic Programming for AI Planning", Master's Thesis, (Advisor: Dr. Tarmo Uustalu), Faculty of Information Technology, Tallinn Technical University, Tallinn, Estonia, May 2002.

Messac

"Multiobjective Robust Design using Physical Programming", Structural and Multidisciplinary Optimization, Vol. 23, No. 5, 357-371, 2002.

Koh

"Development of a Business Model for Diagnosing Uncertainties in ERP Environments", International Journal of Production Research, Vol. 40, No. 13, 3015-3039, 2002.

Rai

"Disassembly Sequence Generation: A Petri Net Based Heuristic Approach", International Journal of Production Research, Vol. 40, No. 13, 3183-3198, 2002.

Duta

"Conceptual Modeling of the Disassembly Processes", Studies in Informatics and Control Journal, Vol. 11, No. 2, 2002.

Dereli

"Atiklar ve Cevre Sorunlari: Muhendislik Cephesinden Cevre Sorunlarina Bakis", Endustri Muhendisligi (Industrial Engineering) (in Turkish), Vol. 13, No. 1, 2002.

Castillo

"Formal Modeling Methodologies for Control of Manufacturing Cells: Survey and Comparison", Journal of Manufacturing Systems, Vol. 21, No. 1, 40-57, 2002.

Yamada

"Application of Modeling and Petri Net concepts in the Productive Process of the Sugarcane Industry (in Portuguese)", Pesquisa Agropecuária Brasileira, Vol. 37, No. 6, 809-820, 2002.

Teunter

"Economic Order Quantities for Stochastic Discounted Cost Inventory Systems with Remanufacturing", International Journal of Logistics, Vol. 5, No. 2, 161-175, 2002.

Rom

"MRP in a Job Shop Environment Using a Resource Constrained Project Scheduling Model", Omega, Vol. 30, No. 4, 275-286, 2002.

Rajaram

"Achieving Environmental and Productivity Improvements Through Model-Based Process Redesign", Operations Research, Vol. 50, No. 5, 751-763, 2002.

Guy

"Design for Deconstruction and Materials Reuse", Proceedings of the CIB Task Group 39 - Deconstruction Meeting, Paper 15, Karlsruhe, Germany, April 9 2002.

Chen

"A Hybrid Genetic Algorithm for Solving Feeder Arrangement and Placement Sequencing Decisions in PCB Assembly", Proceedings of PCB Manufacturing Technology, Yuan-Ze University, Taiwan, 9-13, 2002.

Oetiker

"Abfall-Management von Elektronik-Produkten (Waste Management of Electronics Products)" (in German), Research Report, Swiss Federal Institute of Technology, Zurich, 2002.

Mo

"Virtual Disassembly", International Journal of CAD/CAM, Vol. 2, No. 4, 41-55, 2002.

Crama

"Production Planning Problems in Printed Circuit Board Assembly", Discrete Applied Mathematics, Vol. 123, No. 1-3, 339-361, 2002.

Lee

"Disassembly Scheduling with Capacity Constraints", CIRP Annals, Vol. 51, No. 1, 387-390, 2002.

Polak

"A Special Case of the Quadratic Assignment Model with an Application to Storage-and-Retrieval Devices", Proceedings of the Eleventh Latin-Iberian American Congress of Operations Research (IX CLAIO), University of Concepción, Chile, October 27-31, 2002.

Kungas

"Resource-Conscious AI Planning with Conjunctions and Disjunctions", Acta Cybernetica, Vol. 15, No. 4, 601-620, 2002.

Nakashima

"Analysis of a Product Recovery System", International Journal of Production Research, Vol. 40, No. 15, 3849-3856, 2002.

Arulmozhi

"Reliability of an M-Out-of-N Warm Standby System with R Repair Facilities", Opsearch, Vol. 39, No. 2, 77-87, 2002.

Chen

"Reduction of Printed Circuit Board Group Assembly Time Through the Consideration of Efficiency Loss of Placemnt Time", Assembly Automation, Vol. 22, No. 4, 360-370, 2002.

Kongar

"A Multiple Objective Heuristic for Disassembly Processing", Proceedings of the Fifth International Conference on EcoBalance, Tsubuka, Japan, November 6-8, pp. 511-514, 2002.

Kongar

"A Fuzzy Goal Programming Approach to Disassembly Planning", Proceedings of the Sixth Saudi Engineering Conference, Dhahran, Saudi Arabia, December 14-17, pp. 561-578, 2002.

Meade

"A Conceptual Model for Selecting and Evaluating Third-Party Reverse Logistics Providers", Supply Chain Management, Vol. 7, No. 5, 283-295, 2002.

Kongar

Kongar, E., "Multiple Criteria Decision Making Techniques for End-Of-Life Product Recovery", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, November 2002.

Reap

"Design for Disassembly and the Value of Robotic Semi-Destructive Disassembly", Proceedings of the ASME 2002 Design Engineering Technical Conference and Computers and Information in Engineering Conference (DETC'02), (CD-ROM Paper No. DETC2002/DFM-34181), Montreal, Canada, September 29-October 2, 2002.

Hernandez

"Designing for Maintenance: A Game Theoretic Approach", Engineering Optimization, Vol. 34, No. 6, 561-577, 2002.

Bryan

"Human Behavior in Fire", Fire Protection Engineering, No. 16, 4-10, Fall 2002.

Anonymous

"Evaluate Various Disassembly Sequences" (CDRL C006), Research Report, National Defense Center for Environmental Excellence, Arlington, VA, 2002.

Tang

"Disassembly Modeling, Planning, and Application", Journal of Manufacturing Systems, Vol. 21, No. 3, 200-217, 2002.

Gao

"Integration of Disassembly Leveling and Bin Assignment for Demanufacturing Automation", IEEE Transactions on Robotics and Automation, Vol. 18, No. 6, 867-874, 2002.

Fallah

"Integrated Material Planning and Operations Scheduling (IMPOS)", International Journal of Production Research, Vol. 40, No. 16, 4285-4304, 2002.

Ould-Louly

"Generalized Newsboy Model to Compute the Optimal Planned Lead Times in Assembly Systems", International Journal of Production Research, Vol. 40, No. 17, 4401-4414, 2002.

Modi

Modi, C., "Designing a Tool for Measuring Disassembly Efficiency", Master's Thesis, (Advisor: Dr. Luis Rene Contreras), Mechanical and Industrial Engineering Department, University of Texas at ElPaso, December 2002.

Takahashi

"Comparing Reactive Kanban and Reactive CONWIP", Production Planning and Control, Vol. 13, No. 8, 702-714, 2002.

Kang

"Disassembly Sequencing with Imprecise Data: A Case Study", Proceedings of the 7th International Conference on Industrial Engineering, Busan, Korea, October 24-26, pp. 534-537, 2002.

Toffel

"End-of-life Product Recovery: Drivers, Prior Research, and Future Directions", Conference on European Electronics Take-back Legislation: Impacts on Business Strategy and Global Trade, Center for the Management of Environmental Resources, INSEAD, Fontainebleau, Oct. 17-18, 2002.

Sethanan

"Cost Performance under Uncertainties in a Hybrid Flowshop Manufacturing Environment", Proceedings of The Fourth Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS'2002), Taipei, Taiwan, December 18-20, pp. 52-55, 2002.

Selvaraj

"Simulation Analysis of Pull Production System with Machine Breakdowns", Proceedings of The Fourth Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS'2002), Taipei, Taiwan, December 18-20, pp. 594-597, 2002.

Ji

"Determination of Component Placement Sequence: A Hybrid Genetic Algorithm Approach", Proceedings of The Fourth Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS'2002), Taipei, Taiwan, December 18-20, pp. 828-832, 2002.

Huang

"Using Neural Network and Genetic Algorithm for Disassembly Sequence Generation", Proceedings of The Fourth Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS'2002), Taipei, Taiwan, December 18-20, pp. 1443-1446, 2002.

Kim

"Stochastic Disaster Recovery Systems with External Resources", Mathematical and Computer Modelling, Vol. 31, No. 11-13, 1235-1257, 2002.

Riera

"An Improved Hybrid Model for the Generic Hoist Scheduling Problem", Annals of Operations Research, Vol. 115, 173-191, 2002.

Pfund

"Exploring the Boundaries Between Scheduling and Dispatching in High-Tech Manufacturing Environments", Proceedings of the 2002 Annual Meeting of the Western Decision Sciences Institute, Las Vegas, Nevada, April 2-5, pp. 726-731, 2002.

Kurtulus

"Using MRP Logic and Formulation to Solve Multi-Stage Reject Allowance Problems", Proceedings of the 2002 Annual Meeting of the Decision Sciences Institute, San Diego, California, November 23-26, pp. 2042-2047, 2002.

Adenso-Diaz

"Automatic Disassembly Plans: Application to the Continuous Process Industries", Journal of Manufacturing Systems, Vol. 21, No. 4, 276-286, 2002.

Pak

"Destructive Disassembly of Bolts and Screws by Impact Fracture", Journal of Manufacturing Systems, Vol. 21, No. 4, 316-324, 2002.

Takahashi

"Decentralized Control of Reactive Kanban System (in Japanese)", Journal of Japan Industrial Management Association, Vol. 53, No. 4, 302-310, 2002.

Doran

"Solving the Product Takeback Problem", Research Report, Computer Integrated Manufacturing Research Unit, National University of Ireland, Galway, Ireland, July 11, 2002.

Kuswanti

"An Engineering Approach to Plastic Recycling Based on Rheological Characterization", Journal of Industrial Ecology, Vol. 6, No. 3-4, 125-135, 2002.

Pak

Pak, K. G., "Destructive Disassembly of Bolts and Screws Using Impact", PhD Thesis, (Advisor: Dr. Raj S. Sodhi), Department of Mechanical Engineering, New Jersey Institute of Technology, New Jersey, May 2002.

Mathieux

Mathieux, F., "Contribution a L’Integration de la Valorisation en fin de vie des la Conception D’un Produit (in French)", PhD Thesis, (Advisors: Drs. D. Froelich and P. Moszkowicz), École Nationale Supérieure d'Arts et Métiers, Institut Conception, Mécanique et Environnement, Chambéry, December 2002.

Ferrao

"The Industrial Ecology of the Automobile: a Portuguese Perspective", International Journal of Ecology and Environmental Sciences, Vol. 28, No. 1, 27-34, 2002.

Mo

"Virtual Disassembly", International Journal of CAD/CAM, Vol. 2, No. 1, 29-37, 2002.

Duta

"Automated Disassembly: Main Stage in Manufactured Products Recycling", Proceedings of the 4th International Workshop on Computer Science and Information Technologies (CSIT'2002), Paper No. 133, Patras, Greece, September 18-20, 2002 (CD-ROM).

O’Shea

"Design for Environment in Conceptual Product Design - A Decision Model to Reflect Environmental Issues of All Life-Cycles Phases", Journal of Sustainable Product Design, Vol. 2, No. 1-2, 11-28, 2002.

Jain

"Queueing Modelling of Machining System with Balking, Reneging, Additional Repairmen and Two Modes of Failure", Journal of King Abdulaziz University: Engineering Sciences, Vol. 14, No. 2, 53-71, 2002.

Zuo

"A Novel Disassembly Tool with Screwnail Endeffectors", Journal of Intelligent Manufacturing, Vol. 13, No. 3, 157-163, 2002.

White

"Just-In-Time Manufacturing", in Innovations in Competitive Manufacturing, Edited by Paul M. Swamidass, American Management Association, New York, USA, Chapter 15, 167-176, ISBN: 0-8144-7140-4, 2002.

Klassen

"Environmental Issues and Competitive Manufacturing", in Innovations in Competitive Manufacturing, Edited by Paul M. Swamidass, American Management Association, New York, USA, Chapter 30, 373-381, ISBN: 0-8144-7140-4, 2002.

Paya

"Sistema Automático de Verificación de Tareas de Desensamblado (Automatic System to Verify Disassembly Tasks)", (in Spanish), Proceedings of the XXIII Jornadas de Automatica, September 9-11, Universidad de La Laguna, Spain, 2002.

Gonzalez

"A Fuzzy Logic Approach for the Impact Assessment in LCA", Resources, Conservation and Recycling, Vol. 37, No. 1, 61-79, 2002.

Puente-Mendez

Puente-Mendez, S. T., "Desensamblado Automático no Destructivo para la Reutilización de Componentes. Aplicación al Desensamblado de PC’s (in Spanish)", PhD Thesis, (Advisors: Drs. F. Torres Medina and R. Aracil Santonja), Universidad de Alicante, Alicante, Spain, 2002.

Hernandez

"A Method for Interactive Decision-Making in Collaborative, Distributed Engineering Design", International Journal of Agile Manufacturing Systems, Vol. 5, No. 2, 47-65, 2002.

French

French, M. L., "Closed-Loop Supply Chains in Process Industries: An Exploratory Study of Reuse Practices", PhD Thesis, (Advisor: Professor M. A. McKnew), Department of Management, Clemson University, 2002.

Coulon

Coulon, P.-E., "Generation of the Sequences of Assembly of a Product from its Modeling in CATIA and AutoCAD (in French)", Master's Thesis, (Advisor: Professor M. Trepanier), Ecole Polytechnique, Montreal (Canada), 2002.

Balasoiu

Balasoiu, B. A., "Nouvelle Methode de Desassemblage Virtuel pour la Generation de Gammes (in French)", Master's Thesis, (Advisor: Professor M. Balazinski), Ecole Polytechnique, Montreal (Canada), 2002.

Supsomboon

Supsomboon, S., "Optimization Model for Production and Delivery Planning in JIT-Kanban Supply Chain Systems", PhD Thesis, (Advisor: Professors Z. B. Zabinsky and B. M. Beamon), Department of Industrial Engineering, University of Washington, 2002.

Ayyar

Ayyar, S. R. A., "Single and Multiple Server Queues with Vacations: Analysis and Algorithms", Master's Thesis, (Advisor: Dr. Xiuli Chao), Department of Industrial Engineering, North Carolina State University, Raleigh, North Carolina, 2002.

Werner

Werner, F., "Interdependencies between LC-Modelling and the Use of LCA in Product Design-Related Decision Situations", PhD Thesis, (Advisors: Drs. R. W. Scholz and S. Schaltegger), Swiss Federal Institute of Technology, Zurich, 2002.

Heisig

"Planning Stability in Material Requirements Planning Systems", Lecture Notes in Economics and Mathematical Systems, Vol. 515, Berlin, Germany, ISBN: 3-540-43015-6, 2002.

Jin

Jin, K., "A Multiple Objective Decision Making Model for Materials Management of End-Of-Life Electronic Products", PhD Thesis, (Advisor: Professor H. C. Zhang), Department of Industrial Engineering, Texas Tech University, 2002.

Gamas Buentello

Gamas Buentello, E. J., "A Comparative Simulation Study of Manufacturing Resource Planning, Just-In-Time and Theory of Constraints in Vat Classified Flow Shops Facing Smooth and Lumpy Demand", PhD Thesis, (Advisors: Professors R. Bremer and P. Randolph), Department of Business Administration, Texas Tech University, 2002.

Bhootra

Bhootra, A., "A Disassembly Optimization Problem", Master's Thesis, (Advisor: Dr. S. C. Sarin), Department of Industrial and Systems Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, September 2002.

Gao

Gao, Z., "An Object-Oriented System Design for a Web-Based Electronic Product Evaluation and Recovery Management System", Master's Thesis, (Advisor: Professor H. C. Zhang), Department of Industrial Engineering, Texas Tech University, 2002.

Rahimifard

"A Methodology to Support the Implementation of Product Recovery", Design and Manufacture for Sustainable Development (Proceedings of the 1st International Conference on Design for Manufacture and Sustainable Development),B. Hon (Ed), Professional Engineering Publishing Ltd, Liverpool, UK, 2002, pp 145-152, ISBN 1-86058-396-2

Lifset

"Industrial Ecology: Goals and Definitions", in A Handbook of Industrial Ecology,Edited by Robert U. Ayres and Leslie W. Ayres, Edward Elgar Publishing, pp. 3-15, Chapter 1, ISBN: 978-1840645064, 2002.

Hendrickson

"Industrial Ecology and Green Design", in A Handbook of Industrial Ecology,Edited by Robert U. Ayres and Leslie W. Ayres, Edward Elgar Publishing, pp. 457-466, Chapter 36, ISBN: 978-1840645064, 2002.

Udomsawat

"A Multi-Kanban Mechanism for a Disassembly Line", Proceedings of the Fourth International Conference on Operations and Quantitative Management, Tainan, Taiwan, January 2-5, pp. 79-85, 2003.

Koh

"MRP-Controlled Manufacturing Environment Disturbed by Uncertainty", Robotics and Computer Integrated Manufacturing, Vol. 19, No. 1-2, 157-171, 2003.

Maria

"Linear Physical Programming for Production Planning Optimization", Engineering Optimization, Vol. 35, No. 1, 19-37, 2003.

Flowers

"Hazardous Waste Disposal: A Waste-Fuel Blending Approach", Technical Memorandum Number 757, Department of Operations, Weatherhead School of Management, Case Western Reserve University, 10900 Euclid Avenue, Cleveland, Ohio 44106-7235, January 2003.

Aksen

"The Single-Item Lot-Sizing Problem with Immediate Lost Sales", European Journal of Operational Research, Vol. 147, No. 3, 558-566, 2003.

Magazine

"Job Release Policy and Printed Circuit Board Assembly", IIE Transactions, Vol. 35, No. 4, 379-387, 2003.

Nakashima

"Performance Evaluation of a Supplier Management System with Stochastic Variability", International Journal of Manufacturing Technology and Management (IJMTM), Vol. 5, No. 1, 28-37, 2003.

Chae

"An Interpretation and Extensions of Duality Relations Among Queueing Systems (in Korean)", Journal of the Korean Operations Research and Management Science Society, Vol. 28, No. 1, 37-49, 2003.

Udomsawat

"A Multi-Kanban Model for Disassembly", Proceedings of the 2003 Northeast Decision Sciences Institute Conference, Providence, Rhode Island, pp. 169-171, March 27-29, 2003.

Tadevosyan

"Green Logistics in Closed Loop Supply Chain Networks", Proceedings of the 2003 Northeast Decision Sciences Institute Conference, Providence, Rhode Island, pp. 154-156, March 27-29, 2003.

McGovern

"Solving Disassembly Sequence Planning Problems Using Combinatorial Optimization", Proceedings of the 2003 Northeast Decision Sciences Institute Conference, Providence, Rhode Island, pp. 178-180, March 27-29, 2003.

Pochampally

"Identification of Potential Recovery Facilities for Strategic Planning of an Efficient Reverse Distribution Network", Proceedings of the 2003 Northeast Decision Sciences Institute Conference, Providence, Rhode Island, pp. 60-162, March 27-29, 2003.

Jarupan

"Simulation Based Approach For Return Packaging Systems", Proceedings of the 2003 Northeast Decision Sciences Institute Conference, Providence, Rhode Island, pp. 175-177, March 27-29, 2003.

Nakashima

"Performance Evaluation of a Product Recovery System", Proceedings of the 2003 Northeast Decision Sciences Institute Conference, Providence, Rhode Island, pp. 72-174, March 27-29, 2003.

Hui

"Hierarchical Environmental Impact Evaluation of a Process in Printed Circuit Board Manufacturing", International Journal of Production Research, Vol. 41, No. 6, 1149-1165, 2003.

Dong

"A Review of Current Research on Disassembly Sequence Generation and Computer Aided Design for Disassembly", Journal of Engineering Manufacture, Vol. 217, No. B3, 299-312, 2003.

Boon

"End-of-Life Infrastructure Economics for "Clean Vehicles" in the United States", Journal of Industrial Ecology, Vol. 7, No. 1, 25-45, 2003.

Wanyama

"Life-Cycle Engineering: Issues, Tools and Research", International Journal of Computer Integrated Manufacturing, Vol. 16, No. 4-5, 307-316, 2003.

Pochampally

"A Multi-Phase Mathematical Programming Approach to Strategic Planning of an Efficient Reverse Supply Chain Network", Proceedings of the 2003 IEEE International Symposium on Electronics and the Environment, Boston, Massachusetts, pp. 72-78, May 19-21, 2003.

Gao

"Disassembly AND/OR Graph Model for ‘Disassembly for Recycling’", Proceedings of the 2003 IEEE International Symposium on Electronics and the Environment, Boston, Massachusetts, pp. 54-59, May 19-21, 2003.

Das

"DISX: A Procedure for the Automated Generation of Disassembly Process Plans", Proceedings of the 2003 IEEE International Symposium on Electronics and the Environment, Boston, Massachusetts, pp. 60-65, May 19-21, 2003.

Qian

"Design for Environment: An Environmental Analysis Model for the Modular Design of Products", Proceedings of the 2003 IEEE International Symposium on Electronics and the Environment, Boston, Massachusetts, pp. 114-119, May 19-21, 2003.

Rios

"A Symbolic Methodology to Improve Manual Disassembly Economics", Proceedings of the 2003 IEEE International Symposium on Electronics and the Environment, Boston, Massachusetts, pp. 341-346, May 19-21, 2003.

Mohebbi

"Material Planning in a Capacitated Assemble-to-Order Environment with Component Commonality", Proceedings of the 2003 Institute of Industrial Engineering Research Conference, (CD-ROM), Portland, Oregon, May 18-21, 2003.

Aksoy

Aksoy, K., "Buffer Utilization and Performance Analysis in Remanufacturing Systems", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University, May 2003.

Cui

"Mechanical Recycling of Waste Electric and Electronic Equipment: A Review", Journal of Hazardous Materials, Vol. 99, No. 3, 243-263, 2003.

Wilhelm

"Circuit Card Assembly on Tandem Turret-Type Placement Machines", IIE Transactions, Vol. 35, No. 7, 627-645, 2003.

Spengler

"Management of Material Flows in Closed-Loop Supply Chains", Proceedings of 36th Annual Hawaii International Conference on System Sciences (HICSS'03), (CD-ROM), Big Island, Hawaii, January 6-9, 2003.

Horowitz

"Memory for Rejected Distractors in Visual Search?", Visual Cognition, Vol. 10, No. 3, 257-298, 2003.

Ho

"Component Scheduling for Chip Shooter Machines: A Hybrid Genetic Algorithm Approach", Computers and Operations Research, Vol. 30, No. 14, 2175-2189, 2003.

Kungas

"Linear Logic for Domain-Independent AI Planning", Proceedings of Doctoral Consortium at 13th International Conference on Automated Planning and Scheduling (ICAPS 2003), Trento, Italy, June 9-13, 2003.

Contreras

"Application of Ergonomics in Manual Disassembly Tasks", Proceedings of the Fifth International Congress of Ergonomics, Ciudad Juarez-Chihuahua, Mexico, May 1-3, 2003.

de Brito

"A Framework for Reverse Logistics", Research Report, ERIM Report Series on Research in Management No. ERS-2003-045-LIS, Erasmus Research Institute of Management, Erasmus Universiteit Rotterdam, The Netherlands, April 2003.

Rollins

"Modelling the Changing Apparel Supply Chain", International Journal of Clothing Science and Technology, Vol. 15, No. 2, 140-156, 2003.

Lambert

"Optimum Disassembly Sequence with Sequence-Dependent Disassembly Costs", Proceedings of the 5th IEEE International Symposium on Assembly and Task Planning (ISATP2003), Besancon, France, July 9-11, 2003.

Rosell

"Robot Tasks Sequence Planning using Petri Nets", Proceedings of the 5th IEEE International Symposium on Assembly and Task Planning (ISATP2003), Besancon, France, pp. 24-29, July 9-11, 2003.

Delamare

"Étude des grands systèmes symétriques stochastiques par réseaux bien formés décomposables (in French)", 8th Workshop on Performance Evaluation, Rheims, France, May 12-16, 2003.

Melissen

"Designing Collection Rate Enhancing Measures for ‘Small’ Consumer Electronics", PhD Thesis, (Advisors: Drs. A. C. Brombacher, G. H. J. Keijzers and A. J. de Ron), Department of Technology Management, Eindhoven: Technische Universiteit Eindhoven, February 2003.

Ellis

"An Approach for Grouping Circuit Cards Into Families to Minimize Assembly Time on a Placement Machine", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 26, No. 1, 22-30, 2003.

Leung

"Optimal Cycle Scheduling for Printed Circuit Board Production Lines with Multiple Hoists and General Processing Sequence", IEEE Transactions on Robotics and Automation, Vol. 19, No. 3, 480-484, 2003.

Scharnhorst

"Complex Networks and the Web: Insights From Nonlinear Physics", Journal of Computer-Mediated Communication, Vol. 8, No. 4, 2003.

Wang

"Optimal Batching and Shipment Control in a Multi-Stage Supply Chain System", Proceedings of the 2003 Institute of Industrial Engineering Research Conference, Portland, Oregon, May 18-21, 2003 (CD-ROM).

Spengler

"Integrated Planning of Acquisition, Disassembly and Bulk Recycling: A Case Study on Electronic Scrap Recovery", OR Spectrum, Vol. 25, No. 3, 413-442, 2003.

Shahabudeen

"Design of a Two-Card Dynamic Kanban System Using a Simulated Annealing Algorithm", International Journal of Advanced Manufacturing Technology, Vol. 21, No. 10, 754-759, 2003.

Inderfurth

"Production Planning and Control of Closed-Loop Supply Chains", in Business Aspects of Closed-Loop Supply Chains, Edited by V. D. R. Guide, Jr. and L. N. Van Wassenhove, pp. 149-174, Carnegie Bosch Institute, Pittsburgh, Pennsylvania, ISBN: 0-88748-402-6, 2003.

Pochampally

"Evaluation of Manufacturing Companies with Respect to Socio-Economic Criteria: A Fuzzy TOPSIS Approach", Proceedings of the 2003 International Conference on CAD/CAM, Robotics and Autonomous Factories (INCARF 2003), New Delhi, India, August 11-13, 2003 (CD-ROM).

Desai

"Evaluation of Disassemblability to Enable Design for Disassembly in Mass Production", International Journal of Industrial Ergonomics, Vol. 32, No. 4, 265-281, 2003.

Gao

Gao, M., "Optimal and Intelligent Decision Making in Sustainable Development of Electronic Products", PhD Thesis, (Advisors: Drs. M. C. Zhou and R. Caudill), Department of Electrical and Computer Engineering, New Jersey Institute of Technology, New Jersey, August 2003.

Keuthen

Keuthen, R., "Heuristic Approaches for Routing Optimsation", PhD Thesis, (Advisors: Drs. E. K. Burke and P. Cowling), University of Nottingham, Nottingham, U.K., January 2003.

Koh

"A Holistic Approach to Diagnose Uncertainty in ERP-Controlled Manufacturing Shop Floor", Production Planning and Control, Vol. 14, No. 3, 273-289, 2003.

Langella

"Heuristics for Demand-Driven Disassembly Planning", Research Report, Faculty of Economics and Management, Otto-von-Guericke University, Magdeburg, Germany, 2003.

Inderfurth

"An Approach for Solving Disassemble-To-Order Problems Under Stochastic Yields", Proceedings of Logistics Management 2003, Braunschweig, Germany, September 24-26, 2003.

Mohanty

"Expert Enhanced Coloured Fuzzy Petri Net Models of Traditional, Flexible and Reconfigurable Kanban Systems", Production Planning and Control, Vol. 14, No. 5, 459-477, 2003.

Okumura

"Environmental Effects of Physical Life Span of a Reusable Unit Following Functional and Physical Failures in a Remanufacturing System", International Journal of Production Research, Vol. 41, No. 16, 3667-3687, 2003.

Lambert

"Disassembly Sequencing: A Survey", International Journal of Production Research, Vol. 41, No. 16, 3721-3759, 2003.

Singh

"Modelling and Planning of the Disassembly Processes Using an Enhanced Expert Petri Net", International Journal of Production Research, Vol. 41, No. 16, 3761-3792, 2003.

Lee

"A Dispatching Rule-Based Approach to Production Scheduling in a printed Circuit Board Manufacturing System", Journal of Operational Research Society, Vol. 54, No. 10, 1038-1049, 2003.

McGovern

"Greedy Algorithm for Disassembly Line Scheduling", Proceedings of the 2003 IEEE International Conference on Systems, Man, and Cybernetics, Washington, DC, pp. 1737-1744, October 2003.

Morandin Jr.

"Virtual Petri Nets as a Modular Modeling Method for Planning and Control Tasks of FMS", Proceedings of the 2003 IEEE International Conference on Systems, Man, and Cybernetics, Washington, DC, pp. 1521-1527, October 2003.

Desai

"Review of Literature on Disassembly Algorithms and Design for Disassembly Guidelines for Product Design", International Journal of Industrial Engineering, Vol. 10, No. 3, 244-255, 2003.

Zha

"Assembly Process Sequence Planning for Step Based Mechanical Products: An Integrated Model and System Implementation", International Journal of Industrial Engineering, Vol. 10, No. 3, 279-288, 2003.

Stuart

"New Metrics and Scheduling Rules for Disassembly and Bulk Recycling", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 26, No. 2, 133-140, 2003.

Kim

"Disassembly Scheduling with Multiple Product Types", CIRP Annals, Vol. 52, No. 1, 2003.

Gonzalez-Torre

"Optimizing Decision Making at the End Of Life of a Product", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 40-50, October 29-30, 2003.

Banda

"Disassembly Analysis Before Assembly", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 51-58, October 29-30, 2003.

Altekin

"Disassembly Line Balancing with Limited Supply and Subassembly Availability", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 59-70, October 29-30, 2003.

Tate

"Innovative Practices in Environmental Management", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 155-164, October 29-30, 2003.

Tuzkaya

"Solving a Layout Design Problem by Analytic Hierarchy Process (AHP) and Data Envelopment Analysis (DEA) Approach", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 232-239, October 29-30, 2003.

Kongar

"The Use of Data Envelopment Analysis for Product Recovery", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 219-231, October 29-30, 2003.

Udomsawat

"Multi-Kanban Model for Disassembly Line with Demand Fluctuation", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 85-93, October 29-30, 2003.

Nakashima

"Optimal Control of a Remanufacturing System with Consideration for Product Life Cycle", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 15-19, October 29-30, 2003.

Pochampally

"Evaluation of Production Facilities in a Closed-Loop Supply Chain: A Fuzzy TOPSIS Approach", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 125-138, October 29-30, 2003.

Pochampally

"A Fuzzy Cost-Benefit Function to Select Economical Products for Processing in a Closed-Loop Supply Chain", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 20-29, October 29-30, 2003.

Pochampally

"Identification of Potential Recovery Facilities for Designing a Reverse Supply Chain Network Using Physical Programming", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 139-146, October 29-30, 2003.

Pochampally

"Second-Hand Market as an Alternative in Reverse Logistics", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 30-39, October 29-30, 2003.

Jarupan

"Simulation Study on Vehicle Dispatching Strategies for Returnable Transport Packaging", Proceedings of the SPIE International Conference on Intelligent Manufacturing, Providence, Rhode Island, pp. 161-169, October, 2003.

Jarupan

"Evaluation of Trade-offs in Costs and Environmental Impacts for Returnable Packaging Implementation", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 6-14, October 29-30, 2003.

McGovern

"2-Opt Heuristic for the Disassembly Line Balancing Problem", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, pp. 71-84, October 29-30, 2003.

Vadde

"Multi-Scale Registration Algorithm for Alignment of Meshes", Proceedings of the SPIE International Conference on Intelligent Manufacturing, Providence, Rhode Island, pp. 113-119, October, 2003.

Addouche

"On Disassembly Workshop Model Integration for Disassembly Planning", Proceedings of the 5th IEEE International Symposium on Assembly and Task Planning (ISATP2003), Besancon, France, pp. 157-162, July 9-11, 2003.

Duta

"A Method for Dealing with Multi-Objective Optimization Problem of Disassembly Processes", Proceedings of the 5th IEEE International Symposium on Assembly and Task Planning (ISATP2003), Besancon, France, pp. 163-168, July 9-11, 2003.

Lai

"Integrated Assembly Plan Generation System for Grouped Product Families", International Journal of Production Research, Vol. 41, No. 17, 4041-4061, 2003.

Takahashi

"Comparing Reactive Kanban Systems", International Journal of Production Research, Vol. 41, No. 18, 4317-4337, 2003.

Nakashima

"Optimal Control of a Remanufacturing System", Proceedings of the 17th International Conference on Production Research (ICPR-17), Blacksburg, Virginia, August 3-7, 2003 (CD-ROM).

Mejia

"Petri Net Models and Heuristic Search for Scheduling of Manufacturing Systems: A Comparative Study", Proceedings of the 17th International Conference on Production Research (ICPR-17), Blacksburg, Virginia, August 3-7, 2003 (CD-ROM).

Quesada

"Mapping Research Areas Within Reverse Logistics by Means of Focus Group Technique", Proceedings of the 17th International Conference on Production Research (ICPR-17), Blacksburg, Virginia, August 3-7, 2003 (CD-ROM).

Koh

"How Uncertainty Disturbs SME Manufacturers?", Proceedings of the 17th International Conference on Production Research (ICPR-17), Blacksburg, Virginia, August 3-7, 2003 (CD-ROM).

Johnson

"Incorporating Strategic and Environmental Objectives into the Equipment Justification Process", Environmental Quality Management, Vol. 13, No. 1, 25-41, 2003.

Hula

"Multi-Criteria Decision-Making for Optimization of Product Disassembly under Multiple Situations", Environmental Science and Technology, Vol. 37, No. 23, 5303-5313, 2003.

Rios

"A Symbolic Methodology To Improve Disassembly Process Design", Environmental Science and Technology, Vol. 37, No. 23, 5417-5423, 2003.

Rios

"Plastics Disassembly versus Bulk Recycling: Engineering Design for End-of-Life Electronics Resource Recovery", Environmental Science and Technology, Vol. 37, No. 23, 5463-5470, 2003.

Kang

"Disassembly Sequencing with Imprecise Data: A Case Study", International Journal of Industrial Engineering, Vol. 10, No. 4, 407-412, 2003.

Sun

"Design for Environment: Methodologies, Tools, and Implementation", Journal of Integrated Design and Process Science, Vol. 7, No. 1, 59-75, 2003.

Flowers

"Hazardous Waste Disposal: A Waste-Fuel Blending Approach", Production and Operations Management, Vol. 12, No. 3, 307-319, 2003.

Ketzenberg

"Mixed Assembly and Disassembly Operations for Remanufacturing", Production and Operations Management, Vol. 12, No. 3, 320-335, 2003.

Ke

"The Analysis of a General Input Queue with N Policy and Exponential Vacations", Queueing Systems, Vol. 45, No. 2, 135-160, 2003.

Campbell

"Design Evaluation Method for the Disassembly of Electronic Equipment", International Conference on Engineering Design (ICED03), Stockholm, August 19-21, 2003.

Fernandez

"The Role of Reverse Logistics in Repair Customer Support: Two Companies under Test", Proceedings of the Congress on Quality Management and Organizational Development (QMOD), Paris, France, October, 2003 (CD-ROM).

Li

"Polychromatic Sets and its Application in Simulating Complex Objects and Systems", Computers and Operations Research, Vol. 30, No. 6, 851-860, 2003.

Tsoulfas

"Analysis of Environmental Parameters in Closed-Loop Supply Chain Design", Proceedings of the 8th Conference on Environmental Science and Technology (CEST2003), Lemnos Island, Greece, pp. 840-847, September 8-10, 2003.

Wang

"Intelligent Selective Disassembly Using the Ant Colony Algorithm", Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 17, No. 4, 325-333, 2003.

Choi

"Decision Support Tools for Environmental Product and Process Management: Survey and Needs", Environmental Informatics Archives, Vol. 1, No. 1, 24-37, 2003.

Duta

"Determination of the Optimal Disassembly Sequence Using Decision Trees", Proceedings of the International IFAC Conference on Intelligent Assembly and Disassembly (IAD2003), Bucarest, Romania, pp. 43-48, October 9-11, 2003.

Duta

"Using Decision Tools in the Industrial Process Control", Proceedings of the International Symposium on Electrical Engineering, Targoviste Romania, November 3-4, 2003 (CD-ROM).

Smink

"Ecological Modernisation Theory and the Changing Dynamics of the European Automotive Industry: The Case of Dutch End-Of-Life Vehicle Policies", International Journal of Environment and Sustainable Development, Vol. 2, No. 3, 284-304, 2003.

Seidl

"Fault-Tolerant and Maximally-Permissive FMS Controllers Rght Out of the Box - An Automatic Design Approach", Robotics and Computer Integrated Manufacturing, Vol. 19, No. 5, 431-438, 2003.

Chen

"A Membership Function Approach to Fuzzy Queues with Finite Capacity", Proceedings of the 2003 International Conference on Technology and Management, Taipei, Taiwan, pp. 218-222, October 2003.

Galantucci

"Application of Reverse Engineering to End-Of-Life Cycle Product Disassembly", 18th International Conference on Computer-Aided Production Engineering, Edited by J. McGeough, Professional Engineering Publishing Limited, London, U.K., 13-22, ISBN: 1-86058-404-7, 2003.

Addouche

Addouche, S., "Contribution à une Démarche de Conception Optimisée des Processus de Désassemblage (in French)", PhD Thesis, (Advisors: Drs. J.M. Henrioud and C. Perrard), l’Université de Franche-Comté, Besancon, France, December 2003.

Arimitsu

"A Trial Proposal Model for a Remanufacturing System", Journal of Japan Industrial Management Association, Vol. 54, No. 1, 19-25, 2003.

Mukherjee

"Reverse Logistics for Product Recovery – Issues and Models", Vision: The Journal of Business Perspective, Vol. 7, 141–149, 2003.

Blanco

"Aspectos técnicos y económicos de la recuperación de ordenadores y otros residuos electrónicos: especial referencia al caso europeo y español (in Spanish)", Residuos, No. 74, 42-52, 2003.

Gaudette

Gaudette, K. J., "Inventory Planning for Remanufacturing", PhD Thesis, (Advisor: Professor V. Mabert), Kelley School of Business, Indiana University, 2003.

Gonzalez

"Ajuste Dinamico de Tarjetas en un Sistema CONWIP (in Spanish)", V Congreso de Ingenieria de Organizacion, Valladolid, September 4-5, 2003.

Lambert

"Logistique Inverse: Revue de Litterature (in French)", V GERAD Report No. G-2003-61, Ecole Polytechnique de Montreal, Montreal, Canada, 2003.

Mangione

Mangione, F., "Ordonnancement des Ateliers de Traitement de Surface Pour une Production Cyclique et Mono-Produit (in French)", PhD Thesis, (Advisors: Dr. Y. Frein and B. Penz), National Polytechnic Institute of Grenoble, France, 2003.

Addouche

"Integration of Reassembly Operations in Disassembly Processes Planning", Proceedings of the International IFAC Conference on Intelligent Assembly and Disassembly (IAD2003), Bucarest, Romania, pp. 37-42, October 9-11, 2003.

Gottberg

Gottberg, A., "Producer Responsibility for WEEE as a Driver of Ecodesign", Master's Thesis, (Advisor: Dr. Joe Morris), Cranfield University at Silsoe, 2003.

Nagrath

Nagrath, D., "Evolutionary Design, Multiobjective Optimization and Control of Chromatographic Processes", PhD Thesis, (Advisors: Drs. S. M. Cramer and B. W. Bequette), Department of Chemical Engineering, Rensselaer Polytechnic Institute, Troy, New York, 2003.

Jaya Sankar

"Triangular Permutation Scan Algorithm for Robot Tour Problem", Proceedings of the 13th Artificial Neural Networks in Engineering Conference (ANNIE 2003), St. Louis, Missouri, pp. 361-366, November 2-5, 2003.

Qian

Qian, X., "Environmental Analysis Model for Modular Design of Electromechanical Products", PhD Thesis, (Advisor: Professor H. C. Zhang), Department of Industrial Engineering, Texas Tech University, 2003.

Jiang

Jiang, Yun, "A Study on Cyclic Hoist Scheduling Problems", PhD Thesis, (Advisor: Dr. Jiyin Liu), Department of Industrial Engineering and Engineering Management, Hong Kong University of Science and Technology, Hong Kong, 2003.

Lima

"The Ergonomics Analysis Contribution for the Product Project Directed Towards Recycling (in Portuguese)", Revista Produção, Vol. 13, No. 2, 82-87, 2003.

Hormozi

"The Art and Science Of Remanufacturing: An In Depth Study", Proceedings of the 2003 Decision Sciences Institute Conference, Washington, DC, pp. 1-6, November 22-25, 2003.

Medhi

"Stochastic Models in Queueing Theory", Academic Press, ISBN: 0-12-487462-2, 2003.

Rubio Lacoba

Rubio Lacoba, S., "El Sistema de Logística Inversa en la Empresa: Análisis y Aplicaciones (Reverse Logistics System in Companies: Analysis and Applications) (in Spanish)", PhD Thesis, (Advisors: Drs. Tomas M. Banegil Palacios and Albert Corominas Subias), University of Extremadura, Spain, 2003.

Selvaraj

"Simulation of Machine Breakdowns in a Pull Production System Operated by Various Control Mechanisms", Proceedings of the IASTED International Conference on Modelling, Simulation and Optimization, Banff, Canada, July 2-4, 2003.

Yusof

Yusof, Y. B., "Disassemblability Evaluation Method (DEM) for Green Product", Master's Thesis, (Advisor: Dr. A. H. A. Razak), Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 2003.

Sorensen

"A Petri Net Model of a Continuous Flow Transfer Line with Unreliable Machines", European Journal of Operational Research, Vol. 152, No. 1, 248-262, 2004.

Spicer

"Third Party Demanufacturing as a Solution for Extended Producer Responsibility", Journal of Cleaner Production, Vol. 12, No. 1, 37-45, 2004.

Bohez

"A New Generic Timed Petri Net Model for Design and Performance Analysis of a Dual Kanban FMS", International Journal of Production Research, Vol. 42, No. 4, 719-740, 2004.

Jain

"N -Policy for a Machine Repair System with Spares and Reneging", Applied Mathematical Modelling, Vol. 28, No. 6, 513-531, 2004.

Murthy

"Product Warranty Logistics: Issues and Challenges", European Journal of Operational Research, Vol. 156, No. 1, 110-126, 2004.

Chen

"Parametric Nonlinear Programming for Analyzing Fuzzy Queues with Finite Capacity", European Journal of Operational Research, Vol. 157, No. 2, 429-438, 2004.

Aras

"The Effect of Categorizing Returned Products in Remanufacturing", IIE Transactions, Vol. 36, No. 4, 319-331, 2004.

Torres

"Automatic PC disassembly for Component Recovery", International Journal of Advanced Manufacturing Technology, Vol. 23, No. 1-2, 39-46, 2004.

Flapper

"Logistic Planning of Rework with Deteriorating Work-In-Process", International Journal of Production Economics, Vol. 88, No. 1, 51-59, 2004.

Dotoli

"Coloured Timed Petri Net Model for Real-Time Control of Automated Guided Vehicle Systems", International Journal of Production Research, Vol. 42, No. 9, 1787-1814, 2004.

Sodhi

"Evaluating the Unfastening Effort in Design for Disassembly and Serviceability", Journal of Engineering Design, Vol. 15, No. 1, 69-90, 2004.

Koh

"Modelling Uncertatinty Under a Multi-Echelon ERP-Controlled Manufacturing System", Journal of Manufacturing Technology Management, Vol. 15, No. 3, 239-253, 2004.

Koh

"MRP-Controlled Batch-Manufacturing Environment Under Uncertainty", Journal of Operational Research Society, Vol. 55, No. 3, 219-232, 2004.

Lee

"A Two-Stage Heuristic for Disassembly Scheduling with Assembly Product Structure", Journal of Operational Research Society, Vol. 55, No. 3, 287-297, 2004.

Wang

"A Single-Stage Supply Chain System Controlled by Kanban Under Just-In-Time Philosophy", Journal of Operational Research Society, Vol. 55, No. 5, 485-494, 2004.

Agbejule

"Approaches to Environmental Value Analysis of Products, Processes, and Services", Management of Environmental Quality, Vol. 15, No. 2, 111-130, 2004.

Seitz

"Meeting the Closed-Loop Challenge: The Case of Remanufacturing", California Management Review, Vol. 46, No. 2, 74-89, 2004.

Fernandez

"Tracking the Bond Between Environmental Issues and Reverse Logistics: Is it so Strong?", Proceedings of the Congress on Responsive Supply Chain and Organizational Competitiveness - A Technology Watch (RSC-2004), Coimbatore, India, January, 2004 (CD-ROM).

McGovern

"Metaheuristic Technique for the Disassembly Line Balancing Problem", Proceedings of the 2004 Northeast Decision Sciences Institute Conference, Atlantic City, New Jersey, pp. 223-225, March 24-26, 2004.

Pochampally

"Evaluation of Recycling Programs with respect to Drivers of Public Participation: A Fuzzy TOPSIS Approach", Proceedings of the 2004 Northeast Decision Sciences Institute Conference, Atlantic City, New Jersey, pp. 226-228, March 24-26, 2004.

Pochampally

"A Neural Network Approach to Predict the Success of a Collection Center in a Reverse Supply Chain", Proceedings of the 2004 Northeast Decision Sciences Institute Conference, Atlantic City, New Jersey, pp. 229-231, March 24-26, 2004.

Udomsawat

"Determination of Base Kanban Level for Multi-Kanban Mechanism in a Disassembly Line", Proceedings of the 2004 Northeast Decision Sciences Institute Conference, Atlantic City, New Jersey, pp. 232-234, March 24-26, 2004.

Gupta

"Multi-Objective Optimization in Disassembly Sequencing Problems", Proceedings of the 2004 POMS-Cancun Meeting, Cancun, Mexico, April 30-May 3, 2004 (CD-ROM).

Gupta

"Crucial Issues in Closed-Loop Supply Chain Design", Proceedings of the 2004 POMS-Cancun Meeting, Cancun, Mexico, April 30-May 3, 2004 (CD-ROM).

Gupta

"Multi-Kanban Model for Multi-Product Disassembly with Multiple Demands", Proceedings of the 2004 POMS-Cancun Meeting, Cancun, Mexico, April 30-May 3, 2004 (CD-ROM).

Seitz

"The Impact of Product Variety on Closed-Loop Supply Chains: An Automotive Perspective", Proceedings of the 2004 POMS-Cancun Meeting, Cancun, Mexico, April 30-May 3, 2004 (CD-ROM).

Pochampally

"A Business-Mapping Approach to Multi-Criteria Group Selection of Collection Centers and Recovery Facilities", Proceedings of the 2004 IEEE International Symposium on Electronics and the Environment, Phoenix, Arizona, pp. 249-254, May 10-13, 2004.

Pochampally

"Efficient Design and Effective Marketing of a Reverse Supply Chain: A Fuzzy Logic Approach", Proceedings of the 2004 IEEE International Symposium on Electronics and the Environment, Phoenix, Arizona, pp. 321-326, May 10-13, 2004.

Bhuie

"Environmental and Economic Trade-offs in Consumer Electronic Products Recycling: A Case Study of Cell Phones and Computers", Proceedings of the 2004 IEEE International Symposium on Electronics and the Environment, Phoenix, Arizona, pp. 74-79, May 10-13, 2004.

McGovern

"Demanufacturing Strategy Based Upon Metaheuristics", Proceedings of the 2004 Institute of Industrial Engineering Research Conference, Houston, Texas, May 15-19, 2004 (CD-ROM).

Beamon

"Supply-Chain Network Configuration for Product Recovery", Production Planning and Control, Vol. 15, No. 3, 270-281, 2004.

Koh

"Development and Implementation of a Generic Order Release Scheme for Modelling MRP-Controlled Finite-Capacitated Manufacturing Environments", International Journal of Computer Integrated Manufacturing, Vol. 17, No. 6, 561-576, 2004.

Willems

"End-Of-Life Strategy Selection: a Linear Programming Approach to Manage Innovations in Product Design", Proceedings of the 11th CIRP Life Cycle Engineering Seminar, Belgrado, Serbia & Montenegro, June 20-22, 2004.

Tseng

"Connector-Based Approach to Assembly Planning Using a Genetic Algorithm", International Journal of Production Research, Vol. 42, No. 11, 2243-2261, 2004.

Sorensen

"Automatic Petri Net Simulation Model Generation for a Continuous Flow Transfer Line with Unreliable Machines", Quality and Reliability Engineering International, Vol. 20, No. 4, 343-362, 2004.

Pochampally

Pochampally, K. K., "Crucial Issues in Strategic Planning of Reverse and Closed-loop Supply Chains", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical and Industrial Engineering, Northeastern University, September 2004.

Rosell

"Assembly and Task Planning Using Petri Nets: A Survey", Journal of Engineering Manufacture, Vol. 218, No. B8, 987-994, 2004.

Ben-Arieh

"Analysis of Assembly Operations’ Dificulty Using Enhanced Expert High-Level Colored Fuzzy Petri Net Model", Robotics and Computer Integrated Manufacturing, Vol. 20, No. 5, 385-403, 2004.

Freiheit

"Productivity of Paced Parallel-Serial Manufacturing Lines With and Without Crossover", Journal of Manufacturing Science and Engineering, Vol. 126, No. 2, 361-367, 2004.

Nakashima

"Optimal Control of a Remanufacturing System", International Journal of Production Research, Vol. 42, No. 17, 3619-3625, 2004.

Pomares

"Virtual Disassembly of Products Based on Geometric Models", Computers in Industry, Vol. 55, No. 1, 1-14, 2004.

Inderfurth

"Optimal Policies in Hybrid Manufacturing/Remanufacturing Systems with Product Substitution", International Journal of Production Economics, Vol. 90, No. 3, 325-343, 2004.

Ould-Louly

"The MPS Parameterization Under Lead Time Uncertainty", International Journal of Production Economics, Vol. 90, No. 3, 369-376, 2004.

Shimizu

"Meta-Heuristic Approach for Supporting Design-for-Disassembly Towards Efficient Material Utilization", Proceedings of the 14th European Symposium on Computer Aided Process Engineering (ESCAPE-14), Lisbon, Portugal, May 16-19, 2004.

Ozbayrak

"How Successfully Does JIT Handle Machine Breakdowns in an Automated Manufacturing System?", Journal of Manufacturing Technology Managment, Vol. 15, No. 6, 479-494, 2004.

Gao

"Intelligent Decision Making in Disassembly Process Based on Fuzzy Reasoning Petri Nets", IEEE Transactions on Systems, Man and Cybernetics-Part B: Cybernetics, Vol. 34, No. 5, 2029-2034, 2004.

Rahimifard

"A Web-Based Information System to Support End-Of-Life Product Recovery", Journal of Engineering Manufacture, Vol. 218, No. B9, 1047-1057, 2004.

Takahashi

"A System for Monitoring and Supervising Reconfigurable Manufacturing Systems", Proceedings of the VIIth International Conference on Monitoring and Automatic Supervision in Manufacturing (AC'04), Zakopane, Poland, August 19-21, 2004.

Takahashi

"Reactive JIT Ordering System for Changes in the Mean and Variance of Demand", International Journal of Production Economics, Vol. 92, No. 2, 181-196, 2004.

Bandivadekar

"A Model for Material Flows and Economic Exchanges Within the U.S. Automotive Life Cycle Chain", Journal of Manufacturing Systems, Vol. 23, No. 1, 22-29, 2004.

Bangash

"Inventory Requirements Planning at Lucent Technologies", Interfaces, Vol. 34, No. 5, 342-352, 2004.

Lee

"Disassembly Scheduling: Integer Programming Models", Journal of Engineering Manufacture, Vol. 218, No. B10, 1357-1372, 2004.

Sinanoglu

"An Approach to Determine Geometric Feasibility to Assembly States by Intersection Matrices in Assembly Sequence Planning", Journal of Intelligent Manufacturing, Vol. 15, No. 4, 543-559, 2004.

Wu

"Multi-Item, Multi-Facility Supply Chain Planning: Models, Complexities, and Algorithms", Computational Optimization and Applications, Vol. 28, No. 3, 325-356, 2004.

Tseng

"A Replacement Consideration for the End-Of-Life Product in the Green Life Cycle Environment", International Journal of Advanced Manufacturing Technology, Vol. 24, No. 11-12, 925-931, 2004.

Diaz

"Logistica Inversa y Medio Ambiente: Aspectos Estrategicos y Operativos (Reverse Logistics and Environment: Strategic and Operational Aspects)", McGraw Hill, Madrid, Spain, 2004.

Pochampally

"A Linear Physical Programming Approach for Designing a Reverse Supply Chain", Proceedings of the Fifth International Conference on Operations and Quantitative Management, Seoul, South Korea, pp. 261-269, October 25-27, 2004.

McGovern

"Multi-Criteria Optimization for Non-Linear End of Lifecycle Models", Proceedings of the Sixth International Conference on EcoBalance, Tsubuka, Japan, pp. 201-204, October 25-27, 2004.

Gupta

"Disassembly Sequencing Problem: A Case Study of a Cell Phone", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 43-52, October 26-27, 2004.

McGovern

"Combinatorial Optimization Methods for Disassembly Line Balancing", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 53-66, October 26-27, 2004.

Udomsawat

"Multi-Kanban Mechanism for Personal Computer Disassembly", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 67-78, October 26-27, 2004.

Kizilkaya

"Modeling Operational Behavior of a Disassembly Line", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 79-93, October 26-27, 2004.

Pochampally

"Selection of Collection Centers and Recovery Facilities for Designing a Reverse Supply Chain", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 127-137, October 26-27, 2004.

Pochampally

"Beyond Sensor-Assisted Diagnosis of Used Products", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 138-146, October 26-27, 2004.

Imtanavanich

"Multi-Criteria Decision Making for Disassembly-To-Order System Under Stochastic Yields", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 147-162, October 26-27, 2004.

Zeid

"Product Take-Back: Sensors-Based Approach", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 200-206, October 26-27, 2004.

Jarupan

"Application of Combinatorial Approach in Packaging Material Selection", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 207-223, October 26-27, 2004.

Argon

"Modeling and Simulation of the Disassembly Operations and the Associated Communications Network", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 234-243, October 26-27, 2004.

Vadde

"Sensor-Embedded Computers for Better Life-Cycle Management", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 256-263, October 26-27, 2004.

Aksoy

"Remanufacturing Control in Multistage Systems with Stochastic Recovery Rates", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 264-273, October 26-27, 2004.

Lambert

"Exact Methods in Disassembly Sequencing as a Benchmark for Heuristic Algorithms", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 1-11, October 26-27, 2004.

Adenso-Diaz

"A Products Generator for Testing the Performance of Disassembly Procedures", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 12-22, October 26-27, 2004.

Tang

"Human Cognitive Analysis of Disassembly Planning Using Fuzzy Petri Net", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 23-30, October 26-27, 2004.

Haoues

"Disassembly for Valorization in Conceptual Design", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 31-42, October 26-27, 2004.

Tate

"The Impact of Supply Management on Environmental Performance Outcomes", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 94-105, October 26-27, 2004.

Kongar

"Performance Measurement for Supply Chain Management and Evaluation Criteria Determination for Reverse Supply Chain Management", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 106-117, October 26-27, 2004.

Korugan

"The Effect of Product Substitution at Non-Boundary Inventory States", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, Pennsylvania, pp. 224-233, October 26-27, 2004.

McGovern

"Multi-Criteria Ant System and Genetic Algorithm for End-of-Life Decision Making", Proceedings of the 2004 Decision Sciences Institute Conference, Boston, Massachusetts, pp. 6371-6376, November 20-23, 2004.

Pochampally

"Decision-Making Regarding the Futurity of an End-of-Use", Proceedings of the 2004 Decision Sciences Institute Conference, Boston, Massachusetts, pp. 6291-6296, November 20-23, 2004.

Udomsawat

"Push and Pull Control Systems in Disassembly Lines", Proceedings of the 2004 Decision Sciences Institute Conference, Boston, Massachusetts, pp. 7811-7816, November 20-23, 2004.

Payaro

"The Role of ICT in Reverse Logistics: A Hypothesis of RFID Implementation to Manage the Recovery Process", Proceedings of the 2004 eChallenges Conference, Vienna, Austria, October 27-29, 2004 (CD-ROM).

Leung

"Optimal Cyclic Multi-Hoist Scheduling: A Mixed Integer Programming Approach", Operations Research, Vol. 52, No. 6, 965-976, 2004.

Gupta

"SAFE-R: A New Model to Study the Evacuation Profile of a Building", Fire Safety Journal, Vol. 39, No. 7, 539-556, 2004.

Pati

"Cost Optimisation Model in Recycled Waste Reverse Logistics System", International Journal of Business Performance Management, Vol. 6, No. 3-4, 245-261, 2004.

Rios

"Scheduling Selective Disassembly for Plastics Recovery in an Electronics Recycling Center", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 27, No. 3, 187-197, 2004.

Schroter

"Designing Control Management Systems for Parts Recovery and Spare Parts Management in the Final Phase Within Closed-Loop Supply Chains", International Journal of Integrated Supply Management, Vol. 1, No. 2, 158-179, 2004.

Spengler

"Disassembly Planning in Closed-Loop Supply Chains: an ERP-Based Solution", International Journal of Integrated Supply Management, Vol. 1, No. 2, 139-157, 2004.

Tang

"Fuzzy-Petri-Net Based Disassembly Planning Considering Human Factors", Proceedings of the 2004 IEEE International Conference on Systems, Man and Cybernetics, The Hague, The Netherlands, October 10-13, pp. 4195-4200, 2004.

Kara

"Lifetime Prediction of Components for Reuse: An Overview", International Journal of Environmental Technology and Management, Vol. 4, No.4, 323-348, 2004.

Jain

"Bilevel Control of Degraded Machining System with Warm Standbys, Setup and Vacation", Applied Mathematical Modelling, Vol. 28, No. 12, 1015-1026, 2004.

Tseng

"A Connector-Based Approach to the Modular Formulation Problem for a Mechanical Product", International Journal of Advanced Manufacturing Technology, Vol. 24, No. 3-4, 161-171, 2004.

Kojima

"An Integrated Production Planning Problem for a Multi-Stage Production System Using KANBAN", Proceedings of The Fifth Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS'2004), Gold Coast, Australia, December 12-15, pp. 23.2.1-23.2.14, 2004.

Ciupek

Ciupek, M., "Beitrag Zur Simulationsgestutzten Planung von Demontagefabriken fur Electro- und Elektronikaltgerate", (in German), PhD Thesis, (Advisor: Dr. J. Kruger), Technischen Universitat Berlin, Berlin, Germany, September 2004.

Demopoulos

Demopoulos, P., "Recycling of WEEE – The challenge of the Disassembly", (in Greek), Mechanical Engineering Diploma Thesis, National Technical University of Athens, Greece, 2004.

Ranade

Ranade, V., "Reverse Logistics Issues in a Global Supply Chain Scenario", Master's Thesis, (Advisor: Dr. Ernest L. Hall), Department of Mechanical, Industrial and Nuclear Engineering, University of Cincinnati, 2004.

Khadilkar

Khadilkar, Y. S., "Reverse Supply Chain: Life Cycle Inventory Analysis", Master's Thesis, (Advisor: Dr. Richard Shell), Department of Mechanical, Industrial and Nuclear Engineering, University of Cincinnati, 2004.

Korevaar

Korevaar, G., "Sustainable Chemical Processes and Products", PhD Thesis, (Advisor: Prof. G. J. Harmsen), Technische Universiteit Delft, April 2004.

Masood

"Modeling Supervisory Control for Flexible Manufacturing System using Visual Object Net++", Proceedings of Modelling, Identification, and Control (MIC2004), Grindelwald, Switzerland, February 23-25, 2004.

O’Neil

"Green Chemistry in the Microelectronics Industry", Green Chemistry, Vol. 6, No. 8, 363-368, 2004.

Gattoufi

"Data Envelopment Analysis Literature: A Bibliography Update (1951–2001)", Socio-Economic Planning Sciences, Vol. 38, No. 2-3, 159-229, 2004.

Assavapokee

Assavapokee, T., "Semi-Continuous Robust Approach for Strategic Infrastructure Planning of Reverse Production Systems", PhD Thesis, (Advisors: Dr. J. C. Ammons and Dr. M. J. Realff), Georgia Institute of Technology, May 2004.

Dhimmar

Dhimmar, R., "Case Studies in Disassembly Process Planning", Master's Thesis, (Advisor: Dr. Sanchoy Das), New Jersey Institute of Technology, New Jersey, January 2004.

Wang

"Operation Models and Operation Management: A Framework for the De-Manufacturing System", Proceedings of the 2004 IEEE International Conference on Systems, Man, and Cybernetics, The Hague, The Netherlands, October 10-13, pp. 5085-5090, 2004.

Ijomah

"Remanufacturing: A Key Strategy for Sustainable Development", Proceedings of the Third International Conference on Design and Manufacture for Sustainable Development, Loughborough, September 1-2, 2004.

Parlikad

"Investigating the Role of Product Information in End-Of-Life Decision Making", Proceedings of the 11th IFAC Symposium on Information Control Problems in Manufacturing, Salvador, Brazil, pp. 413-418, April 5-7, 2004.

Jun

"Survey on the Bandit Problem with Switching Costs", De Economist, Vol. 152, No. 4, 513-541, 2004.

Jiao

"Process Variety Modeling for Process Configuration in Mass Customization: An Approach based on Object-Oriented Petri-Nets with Changeable Structures", International Journal of Flexible Manufacturing Systems, Vol. 16, No. 4, 335-361, 2004.

Subramanian

Subramanian, A., "Design for Disassembly - Quantitative Analysis Software: Based on the Parameters Affecting Disassembly", Master's Thesis, (Advisor: Dr. Anil Mital), Department of Mechanical, Industrial and Nuclear Engineering, University of Cincinnati, 2004.

Yoruk

Yoruk, S., "Some Strategic Problems in Remanufacturing and Refurbishing", Engineer's Thesis, (Advisor: Dr. Elif Akcali), University of Florida, 2004.

Nakashima

"Cost Analysis of a Remanufacturing System", Asia Pacific Management Review, Vol. 9, No. 4, 595-602, 2004.

Arimitsu

"Optimal Production Policy for a Remanufacturing System", Journal of Japan Industrial Management Association, Vol. 55, No. 3, 138-144, 2004.

Arimitsu

"Cost Factor Analysis in a Remanufacturing System", Journal of Japan Industrial Management Association – Office Automation, Vol. 25, No. 1, 88-94, 2004.

Seliger

"Process and Facility Planning for Mobile Phone Remanufacturing", CIRP Annals, Vol. 53, No. 1, 9-12, 2004.

Lai

"A Systematic Approach for Automatic Assembly Sequence Plan Generation", International Journal of Advanced Manufacturing Technology, Vol. 24, No. 9-10, 752-763, 2004.

Tang

"Simulation of a Disassembly-To-Order System", Proceedings of ASEE Annual Conference (Session 157), Salt Lake City, UT, June 20-23, 2004.

Fang

"Modeling the Logistics of Construction Materials through the Petri Net Techniques", Proceedings of ISOneWorld, LasVegas, Nevada, 2004.

Kusumastuti

"An Approach to Design Reverse Logistics Networks for Product Recovery", Proceedings of the IEEE International Engineering Management Conference, Singapore, October 18-21, pp. 1239-1243, 2004.

Lair

"The Effects of Transportation variance and Batch Sizes on the Performance of a Supply Chain", Proceedings of the IEEE International Engineering Management Conference, Singapore, October 18-21, pp. 1273-1277, 2004.

Gunter

Gunter, K. L., "Inventory and Value Management in Demanufacturing Facilities", PhD Thesis, (Advisor: Dr. John W. Sutherland), Department of Mechanical Engineering, Michigan Technological University, Houghton, Michigan, USA, 2004.

Franke

"Mobile Phone Remanufacturing Program Planning in Networks", Proceedings of the Global Conference on Sustainable Product Development and Life Cycle Engineering, Berlin, Germany, pp. 191-198, September 29-October 1, 2004.

Kaylani

Kaylani, H., "Optimal Design of Hybrid Push/Pull Manufacturing System of Fork/Join Queuing Network Topology Using Genetic Algorithm", PhD Thesis, (Advisor: Professor J. Cochran), Arizona State University, 2004.

Ho

Ho, W., "Component Sequencing and Feeder Arrangement for PCB Assembly Machines: Integration, Models, and Solutions", PhD Thesis, (Advisor: Professor P. Ji), Hong Kong Polytechnic University (People's Republic of China), 2004.

Cristina

Cristina, T., "Modele Matematice Pentru Programarea Productiei (in Romanian)", PhD Thesis, (Advisor: Dr. I. Odagescu), Academia de Studii Economice, Bucharest, Romania, 2004.

Seepersad

Seepersad, C. C., "A Robust Topological Preliminary Design Exploration Method with Materials Design Applications", PhD Thesis, (Advisors: Drs. F. Mistree, J. K. Allen and D. L. McDowell), Department of Mechanical Engineering, Georgia Institute of Technology, 2004.

Lopez Ontiveros

Lopez Ontiveros, M. A., "Integration des Contraintes de Remanufacturabilite en Conception de Produits (in French)", PhD Thesis, (Advisors: Dr. D. Brissaud and P. Zwolinski), National Polytechnic Institute of Grenoble, France, 2004.

Kohan

Kohan, N., "Measuring the Effect of Erratic Demand on Simulated Multi-Channel Manufacturing System Performance", Master's Thesis, (Advisors: Drs. D. Kulonda and C. Reilly), Department of Industrial Engineering and Management Systems, University of Central Florida, Orlando, Florida, 2004.

Teparakul

Teparakul, P. "Development of a Methodology to Evaluate Environmental Implecations of Lean Implementation", Master's Thesis, (Advisor: Dr. R. Sawhney), Department of Industrial Engineering, University of Tennessee, Knoxville, 2004.

Scott

Scott, W. D., "A Flexible Control System for Flexible Manufacturing Systems", PhD Thesis, (Advisors: Drs. J. S. Smith and C. O. Malave), Department of Industrilal Engineering, Texas A&M University, 2004.

de Brito

de Brito, M. P., "Managing Reverse Logistics or Reversing Logistics Management?", PhD Thesis, (Advisors: Drs. R. Dekker and M. B. M. de Koster), Erasmus University Rotterdam, 2004.

Sinha

Sinha, N., "Modeling for Effective Computer Support to MEMS Product Development", Master's Thesis, (Advisor: Dr. Chris W. J. Zhang), Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada, 2004.

Motevallian

"Representation of Precedence Constraints on Disassembly", Proceedings of the 34th International Conference on Computers and Industrial Engineering, San Francisco, November 14-16, pp. 590-595, 2004.

Sousa

Sousa, G. W. L., "Impact of Alternative Flow Control Policies on Value Stream Delivery Robustness Under Demand Instability: A System Dynamics Modeling and Simulation Approach", PhD Thesis, (Advisors: Dr. E. M. Van Aken and Dr. C. P. Koelling), Department of Industrial and Systems Engineering, Virginia Polytechnic Institute and State University, 2004.

Mazhar

"Reuse Potential of Used Parts in Consumer Products: Assessment with Weibull Analysis", International Journal of Production Engineering and Computers, Vol. 6, No.7, 113-118, 2004.

Mazhar

"Reuse Potential of Used Parts in Consumer Products: Assessment with Weibull Analysis", Proceedings of the 11th CIRP Life Cycle Engineering Seminar, Belgrado, Serbia & Montenegro, pp. 211-216, June 20-22, 2004.

Willems

"End-Of-Life Strategy Selection: a Linear Programming Approach to Manage Innovations in Product Design", International Journal of Production Engineering and Computers, Vol. 6, No.7, 45-53, 2004.

Sinha

Sinha, D., "The Management of Electronic Waste: A Comparitive Study on India and Switzerland", Master's Thesis, (Advisor: Prof. Dr. Markus Schwaninger), University of St.Gallen, St.Gallen, Switzerland, 2004.

Min

"Priority Assignment Procedure in Multi-Product Disassembly", Industrial Engineering and Management Systems, Vol. 3, No. 1, 12-21, 2004.

Sharma

"Performance Modelling of Machining System with Mixed Standby Components, Balking and Reneging", International Journal of Engineering, Vol. 17, No. 2A, 167-182, 2004.

de Brito

"Reversing Logistics Management", Medium Econometrische Toepassingen, Vol. 12, No. 2, 14-19, 2004.

Messac

"Optimization of Large-Scale Rigidified Inflatable Structures for Housing using Physical Programming", Structural and Multidisciplinary Optimization, Vol. 26, No. 1-2, 139-151, 2004.

Chae

"A Trial Solution Approach to the GI/M/1 Queue with N-Policy and Exponential Vacations", Journal of the Korean Statistical Society, Vol. 33, No. 3, 283-298, 2004.

Rao

Rao, N. U., "Economic Model for End of Life Management of Printed Circuit Boards", Master's Thesis, (Advisor: Professor H. C. Zhang), Department of Industrial Engineering, Texas Tech University, 2004.

Jennergren

Jennergren, L., "Flexible Assembly of Ready-to-Eat Meals", Licentiate Thesis, (Advisor: Professor Ivan Kalaykov), Orebro University, Orebro, Sweden, 2004.

Petitjean

"Petri Nets Simulation of Components Flows in Car Manufacturing", Proceedings of the 11th IFAC Symposium on Information Control Problems in Manufacturing, Salvador, Brazil, pp. 241-246, April 5-7, 2004.

Wang

"An Assembly-Type Supply Chain System Controlled by Kanbans Under a Just-In-Time Delivery Policy", European Journal of Operational Research, Vol. 162, No. 1, 153-172, 2005.

Jemai

"The Influence of Demand Variability on the Performance of a Make-To-Stock Queue", European Journal of Operational Research, Vol. 164, No. 1, 195-205, 2005.

Drekic

"A Preemptive Priority Queue with Balking", European Journal of Operational Research, Vol. 164, No. 2, 387-401, 2005.

Morandin Jr.

"Virtual Petri Nets as a Modular Modeling Method for Planning and Control Tasks of FMS", International Journal of Computer Integrated Manufacturing, Vol. 18, No. 2-3, 100-106, 2005.

Brander

"Cyclic Lot Scheduling with Sequence-Dependent Set-Ups: A Heuristic for Disassembly Processes", International Journal of Production Research, Vol. 43, No. 2, 295-310, 2005.

Sundin

"Making Functional Sales Environmentally and Economically Beneficial Through Product Remanufacturing", Journal of Cleaner Production, Vol. 13, No. 9, 913-925, 2005.

Aydin

"Effective Relational Database Approach to Represent Bills-Of-Materials", International Journal of Production Research, Vol. 43, No. 6, 1143-1170, 2005.

Ravi

"Analyzing Alternatives in Reverse Logistics for End-Of-Life Computers: ANP and Balanced Scorecard Approach", Computers and Industrial Engineering, Vol. 48, No. 2, 327-356, 2005.

Pochampally

"Strategic Planning of a Reverse Supply Chain Network", International Journal of Integrated Supply Management, Vol. 1, No. 4, 421-441, 2005.

Lambert

"Disassembly Modeling for Assembly, Maintenance, Reuse, and Recycling", CRC Press, Boca Raton, Florida, ISBN: 1-57444-334-8, 2005.

Aksoy

"Buffer Allocation Plan for a Remanufacturing Cell", Computers and Industrial Engineering, Vol. 48, No. 3, 657-677, 2005.

Linton

"A Framework for Identifying Differences and Similarities in the Managerial Competencies Associated with Different Modes of Product Life Extension", International Journal of Production Research, Vol. 43, No. 9, 1807-1829, 2005.

Gonzalez

"A Bill Of Materials-Based Approach for End-Of-Life Decision Making in Design for the Environment", International Journal of Production Research, Vol. 43, No. 10, 2071-2099, 2005.

McGovern

"Stochastic and Deterministic Combinatorial Optimization Solutions to an Electronic Product Disassembly Flow Shop", Proceedings of the 2005 Northeast Decision Sciences Institute Conference, Philadelphia, Pennsylvania, March 30-April 1, 2005 (CD-ROM).

Udomsawat

"Multi-Kanban in Disassembly Line with Component-Discriminating Demand", Proceedings of the 2005 Northeast Decision Sciences Institute Conference, Philadelphia, Pennsylvania, March 30-April 1, 2005 (CD-ROM).

Cui

"Dynamic Group Maintenance Policy in a Smart Sensor Integrated Flow-Line Manufacturing System", Proceedings of the 2005 Northeast Decision Sciences Institute Conference, Philadelphia, Pennsylvania, March 30-April 1, 2005 (CD-ROM).

Kizilkaya

"Sudden Material Handling System Breakdown in a Disassembly Line", Proceedings of the 2005 Northeast Decision Sciences Institute Conference, Philadelphia, Pennsylvania, March 30-April 1, 2005 (CD-ROM).

Imtanavanich

"Calculating Disassembly Yields in a Multi-Criteria Decision Making Environment for a Disassembly to Order System", Proceedings of the 2005 Northeast Decision Sciences Institute Conference, Philadelphia, Pennsylvania, March 30-April 1, 2005 (CD-ROM).

Argon

"Modeling of Disassembly and Associated Token Ring Network Operations", Proceedings of the 2005 Northeast Decision Sciences Institute Conference, Philadelphia, Pennsylvania, March 30-April 1, 2005 (CD-ROM).

Jarupan

"Prediction of Packaging Life-Cycle Design Performance", Proceedings of the 2005 Northeast Decision Sciences Institute Conference, Philadelphia, Pennsylvania, March 30-April 1, 2005 (CD-ROM).

Imtanavanich

"Multi-Criteria Decision Making Approach in Multiple Periods for a Disassembly-to-order System under Stochastic Yields", Proceedings of the 2005 POMS-Chicago Meeting, Chicago, Illinois, April 29-May 2, 2005 (CD-ROM).

Nukala

"Cost-Benefit Analysis of End-Of-Life PC’s", Proceedings of the 2005 POMS-Chicago Meeting, Chicago, Illinois, April 29-May 2, 2005 (CD-ROM).

Udomsawat

"Multi-Kanban Mechanism for Automobile Disassembly", Proceedings of the 2005 POMS-Chicago Meeting, Chicago, Illinois, April 29-May 2, 2005 (CD-ROM).

Argon

"Comparison of Performance Effect of CSMA/CD and Token Ring Networks on TV Disassembly Line", Proceedings of the 2005 POMS-Chicago Meeting, Chicago, Illinois, April 29-May 2, 2005 (CD-ROM).

Pochampally

"Multi-Phase Strategic Planning of a Reverse Supply Chain", Proceedings of the 2005 POMS-Chicago Meeting, Chicago, Illinois, April 29-May 2, 2005 (CD-ROM).

Udomsawat

"Disassembly of Sensor-Embedded Products using Disassembly Line with Pull Mechanism", Proceedings of the 2005 POMS-Chicago Meeting, Chicago, Illinois, April 29-May 2, 2005 (CD-ROM).

Chan

"Application of a Hybrid Case-Based Reasoning Approach in Electroplating Industry", Expert Systems with Applications, Vol. 29, No. 1, 121-130, 2005.

Kara

"A Selective Disassembly Methodology for End-Of-Life Products", Assembly Automation, Vol. 25, No. 2, 124-134, 2005.

Altekin

Altekin, F. T., "Profit Oriented Disassembly Line Balancing", PhD Thesis, (Advisors: Drs. L. Kandiller and N. E. Ozdemirel), Department of Industrial Engineering, Middle East Technical University, Ankara, Turkey, January 2005.

Tsai

"A Case-Based Reasoning System for PCB Defect Prediction", Expert Systems with Applications, Vol. 28, No. 4, 813-822, 2005.

Korenstein

"Managing Electronic Waste: The California Approach", Journal of Environmental Health, Vol. 67, No. 6, 36-37, 2005.

Hwarng

"Modelling a Complex Supply Chain: Understanding the Effect of Simplified Assumptions", International Journal of Production Research, Vol. 43, No. 13, 2829-2872, 2005.

Grabot

"Integration of Uncertain and Imprecise Orders in the MRP Method", Journal of Intelligent Manufacturing, Vol. 16, No. 2, 215-234, 2005.

Song

"Machine Learning Approach for Determining Feasible Plans of a Remanufacturing System", IEEE Transactions on Automation Science and Engineering, Vol. 2, No. 3, 262-275, 2005.

Gonzalez-Torre

Gonzalez-Torre, B. A., "Modelo Para La Determinacion De La Estrategia De Fin De Vida De Los Productos Dentro Del Enfoque Del “Diseno Para El Medio Ambiente”", (in Spanish), PhD Thesis, (Advisor: Dr. B. Adenso Díaz Fernández), Departamento de Administración de Empresas y Contabilidad, Universidad de Oviedo, Gijon, Spain, January 2005.

Bloemhof

"Integration of Environmental Management and SCM", Research Report, ERIM Report Series on Research in Management No. ERS-2005-030-LIS, Erasmus Research Institute of Management, Erasmus Universiteit Rotterdam, The Netherlands, May 2005.

Cui

Cui, J., "Mechanical Recycling of Consumer Electronic Scrap", PhD Thesis, (Advisor: Professor Eric Forssberg), Division of Mineral Processing, Department of Chemical Engineering and Geosciences, Lulea University of Technology, SE-971 87, Lulea, Sweden, May 2005.

Inderfurth

"Impact of Uncertainties on Recovery Behavior in a Remanufacturing Environment", International Journal of Physical Distribution and Logistics Management, Vol. 35 No. 5, 318-336, 2005.

Walther

"Impact of WEEE-Directive on Reverse Logistics in Germany", International Journal of Physical Distribution and Logistics Management, Vol. 35 No. 5, 337-361, 2005.

Turowski

"Analysis of an Adaptive Fuzzy System for Disassembly Process Planning", Proceedings of the 2005 IEEE International Symposium on Electronics and the Environment, New Orleans, Louisiana, pp. 249-254, May 16-19, 2005.

Pan

"Intelligent Disassembly Sequence Planning for EOL Recycling Based on Hierarchical Fuzzy Cognitive Map", Proceedings of the 2005 IEEE International Symposium on Electronics and the Environment, New Orleans, Louisiana, pp. 255-259, May 16-19, 2005.

Adamson

"Environmental Impact of Computer Information Technology in an Institutional Setting: A Case Study at the University of Guelph", Research Report, University of Guelph, Canada, April 2005.

Nagrath

"Multiobjective Optimization Strategies for Linear Gradient Chromatography", AIChE Journal, Vol. 51, No. 2, 511-525, 2005.

Koh

"Uncertainty in ERP-Controlled Manufacturing Systems", International Journal of Enterprise Information Systems, Vol. 1, No. 3, 17-34, 2005.

Kim

"Capacitated Disassembly Scheduling: Minimizing the Number of Products Disassembled", in Lecture Notes in Computer Science, 3483 (ICCSA 2005), Springer-Verlag, pp. 538-547, 2005.

Kim

"A Lagrangean Relaxation Approach for Capacitated Disassembly Scheduling", in Lecture Notes in Computer Science, 3483 (ICCSA 2005), Springer-Verlag, pp. 722-732, 2005.

Ayob

Ayob, M., "Optimisation of Surface Mount Device Placement Machine in Printed Circuit Board Assembly", PhD Thesis, (Advisor: Dr Graham Kendall), School of Computer Science and Information Technology, University of Nottingham, June 2005.

Diaz Baca

"Sistema Robotizado de Desensamblado Automático empleando Robots Cooperativos (Automatic Disassembly Using Robots)", (in Spanish), Proceedings of the XXVI Jornadas de Automatica, September 7-10, Universidad de Alicante, España, 2005.

Stephenson

"Electronic Waste: Observation on the Role of the Federal Government in Encouraging Recycling and Reuse", Research Report, Testimony Before the Subcommittee on Superfund and Waste Management, Committee on Environment and Public Works, U.S. Senate, United States Government Accountability Office, July 26, 2005.

Jose

"Modular and Platform Methods for Product Family Design: Literature Analysis", Journal of Intelligent Manufacturing, Vol. 16, No. 3, 371-390, 2005.

Hedjar

"Receding Horizon Control of a Hybrid Production System with Deteriorating Items", Nonlinear Analysis, Vol. 63, No. 3, 405-422, 2005.

Lambert

"Generating Disassembly Sequences Using Exact and Heuristic Methods Applied to Disassembly Precedence Graphs", Proceedings of the 6th IEEE International Symposium on Assembly and Task Planning (ISATP2005), Montreal, Canada, pp. 47-52, July 19-21, 2005.

Lambert

"Determining Optimum and Suboptimum Disassembly Sequences with an Application to a Cell Phone", Proceedings of the 6th IEEE International Symposium on Assembly and Task Planning (ISATP2005), Montreal, Canada, pp. 260-265, July 19-21, 2005.

Duta

"Applying Equal Piles Approach to Disassembly line Balancing Problem", Proceedings of the 16th IFAC World Congress (IFAC 2005), Prague, July 4-8, CD-ROM, 2005.

Samanta

Samanta, S. K., "Analysis of Finite-Buffer Vacation and Non-Vacation Discrete-Time Queueing Systems", PhD Thesis, (Advisor: Prof. U. C. Gupta), Department of Mathematics, Indian Institute of Technology, Kharagpur, India, September 2005.

Desai

"Incorporating Work Factors in Design for Disassembly in Product Design", Journal of Manufacturing Technology Management, Vol. 16, No. 7, 712-732, 2005.

Nukala

"Designing an Efficient Closed-Loop Supply Chain Network: A Multi-Phase Multi-Criteria Approach", Proceedings of the Sixth International Conference on Operations and Quantitative Management, Indore, India, pp. 668-678, August 9-11, 2005.

Das

"Reliability Consideration in the Design and Analysis of Cellular Manufacturing Ssystems", Proceedings of the 2005 International Conference on Simulation and Modeling, Nakornpathom, Thailand, January 17-19, 2005.

Lim

"Designing a Reverse Supply Chain Network for Product Refurbishment", Proceedings of the 2005 International Conference on Simulation and Modeling, Nakornpathom, Thailand, January 17-19, 2005.

Kim

"An Optimal Algorithm for Disassembly Scheduling with Assembly Product Structure", in Lecture Notes in Computer Science, 3698 (KI2005), Springer-Verlag, pp. 235-248, 2005.

Shimizu

"Multi-Objective Approach for Supporting Design-for-Disassembly Towards Efficient Material Re-utilization", Proceedings of the International Sympsium on EcoTopia Science (ISETS2005), Nagoya, Japan, pp. 337-340, August 8-9, 2005.

Song

"Planning Remanufacturing Systems by Constrained Ordinal Optimization Method with Feasibility Model", Proceedings of the 44th IEEE Conference on Decision and Control, Seville, Spain, pp. 4676-4681 December 12-15, 2005.

Jarupan

Jarupan, L., "Environmental Conscious Design and Operational Strategies for Returnable Transport Packaging", PhD Thesis, (Advisors: Dr. S. V. Kamarthi and Dr. S. M. Gupta), Department of Mechanical and Industrial Engineering, Northeastern University, June 2005.

Gupta

"Long-Range (Strategic) Planning Issues in Reverse Logistics", Proceedings of the International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV05), Garching, Germany, September 22-23, 2005 (CD-ROM).

Imtanavanich

"Multi-Criteria Decision Making Approach in Multiple Periods for a Disassembly-To-Order System under Product’s Deterioration and Stochastic Yields", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 10-21, October 23-24, 2005.

Gonzalez-Torre

"Environmental Practices of the Auxiliary Companies to the Spanish Automobile Industry", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 22-29, October 23-24, 2005.

Udomsawat

"Multi-Kanban Mechanism for Appliance Disassembly", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 30-41, October 23-24, 2005.

Pochampally

"Mechanism for Coordination Between the Collector and the Dismantler in a Reverse Supply Chain", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 42-47, October 23-24, 2005.

Nukala

"A Fuzzy AHP Based Approach for Selecting Potential Recovery Facilities in a Closed Loop Supply Chain", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 58-63, October 23-24, 2005.

Lambert

"A Heuristic Solution for the Disassembly Line Balancing Problem Incorporating Sequence Dependent Costs", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 73-80, October 23-24, 2005.

McGovern

"Uninformed and Probabilistic Distributed Agent Combinatorial Searches for the Unary NP-Complete Disassembly Line Balancing Problem", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 81-92, October 23-24, 2005.

Udomsawat

"The Effect of Sudden Server Breakdown on the Performance of a Disassembly Line", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 93-102, October 23-24, 2005.

Kizilkaya

"Impact of Different Disassembly Line Balancing Algorithms on the Performance of Dynamic Kanban System for Disassembly Line", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 103-110, October 23-24, 2005.

Nakashima

"Optimal Production Policy for a Remanufacturing System with Virtual Inventory Cost", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 140-145, October 23-24, 2005.

Vadde

"Pricing End-Of-Life Components", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 146-154, October 23-24, 2005.

Nukala

"Multi-Criteria Analysis of Potential Recovery Facilities in a Reverse Supply Chain", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 155-162, October 23-24, 2005.

Topcu

"Understanding Facilities Design Parameters for a Remanufacturing System", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 163-173, October 23-24, 2005.

Behret

"Quality of Returns: Is it a Factor in Remanufacturing?", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 201-211, October 23-24, 2005.

Ates

"On the Effect of Part Quality in Hybrid Production Systems", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 212-220, October 23-24, 2005.

Kongar

"A Heuristic Approach Using Multiple Criteria for Environmentally Benign 3PLs Selection Measurement", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 48-57, October 23-24, 2005.

Firdolas

"An Integrated Conceptual Framework for Selecting Reverse Logistics Providers in the Presence of Vagueness", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, Massachusetts, pp. 64-72, October 23-24, 2005.

McGovern

"Local Search Heuristics and Greedy Algorithm for Balancing a Disassembly Line", International Journal of Operations and Quantitative Management, Vol. 11, No. 2, 91-114, 2005.

Lambert

"Exact Method for Disassembly Sequence Optimization Subjected to Sequence Dependent Costs", International Journal of Operations and Quantitative Management, Vol. 11, No. 2, 75-89, 2005.

Arimitsu

"Performance Evaluation of the Remanufacturing System with Consideration for Remanufacturing Opportunities", International Journal of Operations and Quantitative Management, Vol. 11, No. 2, 115-128, 2005.

Pochampally

"Sensible Sale of Used Products on Potential Second-Hand Markets", International Journal of Operations and Quantitative Management, Vol. 11, No. 2, 129-145, 2005.

Kongar

"Evaluation Criteria for Environmentally Benign Forward and Reverse Supply Chain Management", International Journal of Operations and Quantitative Management, Vol. 11, No. 2, 147-173, 2005.

Barba-Gutierrez

"Lot-Sizing Techniques in Reverse MRP", Proceedings of the 24th Annual Workshop of the UK Planning and Scheduling Special Interest Group, London, UK, December 15-16, 2005 (CD-ROM).

Enns

"Lot-Sizing Within Capacity-Constrained Manufacturing Systems Using Time-Phased Planning", Proceedings of the 2005 Winter Simulation Conference, Orlando, FL, pp. 1433-1440, December 4-7, 2005.

Ates

"Interrelation of Production System Design, Quality and Productivity in Hybrid Manufacturing Environments", Proceedings of the 35th International Conference on Computers and Industrial Engineering, Istanbul, Turkey, June 19-22, pp. 191-196, 2005.

Behret

"The Impact of Quality Uuncertainty of Returns in Remanufacturing", Proceedings of the 35th International Conference on Computers and Industrial Engineering, Istanbul, Turkey, June 19-22, pp. 275-280, 2005.

Kilincci

"A New Algorithm Based on Firing Sequences of Transitions for SALBP-1", Proceedings of the 35th International Conference on Computers and Industrial Engineering, Istanbul, Turkey, June 19-22, pp. 1147-1152, 2005.

Kilincci

"Petri Net Based Algorithm for SALBP-2", Proceedings of the 35th International Conference on Computers and Industrial Engineering, Istanbul, Turkey, June 19-22, pp. 1153-1158, 2005.

Kongar

"Efficient Supply Chain via Agile Performance Evaluation (ESCAPE)", Proceedings of the 35th International Conference on Computers and Industrial Engineering, Istanbul, Turkey, June 19-22, pp. 1191-1196, 2005.

Mohebbi

"The impact of component commonalityin an assemble-to-orderenvironment under supplyand demand uncertainty", Omega, Vol. 33, No. 6, 472-482, 2005.

Gungor

"Book Review of 'Disassembly Modeling for Assembly, Maintenance, Reuse, and Recycling' by Lambert, A. J. D. and Gupta, S. M.", International Journal of Production Research, Vol. 43, No. 23, 5101-5103, 2005.

Prakash

"Solving a Disassembly Line Balancing Problem with Task Failure Using a Psychocloonal Algorithm", Proceedings of ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2005), Paper No. DETC2005-84999, Long Beach, California, USA, Sept 24-28, 2005.

Ayob

"Component Pick-and-Place Scheduling using a Weighted Nozzle Rank Approach", Computer Science Technical Report No. NOTTCS-TR-2005-7, School of Computer Science and Information Technology, University of Nottingham, Jubilee Campus, Nottingham, NG8 1BB, UK, 2005.

Dolgui

"A Survey on Supply Planning under Uncertainties in MRP Environments", Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, July 4-8, 2005.

Turowski

"Disassembly Line Design with Uncertainty", Proceedings of the 2005 IEEE International Conference on Systems, Man and Cybernetics, Big Island, Hawaii, pp. 954-959, Oct. 10-12, 2005.

Park

Park. J., “Methods for Incorporating Cost Information into Platform-Based Product Development”, PhD Thesis, (Advisor: Dr. Timothy W. Simpson), Department of Industrial and Manufacturing Engineering, Pennsylvania State University, August 2005.

Kazmierczak

Kazmierczak, K., “Industrial Development of Car Disassembly”, PhD Thesis, (Advisors: Professor Jorgen Winkel, Dr Patrick Neumann and Professor Svend Erik Mathiassen), Ergonomics and Aerosol Technology, Department of Design Sciences, Lund University, Lund, Sweden, 2005.

Tumkor

"Electrical and Electronic Equipment Recovery and Recycling in Turkey", Proceedings of 2005 ASME International Mechanical Engineering Conference and Exposition, Paper No. IMECE2005-81358, Orlando, Florida, Nov. 5-11, 2005.

Kang

"Analysis and Design of Parallel Mechanisms with Flexure Joints", IEEE Transactions on Robotics, Vol. 21, No. 6, 1179-1185, 2005.

McAllister

"Integrating Linear Physical Programming within Collaborative Optimization for Multiobjective Multidisciplinary Design Optimization", Structural and Multidisciplinary Optimization, Vol. 29, No. 3, 178-189, 2005.

Lee

"Design for the Environment: Life Cycle Assessment and Sustainable Packaging Issues", International Journal of Environmental Technology and Management, Vol. 5, No. 1, 14-41, 2005.

Polak

"On A Special Case of the Quadratic Assignment Problem with an Application to Storage-and-Retrieval Devices", Annals of Operations Research, Vol. 138, 223-233, 2005.

McGovern

McGovern, S. M., "Combinatorial Optimization Treatment of the Unary NP-Complete Disassembly Line Balancing Problem", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical and Industrial Engineering, Northeastern University, October 2005.

Tadj

"Optimal Design and Control of Queues", TOP (Journal of the Spanish Statistical and Operations Research Society), Vol. 13, No. 2, 359-412, 2005.

Sinanoglu

"An Assembly Sequence-Planning System for Mechanical Parts using Neural Network", Assembly Automation, Vol. 25, No. 1, 38-52, 2005.

Salmi

"Evaluation des Performances des Systemes Manufacturiers Kanban par Modeles SWN", Proceedings of the Seventh International Symposium On Programming and Systems (ISPS’2005), Algiers, pp. 153-164, May 9-11, 2005.

Vadde

"Smart Sensors in a Flow-Line Manufacturing System: An Agent-based Simulation", Proceedings of the IEEE Conference on Knowledge Intense Multi-Agent Systems (KIMAS), Waltham, MA, pp. 635-640, 2005.

Ritchey

"A Framework to Assess the Economic Viability of Remanufacturing", International Journal of Industrial Engineering, Vol. 12, No. 1, 89-100, 2005.

Sakara

Sakara, D., "Modelling and Scheduling of Remanufacturing Systems", PhD Thesis, (Advisor: Professor Paul Xirouchakis), Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland, 2005.

Chae

"An Absorbing Markov Chain Approach to GI/M/1 Queues with Generalized Vacations", Asia Pacific Management Review, Vol. 10, No. 3, 163-167, 2005.

Maudet

"Choice of an Adapted End-Of-Life Scenario by Recovery Chain Modelling", Proceedings of the 17th IMACS World Congress, Paris, France, July 11-July15, 2005.

Hermansson

"Managing the Remanufacturing Organization for an Optimal Product Life Cycle", Proceedings of the Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, Dec. 12-14, pp. 146-153, 2005.

Murayama

"Adaptive Production Planning by Information Sharing for Reverse Supply Chain", Proceedings of the Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, Dec. 12-14, pp. 326-331, 2005.

Ijomah

"A Robust Description and Tool for Remanufacturing: A Resource and Energy Recovery Strategy", Proceedings of the Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, Dec. 12-14, pp. 472-479, 2005.

Mejia

"An Approach Using Petri Nets and Improved Heuristic Search for Manufacturing System Scheduling", Journal of Manufacturing Systems, Vol. 24, No. 2, 79-92, 2005.

Kondoh

"Simulation of Closed-Loop Manufacturing Systems Focused on Material Balance of Forward and Inverse Flows", Proceedings of ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2005), Paper No. DETC2005- 85578, Long Beach, California, USA, Sept 24-28, 2005.

Friedel

"Design for Reuse and Recycling of Electronic Circuits", Global Symposium on Recycling, Waste Treatment and Clean Technology (REWAS'04), pp. 2843-2844, 2005.

Pongracz

"The Impact of the European Waste Electrical and Electronic Equipment Directive (WEEE): Development of Waste Management Strategies in Finland", Journal of Solid Waste Technology and Management, Vol. 31, No. 2, 102-111, 2005.

Choi

"Modeling of Automotive Recycling Planning in the United States", International Journal of Automotive Technology, Vol. 6 No. 4, 413-419, 2005.

Noureddine

"Modelling and Analysis Flexible Manufacturing Systems", Information Technology Journal, Vol. 4 No. 3, 233-238, 2005.

Melachrinoudis

"Consolidating a Warehouse Network: A Physical Programming Approach", International Journal of Production Economics, Vol. 97, No. 1, 1-17, 2005.

Koh

"An Empirical Study of the Effects of Uncertatinty on SME Manufacturers", International Journal of Services and Operations Managment, Vol. 1, No. 4, 395-425, 2005.

Atan

"Application on Optimal Portfolio Selection Model at ISE 100 Index with Multiple Aim Goal Programming (in Turkish)", National Finance Symposium – “Strategic Finance”, Cappadocia, Nevsehir, Turkey, 29 - 30 September 2005.

Gregor

"Simulation in Factory Optimsation", Applied Computer Science, Vol. 1, No. 1, 61-74, 2005.

Shah

Shah P., "Optimizing Usage of Recycled Material in a Remanufacturing Environment", Master's Thesis, (Advisor: Professors A. Gosavi and R. Nagi), Department of Industrial Engineering, University of Buffalo, New York, 2005.

Pourmohammadi

Pourmohammadi, H., "Green Logistics for Regional Industrial Waste Materials and By-Products", PhD Thesis, (Advisor: Professor M. Rahimi), Department of Industrial and Systems Engineering, University of Southern California, 2005.

Kumar

"An Expert Enhanced Coloured Fuzzy Petri Net Approach to Reconfigurable Manufacturing Systems Involving Information Delays", International Journal of Advanced Manufacturing Technology, Vol. 26, No. 7-8, 922-933, 2005.

Jose Flores

Jose Flores, A., "Contribution aux Méthodes de Conception Modulaire de Produits et Processus Industriels (in French)", PhD Thesis, (Advisor: Dr. M. Tollenaere), National Polytechnic Institute of Grenoble, France, 2005.

Zwingmann

Zwingmann, X., "Modele D’Evaluation de la Fiabilite et de la Maintenabilite au stade de la Conception (in French)", PhD Thesis, (Advisors: Drs. D. Ait-Kadi and B. Mutel), Universite Laval Quebec, Canada and Universite Louis-Pasteur Strasbourg, France, 2005.

Wang

"Minimizing WIP for Unbalanced Assembly Line in Value Stream Mapping", Proceedings of the 2005 Institute of Industrial Engineering Research Conference, Atlanta, Georgia, May 14-18, 2005 (CD-ROM).

Eroglu

"Forecasting Model Selection for the Inventory Scheduling in Just In Time Philosophy", Proceedings of the International Logistics and Supply Chain Congress, Istanbul, Turkey, November 23-24, 2005.

Lambert

Lambert, S., "Ingenierie des processus de la logistique inverse (Engineering the Processes of Reverse Logistics)" (in French), PhD Thesis, (Advisor: Professor Diane Riopel), Ecole Polytechnique, Montreal (Canada), 2005.

Ho

"A Hybrid Genetic Algorithm for Sequencing PCB Component Placement", International Journal of Knowledge-Based and Intelligent Engineering Systems, Vol. 9, No. 2, 129-136, 2005.

Tohka

"Mechanical and Thermal Recycling of Waste from Electric and Electrical Equipment", Research Report, Laboratory of Energy Engineering and Environmental Protection Report No. TKK-ENY-25, Department of Mechanical Engineering, Helsinki University of Technology, Finland, 2005.

Chanron

"Handling Multiple Objectives in Decentralized Design", Proceedings of ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2005), Paper No. DETC2005- 84807, Long Beach, California, USA, Sept 24-28, 2005.

Xie

"Economical Analysis and Optimization of Recovery Processing Policies about Discarded Product", Ecological Economy, Vol. 1, No. 2, 44-51, 2005.

Bloemhof

"Sustainable Supply Chains for the Future", Medium Econometrische Toepassingen, Vol. 13, No. 1, 12-15, 2005.

Jain

"Controllable Multi-Server Queue with Balking", International Journal of Engineering, Vol. 18, No. 3, 263-271, 2005.

Fernandez

"Identification of Research Areas within Reverse Logistics A Focus Group Technique Application", Journal of Management Systems, Vol. 17, No. 1, 17-25, 2005.

Tuncel

Tuncel, G., "A High-Level Petri Net Based Decision Support System for Real-Time Scheduling and Control of Flexible Manufacturing Systems: An Object-Oriented Approach", PhD Thesis, (Advisor: Prof. Dr. G. M. Bayhan), Graduate School of Natural and Applied Sciences, Dokuz Eylul University, Turkey, 2005.

Geneste

"Management of Demand Uncertainty Within MRPII Using Possibility Theory", Proceedings of the 16th IFAC World Congress (IFAC 2005), Prague, July 4-8, CD-ROM, 2005.

Jun

"Research Issues on Closed Loop PLM: Promise Approach", Proceedings of the 18th International Conference on Production Research (ICPR-18), Fisciano (SA), Italy, CD-ROM, July 31 - August 4, 2005.

Golinska

"Method of Implementation of the Crisis Management Procedures in Production Planning", Proceedings of the 18th International Conference on Production Research (ICPR-18), Fisciano (SA), Italy, CD-ROM, July 31 - August 4, 2005.

Yura

"Environmental Impacts of Product Refurbishment Systems", Proceedings of the 18th International Conference on Production Research (ICPR-18), Fisciano (SA), Italy, CD-ROM, July 31 - August 4, 2005.

Nakashima

"A New Approach to Environmental Performance Evaluation", Proceedings of the 18th International Conference on Production Research (ICPR-18), Fisciano (SA), Italy, CD-ROM, July 31 - August 4, 2005.

Angell

"Integrating Environmental Issues into the Mainstream: An Agenda for Research in Operations Management", in Operations Management: A Strategic Approach, Edited by A. Bettley, D. Mayle, and T. Tantoush, Sage Publications Ltd, London, Chapter 17, 193-218, ISBN: 978-1412919029, 2005.

Koc

Koc, A., "Inquiring the Main Assumption of the Assembly Line Balancing Problem: Solution Procedures using AND/OR Graph", Master's Thesis, (Advisor: Prof. Ihsan Sabuncuoglu), Department of Industrial Engineering, Bilkent University, Bilkent Ankara, Turkey, July 2005.

Soto Zuluaga

Soto Zuluaga, J. P., "Reverse Logistics: Models and Applications", PhD Thesis, (Advisor: Prof. Helena Ramalhinho), Universitat Pompeu Fabra, Barcelona, Spain, 2005.

Wyld

"The EBAY Factor: The Online Auction Solution to the Riddle of Reverse Logistics", Academy of Information and Management Sciences Journal, Vol. 8, No. 2, 105-113, 2005.

Kang

Kang, J.-G., "Non-Linear Disassembly Planning for Increasing the End-Of-Life Value of Products", PhD Thesis, (Advisor: Professor Paul Xirouchakis), Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland, 2005.

Kim

Kim, H.-J., "Disassembly Scheduling: Models and Algorithms", PhD Thesis, (Advisor: Professor Paul Xirouchakis), Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland, 2005.

Soler

Soler, J. B., "Exploratory Study of a Foreign Market: Remanufacturing in the Automotive Sector in Spain", Master's Thesis, (Advisor: Dr. M. B. Cook), Cranfield University at Silsoe, 2005.

Jadhav

Jadhav, P. D., "Simulation Modeling and Analysis of Printed Circuit Board Assembly Lines", Master's Thesis, (Advisor: Dr. Jeffrey S. Smith), Auburn University, December 2005.

Bostel

"The Design, Planning, and Optimization of Reverse Logistics Networks", in Logistics Systems: Design and Optimization, Edited by Andre Langevin and Diane Riopel, Springer Science, New York, pp. 171-212, Chapter 6, ISBN: 0-387-24971-0, 2005.

Abdullah

"A Methodology to Evaluate Design Efficiency Based on Assembly Criteria in Support of Design for Modularity", Journal of the Institution of Engineers-Malaysia, Vol. 66, No. 1, 34-40, 2005.

Gerrard

Gerrard, J., "The Environmental Impact of End-Of-Life Vehicle Legislation and Vehicle Use in Europe and North America", Master's Thesis, (Advisor: Dr. Milind Kandlikar), Resource Management and Environmental Studies, University of British Columbia, Vancouver, Canada, 2005.

Erkus

Erkus, O. M., "A Control Point Policy Approach for the Remanufacturing Workshop", Master's Thesis, (Advisor: Dr. A. Korugan), Department of Industrial Engineering, Bogazici University, Istanbul, Turkey, 2005.

Lambert

"Generation of Assembly Graphs by Systematic Analysis of Assembly Structures", European Journal of Operational Research, Vol. 168, No. 3, 932-951, 2006.

Sarin

"A Precedence-Constrained Asymmetric Traveling Salesman Model for Disassembly Optimization", IIE Transactions, Vol. 38, No. 3, 223-237, 2006.

Schultmann

"Modeling Reverse Logistic Tasks within Closed-Loop Supply Chains: An Example From the Automotive Industry", European Journal of Operational Research, Vol. 171, No. 3, 1033-1050, 2006.

Qu

"Viable Plastics Recycling From End-of-Life Electronics", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 29, No. 1, 25-31, 2006.

Kongar

"Disassembly To Order System Under Uncertainty", Omega, Vol. 34, No. 6, 550-561, 2006.

Teunter

"Determining Optimal Disassembly and Recovery Strategies", Omega, Vol. 34, No. 6, 533-537, 2006.

Lambert

"Exact Methods in Optimum Disassembly Sequence Search for Problems Subject to Sequence Dependent Costs", Omega, Vol. 34, No. 6, 538-549, 2006.

Franke

"Remanufacturing of Mobile Phones - Capacity, Program and Facility Adaptation Planning", Omega, Vol. 34, No. 6, 562-570, 2006.

Zhou

"Dynamic Performance of a Hybrid Inventory System with a Kanban Policy in Remanufacturing Process", Omega, Vol. 34, No. 6, 585-598, 2006.

Viswanathan

"Product Configuration Optimization for Disassembly Planning: A Differential Approach", Omega, Vol. 34, No. 6, 599-616, 2006.

Inderfurth

"Heuristics for Solving Disassemble-To-Order Problems with Stochastic Yields", OR Spectrum, Vol. 28, No. 1, 73-99, 2006.

Gonzalez

"A Scatter Search Approach to the Optimum Disassembly Sequence Problem", Computers and Operations Research, Vol. 33, No. 6, 1776-1793, 2006.

Framinan

"Dynamic Card Controlling in a Conwip System", International Journal of Production Economics, Vol. 99, No. 1-2, 102-116, 2006.

Koh

"Managing Uncertainty in ERP-Controlled Manufacturing Environments in SMEs", International Journal of Production Economics, Vol. 101, No. 1, 109-127, 2006.

Kim

"Two-Phase Heuristic for Disassembly Scheduling with Multiple Product Types and Parts Commonality", International Journal of Production Research, Vol. 44, No. 1, 195-212, 2006.

Willems

"Can Large-Scale Disassembly be Profitable? A Linear Programming Approach to Quantifying the Turning Point to Make Disassembly Economically Viable", International Journal of Production Research, Vol. 44, No. 6, 1125-1146, 2006.

Wang

"Optimal Models for a Multi-Stage Supply Chain System Controlled by Kanban under Just-In-Time Philosophy", European Journal of Operational Research, Vol. 172, No. 1, 179-200, 2006.

Kumanan

"Estimating Product Development Cycle Time using Petri Nets", International Journal of Advanced Manufacturing Technology, Vol. 28, No. 1-2, 215-220, 2006.

French

"Closed-Loop Supply Chains in Process Industries: An Empirical Study of Producer Re-Use Issues", Journal of Operations Management, Vol. 24, No. 3, 271-286, 2006.

Giudice

"Product Design for the Environment: A Life Cycle Approach", CRC/Taylor & Francis, Boca Raton, Florida, ISBN: 0-8493-2722-9, 2006.

Brander

Brander, P., “Inventory Control and Scheduling Problems in a Single-Machine Multi-Item System”, PhD Thesis, (Advisor: Professor Anders Segerstedt), Lulea University of Technology, Department of Business Administration and Social Sciences, Division of Industrial Logistics, Lulea, Sweden, 2006.

Shih

"Intelligent Evaluation Approach for Electronic Product Recycling via Case-Based Reasoning", Advanced Engineering Informatics, Vol. 20, No. 2, 137-145, 2006.

Udomsawat

"Effect of Preventive Maintenance Interruptions on the Performance of a Disassembly Line", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

Nukala

"Strategic and Tactical Planning of a Closed-Loop Supply Chain Network: A Linear Physical Programming Approach", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

Nukala

"A Multi-Phase Mathematical Programming Approach for the Efficient Design and Effective Marketing of a Closed-Loop Supply Chain Network", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

Nukala

"A Single Phase Unified Approach for Designing a Closed-Loop Supply Chain Network", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

Imtanavanich

"Weighted Fuzzy Goal Programming Approach for a Disassembly-to-Order System", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

Imtanavanich

"Linear Physical Programming Approach for a Disassembly-To-Order System under Stochastic Yields and Product’s Deterioration", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

McGovern

"Performance Metrics for End-Of-Life Product Processing", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

Johar

"Inventory Issues Arising from Balancing a Disassembly Line", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

Vadde

"Pricing End-of-Life Items with Inventory Constraints", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

Firdolas

"A Reverse Logistics Provider Selection Framework", Proceedings of the 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006 (CD-ROM).

Vorasayan

"A General Queuing Network Model to Optimize Refurbishing Policies for Returned Products", 2006 POMS-Boston Meeting, Boston, Massachusetts, April 28-May 1, 2006.

Ho

"A Genetic Algorithm Approach to Optimising Component Placement and Retrieval Sequence for Chip Shooter Machines", International Journal of Advanced Manufacturing Technology, Vol. 28, No. 5-6, 556-560, 2006.

Guide

"Supply-Chain Management for Recoverable Manufacturing Systems", in Supply Chains and Total Product Systems: A Reader, Edited by Ed Rhodes, James Warren and Ruth Carter, Blackwell Publishing, Malden, Massachusetts, USA, pp. 365-380, Chapter 3.8, ISBN: 1405124105, 2006.

Drizo

"Environmental Impacts of Rapid Prototyping: An Overview of Research to Date", Rapid Prototyping Journal, Vol. 12, No. 2, 64-71, 2006.

Koh

"Translating Knowledge of Supply Chain Uncertainty into Business Strategy and Actions", Journal of Manufacturing Technology Management, Vol. 17, No. 4, 472-485, 2006.

Koh

"A Knowledge Management Approach for Managing Uncertainty in Manufacturing", Industrial Management and Data Systems, Vol. 106, No. 4, 439-459, 2006.

Pun

"Determinants of Environmentally Responsible Operations: A Review", International Journal of Quality and Reliability Management, Vol. 23, No. 3, 279-297, 2006.

Vorasayan

Vorasayan, J., "A General Queuing Network Model to Optimize Refurbishing Policies for Returned Products", PhD Thesis, (Advisor: Professor S. M. Ryan), Department of Industrial Engineering, Iowa State University, 2006.

Vadde

"Pricing of End-of-Life Items with Obsolescence", Proceedings of the 2006 IEEE International Symposium on Electronics and the Environment, San Francisco, California, pp. 156-160, May 8-11, 2006.

Nukala

"Planning an Efficient Closed-Loop Supply Chain Network: A Unified Single Phase Approach", Proceedings of the 2006 IEEE International Symposium on Electronics and the Environment, San Francisco, California, p. 362, May 8-11, 2006.

Herrmann

"Design and Control of Material Flow Networks for the Recycling of WEEE", Proceedings of the 2006 IEEE International Symposium on Electronics and the Environment, San Francisco, California, pp. 340-345, May 8-11, 2006.

Nakashima

"Markov Analysis of an Environmental Conscious Manufacturing System with Stochastic Variability", International Journal of Global Logistics and Supply Chain Management, Vol. 1, No. 1, 17-24, 2006.

Bonavia

"An Empirical Study of Lean Production in the Ceramic Tile Industry in Spain", International Journal of Operations and Production Management, Vol. 26, No. 5, 505-531, 2006.

Adenso-Diaz

"Dealing with Bi-Criteria in Disassembly Scheduling", Proceedings of the International Conference on Knowledge Engineering and Decision Support (ICKEDS’06), pp. 243-247, Lisbon, Portugal, May 10-11, 2006.

Stuart-Williams

"Plastic Separation Planning for End-of-Life Electronics", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 29, No. 2, 110-118, 2006.

Murthy

"Warranty Management and Product Manufacture", Springer-Verlag, London, ISBN: 1852339330, 2006.

Yetere

Yetere, A., "Part Selection Problem in Disassembly Systems", Master's Thesis, (Advisors: Drs. L. Kandiller and M. Azizoglu), Department of Industrial Engineering, Middle East Technical University, Ankara, Turkey, January 2006.

Tang

"Fuzzy-Petri-Net-Based Disassembly Planning Considering Human Factors", IEEE Transactions on Systems, Man and Cybernetics-Part A: Systems and Humans, Vol. 36, No. 4, 718-726, 2006.

Gungor

"Evaluation of Connection Types in Design for Disassembly (DFD) Using Analytic Network Process", Computers and Industrial Engineering, Vol. 50, No. 1-2, 35-54, 2006.

Seo

"A Learning Algorithm Based Estimation Method for Maintenance Cost of Product Concepts", Computers and Industrial Engineering, Vol. 50, No. 1-2, 66-75, 2006.

Williams

"A Review of Electronics Demanufacturing Processes", Resources, Conservation and Recycling, Vol. 47, No. 3, 195-208, 2006.

Boughton

"Environmental Assessment of Shredder Residue Management", Resources, Conservation and Recycling, Vol. 47, No. 1, 1-25, 2006.

Tang

"A Systematic Approach to Design and Operation of Disassembly Lines", IEEE Transactions on Automation Science and Engineering, Vol. 3, No. 3, 324-329, 2006.

Imtanavanich

"Calculating Disassembly Yields in a Multi-Criteria Decision Making Environment for a Disassembly-to-Order System", in Applications of Management Science In Productivity, Finance, and Operations, Edited by Kenneth D. Lawrence and Ronald K. Klimberg, Elsevier, Ltd, pp. 109-125, ISBN: 0-7623-1221-1, 2006.

McGovern

"Deterministic Hybrid and Stochastic Combinatorial Optimization Treatments of an Electronic Product Disassembly Line", in Applications of Management Science In Productivity, Finance, and Operations, Edited by Kenneth D. Lawrence and Ronald K. Klimberg, Elsevier, Ltd, pp. 175-197, ISBN: 0-7623-1221-1, 2006.

Iyer

"On the Waiting Time in the GI/M/1 Vacations Queues with Dependency Between Interarrival and Service Times", Research Paper, Department of Mathematics, Indian Institute of Science, Bangalore, India, 2006.

Pawar

Pawar, A. K., "Simulation Based Performance Evaluation of Various Policies in Multi-Echelon Supply Chain", Master's Thesis, (Advisors: Professor Professors V. Prabhu and C. D. Ray), Pennsylvania State University, May 2006.

Mondal

"An Empirical Investigation on the Feasibility of Remanufacturing Activities in the Indian Economy", International Journal of Business Environment, Vol. 1, No. 1, 70-88, 2006.

Mondal

"Buy-Back Policy Decision in Managing Reverse Logistics", International Journal of Logistics Systems and Management, Vol. 2, No. 3, 255-264, 2006.

Kang

"Economic Analysis of Electronic Waste Recycling: Modeling the Cost and Revenue of a Materials Recovery Facility in California", Environmental Science and Technology, Vol. 40, No. 6, 1672-1680, 2006.

Tumkor

"New Engineering Design Concepts for Sustainable Products", Proceedings of 113th Annual ASEE Conference, Chicago, Illinois, June 18-21, 2006.

Berne

"Multi Criteria Credit Rating (MCCR): A Credit Rating Assignment Process for Italian Enterprises According to Basel II", Proceedings of the 18th International Conference on Multiple Criteria Decision Making Conference, Chania, Crete, Greece, June 19-23, 2006.

Tseng

"Guided Genetic Algorithms for Solving a Larger Constraint Assembly Problem", International Journal of Production Research, Vol. 44, No. 3, 601-625, 2006.

Sangwan

"Performance Value Analysis for Justification of Green Manufacturing Systems", Journal of Advanced Manufacturing Systems, Vol. 5, No. 1, 59-73, 2006.

Lambert

"Flexibility Analysis of a Surface Mount Technology Electronic Assembly Plant: An Integrated Model Using Simulation", International Journal of Flexible Manufacturing Systems, Vol. 17, No. 2, 151-167, 2006.

Bollapragada

"Replenishment Planning in Discrete-Time, Capacitated, Non-Stationary, Stochastic Inventory Systems", IIE Transactions, Vol. 38, No. 7, 583-595, 2006.

Grubbstrom

"Optimal Production Opportunities in a Remanufacturing System", International Journal of Production Research, Vol. 44, No. 18-19, 3847-3862, 2006.

Bulgak

"Analysis and Design of Split and Merge Unpaced Assembly Systems by Metamodelling and Stochastic Search", International Journal of Production Research, Vol. 44, No. 18-19, 3953-3966, 2006.

Nakashima

"A New Approach to Environmental-Performance Evaluation", International Journal of Production Research, Vol. 44, No. 18-19, 4137-4143, 2006.

Lai

"QFD Optimization Using Linear Physical Programming", Engineering Optimization, Vol. 38, No. 5, 593-607, 2006.

Garg

"Maintenance Management: Literature Review and Directions", Journal of Quality in Maintenance Engineering, Vol. 12, No. 3, 205-238, 2006.

Srivastava

"Managing Product Returns for Reverse Logistics", International Journal of Physical Distribution and Logistics Management, Vol. 36 No. 7, 524-546, 2006.

Lim

"The Impact of Facility Layout on Overall Remanufacturing System Performance", International Journal of Industrial and Systems Engineering, Vol. 1, No. 3, 357-371, 2006.

Tsoulfas

"Environmental Principles Applicable to Supply Chains Design and Operation", Journal of Cleaner Production, Vol. 14, No. 18, 1593-1602, 2006.

Jun

"State-of-the Art: Research Issues and Framework for Enhancing the Productivity of Reverse Logistics Using Emerging Information Technologies", Asia-Pacific Productivity Conference (APPC), Seoul National University, Seoul, Korea, 2006.

He

"WEEE Recovery Strategies and the WEEE Treatment Status in China", Journal of Hazardous Materials, Vol. 136, No. 3, 502-512, 2006.

Vadde

"Determination of Optimal Prices for End-of-Life Items from a Discrete Set", Proceedings of the Seventh International Conference on Operations and Quantitative Management, pp. 604-614, Jaipur, India, August 3-5, 2006.

Viswanathan

"Modeling Supply Chain Optimization-A Goal Programming Approach", Proceedings of the Seventh International Conference on Operations and Quantitative Management, pp. 508-520, Jaipur, India, August 3-5, 2006.

Chae

"On Stochastic Decomposition in the GI/M/1 Queue with Single Exponential Vacation", Operations Research Letters, Vol. 34, No. 6, 706-712, 2006.

Kuo

"Enhancing Disassembly and Recycling Planning using Life-Cycle Analysis", Robotics and Computer Integrated Manufacturing, Vol. 22, No. 5-6, 420-428, 2006.

Hnaien

"Optimal Release Dates in Multi Period and Multilevel Supply Chain with Random Lead Times", Proceedings of the 2nd European Modeling and Simulation Symposium, Barcelona, Spain, October 4-6, 2006.

Teunter

"Dynamic Lot Sizing with Product Returns and Remanufacturing", International Journal of Production Research, Vol. 44, No. 20, 4377-4400, 2006.

McGovern

"Ant Colony Optimization for Disassembly Sequencing with Multiple Objectives", International Journal of Advanced Manufacturing Technology, Vol. 30, No. 5-6, 481-496, 2006.

Kongar

"Disassembly Sequencing using Genetic Algorithm", International Journal of Advanced Manufacturing Technology, Vol. 30, No. 5-6, 497-506, 2006.

Dong

"A Hierarchical Approach to Disassembly Sequence Planning for Mechanical Product", International Journal of Advanced Manufacturing Technology, Vol. 30, No. 5-6, 507-520, 2006.

Fernandez

"Part Grasping for Automated Disassembly", International Journal of Advanced Manufacturing Technology, Vol. 30, No. 5-6, 540-553, 2006.

Al-Tahat

"Design and Analysis of Production Control Scheme for Kanban-Based JIT Environment", Journal of the Franklin Institute, Vol. 343, No. 4-5, 521-531, 2006.

Hui

"A Genetic Algorithm for Product Disassembly Sequence Planning", Proceedings of the IEEE International Conference on Engineering of Intelligent Systems (ICEIS2006), Islamabad, Pakistan, pp. 1-5, April 22-23, 2006.

Takahashi

"Research and Issues on Kanban Systems (in Japanese)", Journal of Japan Industrial Management Association, Vol. 57, No. 2, 89-100, 2006.

Pan

"Human and Social Behavior in Computational Modeling and Analysis of Egress", Automation in Construction, Vol. 15, No. 4, 448-461, 2006.

Kim

"A Lagrangean Heuristic Algorithm for Disassembly Scheduling with Capacity Constraints", Journal of Operational Research Society, Vol. 57, No. 10, 1231-1240, 2006.

Mukherjee

"Analysis of Issues Relating to Remanufacturing Technology – A Case of an Indian Company", Proceedings of the second European Conference on Management of Technology, Birmingham, United Kingdom, pp. 510 - 518, September 10-12, 2006.

Hong

"Planning the e-Scrap Reverse Production System Under Uncertainty in the State of Georgia: A Case Study", IEEE Transactions on Electronics Packaging Manufacturing, Vol. 29, No. 3, 150-162, 2006.

Moattar Husseini

"A method to enhance volume flexibility in JIT production control", International Journal of Production Economics, Vol. 104, No. 2, 653-665, 2006.

McGovern

"Computational Complexity of a Reverse Manufacturing Line", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 1-12, October 1-3, 2006.

Johar

"Balancing Inventory Generated from a Disassembly Line: Mathematical Approach", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 13-21, October 1-3, 2006.

Kizilkaya

"Dynamic Kanban System for Disassembly Line Applied to an Industrial Voice Recognition Client Unit", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 22-29, October 1-3, 2006.

Imtanavanich

"Evolutionary Computation with Linear Physical Programming for Solving a Disassembly-to-Order System", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 30-41, October 1-3, 2006.

Vadde

"Pricing Decisions for Product Recovery Facilities in a Multi-Criteria Setting using Genetic Algorithms", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 108-118, October 1-3, 2006.

Nukala

"A Six Sigma Tolerancing Approach for the Design of an Efficient Closed-Loop Supply Chain Network", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 123-129, October 1-3, 2006.

Nukala

"Supplier Selection in a Closed-Loop Supply Chain Network: An ANP-Goal Programming Based Methodology", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 130-138, October 1-3, 2006.

Pochampally

"Total Quality Management (TQM) in a Reverse Supply Chain", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 139-148, October 1-3, 2006.

Nukala

"Strategic and Tactical Planning of a Closed-Loop Supply Chain Network under Uncertainty", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 157-164, October 1-3, 2006.

Nukala

"Effective Marketing of a Closed-Loop Supply Chain Network: A Fuzzy QFD Approach", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 165-171, October 1-3, 2006.

Udomsawat

"Controlling Disassembly Line with Multi-Kanban System", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 42-53, October 1-3, 2006.

Imtanavanich

"Solving a Disassembly-to-Order System by using Genetic Algorithm and Weighted Fuzzy Goal Programming", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 54-56, October 1-3, 2006.

Lambert

"Optimum Disassembly Sequencing", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 57-67, October 1-3, 2006.

Nakashima

"Optimal Inventory Control with Consideration for LCA", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 119-122, October 1-3, 2006.

Kongar

"Coupling Data Envelopment Analysis with Material Flow Analysis to Evaluate the Anthropogenic Iron Cycle", Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, pp. 97-107, October 1-3, 2006.

Ke

"A Single Vacation Model G/M/1/K with N Threshold Policy", Sankhya: The Indian Journal of Statistics, Vol. 68, No. 2, 198-226, 2006.

Kuttner

"Coordination of Complex Tasks of Engineering Product and Manufacturing Process Optimization", Proceedings of the Estonian Academy of Sciences - Engineering, Vol. 12, No. 3-1, 163-175, 2006.

Shu

"Using Intuitionistic Fuzzy Sets for Fault-Tree Analysis on Printed Circuit Board Assembly", Microelectronics Reliability, Vol. 46, No. 12, 2139-2148, 2006.

Haoues

Haoues, N., "Contribution a L’Integration des Contraintes de Desassemblage et de Recyclage des les Premieres Phases de Conception de Produits (in French)", PhD Thesis, (Advisors: Drs. D. Froelich and D. Brissaud), École Nationale Supérieure d'Arts et Métiers, Institut Conception, Mécanique et Environnement, Chambéry, June 2006.

Banda

"To Disassemble or Not: A Computational Methodology for Decision Making", Journal of Intelligent Manufacturing, Vol. 17, No. 5, 621-634, 2006.

Xu

"The Asymptotic Stability of a Series Repairable System (in Chinese)", Acta Mathematicae Applicatae Sinica, Vol. 29, No. 1, 46-52, 2006.

Kilincci

"A Petri Net Approach for Simple Assembly Line Balancing Problems", International Journal of Advanced Manufacturing Technology, Vol. 30, No. 12, 1165-1173, 2006.

Kungas

Kungas, P., "Distributed Agent-Based Web Service Selection, Composition and Analysis through Partial Deduction", PhD Thesis, (Advisor: Dr. Mihhail Matskin), Department of Computer and Information Science, Norwegian University of Science and Technology, Trondheim, Norway, 2006.

Hermansson

Hermansson, H., "Development of an Automized Cleaning Process for Toner Cartridges (in Swedish)", Master's Thesis, (Advisor: Dr. E. Sundin), Linkoping University, Sweden, 2006.

Jeon

Jeon, H.-B., "A Study on Capacitated Disassembly Scheduling Problems", Master's Thesis, (Advisor: Dr. D.-H. Lee), Department of Industrial Engineering, Hanyang University, Korea, 2006.

Maudet

"A Method for Recycled Plastic Integration in the Automotive Industry", Proceedings of the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium, pp. 311-316, May 31-June 2, 2006.

Kadi

"A Design Support Framework for Wheelchairs Recycling", Proceedings of the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium, pp. 383-388, May 31-June 2, 2006.

Michaud

"An Economic Perspective on Remanufactured Products: Industrial and Consumption Challenges for life Cycle Engineering", Proceedings of the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium, pp. 543-548, May 31-June 2, 2006.

Seitz

"Challenging the Implementation of Corporate Sustainability: The Case of Automotive Engine Remanufacturing", Business Process Management Journal, Vol. 12, No. 6, 822-836, 2006.

Ferrao

"Strategies for Meeting EU End-of-Life Vehicle Reuse/Recovery Targets", Journal of Industrial Ecology, Vol. 10, No. 4, 77-93, 2006.

Crotty

"Strategic Responses to Environmental Regulation in the U.K. Automotive Sector: The European Union End-of-Life Vehicle Directive and the Porter Hypothesis", Journal of Industrial Ecology, Vol. 10, No. 4, 95-111, 2006.

Jain

"Performance Modeling of FMS with Flexible Process Plans – A Petri Net Approach", International Journal of Simulation Modelling, Vol. 5, No. 3, 101-113, 2006.

Tan

"A Decision-Making Model for Reverse Logistics in the Computer Industry", International Journal of Logistics Management, Vol. 17, No. 3, 331-354, 2006.

French

"Returns in Process Industries: A Managerial Perspective", Management Research News, Vol. 29, No. 12, 769-781, 2006.

Wang

"A Hybrid Heuristic Approach for Disassembly/Recycle Applications", Proceedings of the Sixth International Conference on Intelligent Systems Design and Applications (ISDA'06), Jinan, Shandong, China, pp. 985-995, October 16-18, 2006.

Wang

"Ant Colony Optimization for Disassembly Sequence Planning", Proceedings of the ASME 2006 Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC'06), Philadelphia, PA, (Paper No. DETC2006-99004), September 10-13, CD-ROM, 2006.

Huang

"Optimum Disassembly Process With Genetic Algorithms for a Compressor", Proceedings of the ASME 2006 Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC'06), Philadelphia, PA, (Paper No. DETC2006-99425), September 10-13, CD-ROM, 2006.

Qiu

"A Risk- Based Approach to Support Global Coordination in Distributed Environment", Proceedings of the ASME 2006 Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC'06), Philadelphia, PA, (Paper No. DETC2006-99158), September 10-13, CD-ROM, 2006.

Hamdi

"Exploration in the Preliminary Mechanical Design of Trade-offs Between Automotive Architectural Constraints and Aggregate Noise Performances", Proceedings of the ASME 2006 Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC'06), Philadelphia, PA, (Paper No. DETC2006-99498), September 10-13, CD-ROM, 2006.

Kim

"Disassembly Scheduling with Capacity Constraints: Minimizing the Number of Products Disassembled", Journal of Engineering Manufacture, Vol. 220, No. B9, 1473-1481, 2006.

Kang

"Disassembly Sequencing for Maintenance: A Survey", Journal of Engineering Manufacture, Vol. 220, No. B10, 1697-1716, 2006.

Ke

"Vacation Policies for Machine Interference Problem with an Un-Reliable Server and State-Dependent Service Rate", Journal of the Chinese Institute of Industrial Engineers, Vol. 23, No. 2, 100-114, 2006.

Riddle

"Minimizing Disassembly Costs in Remanufacturing", Proceedings of the 2006 Southeastern INFORMS Conference, Myrtle Beach, South Carolina, pp. 690-698, October 5-6, 2006.

Murayama

"Production Planning and Simulation for Reverse Supply Chain", JSME International Journal Series C, Vol. 49, No. 2, 281-286, 2006.

Kabongo

Kabongo, J. D., "Residual Valorization: A Case Study in Twelve Canadian Firms (in French)", PhD Thesis, (Advisor: Professor Olivier Boiral), Department of Management, Faculty of Administrative Sciences, Laval University, Quebec (Canada), 2006.

Poulios

"WEEE Processing: Perspectives of Material Recovery Through Disassembly in Greece", Proceedings of the 8th Conference on Protection and Restoration of the Environment, Chania, Greece, July 3-7, 2006.

Giard

"Production à flux tirés dans une chaîne logistique (Production with Pull Systems in a Logistic Chain)", (in French),6th French-speaking Conference of Modeling and Simulation Modeling, Optimization and Simulation of the Systems (MOSIM06), Rabat, Morocco, April 3-5, 2006.

Shah

Shah, H., "Robust Kanban Design for a Lean Supply Chain", PhD Thesis, (Advisor: Dr. David Lyth), Department of Industrial and Manufacturing Engineering, Western Michigan University, 2006.

Patel

Patel, G. S., "A Stochastic Production Cost Model for Remanufacturing Systems", Master's Thesis, (Advisor: Dr. J. Li), Department of Manufacturing Engineering, University of Texas - Pan American, 2006.

Serrato Garcia

Serrato Garcia, M. A., "Outsourcing Analysis for Reverse Logistics Systems: A Qualitative Study and a Markov Decision Model", PhD Thesis, (Advisor: Dr. S. M. Ryan), Department of Industrial and Manufacturing Systems Engineering, Iowa State University, 2006.

Zhong

"A Research into the Recycling System of Waste Electrical and Electronic Equipment in China", Proceedings of the IEEE International Conference on Service Operations and Logistics, and Informatics (SOLI2006), Shanghai, China, pp. 705-710, June 21-23, 2006.

Sahin

"Examining Effects of Electronic Toll Collection Market Penetration at Bosporus Bridge Toll Plaza in Istanbul", Proceedings of the 85th Annual Meeting of the Transportation Research Board, (CD-ROM), Washington, D.C., January 22-26, 2006.

Paquette

Paquette, J. R., "The Supply Chain Response to Environmental Pressures", Master's Thesis, (Advisor: Dr. R. E. Kirchain), Engineering Systems division and the Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, February 2006.

Le Blanc

Le Blanc, H. M., "Closing Loops in Supply Chain Management: Designing Reverse Supply Chains for End-Of-Life Vehicles", PhD Thesis, (Advisors: Professors H. A. Fleuren and H. R. Krikke), University of Tilburg, The Netherlands, 2006.

Koh

"Parts Verification for Multi-Level-Dependent Demand Manufacturing Systems: A Recognition and Classification Structure", International Journal of Advanced Manufacturing Technology, Vol. 31, No. 3-4, 305-315, 2006.

Petrov

"A Multiple-Objective Optimization of Whey Fermentation in Stirred Tank Bioreactors", Bioautomation, Vol. 5, 39-48, 2006.

Parlikad

Parlikad, A. K., "The Impact of Product Information on the Effectiveness of Product Recovery Decisions", PhD Thesis, (Advisor: Professor Duncan McFarlane), Centre for Distributed Automation and Control, Manufacturing and Management Division, Department of Engineering, University of Cambridge, 2006.

Tian

"Vacation Queueing Models: Theory and Applications", Springer Science + Business Media, LLC, New York, NY, ISBN: 0-387-33721-0, 2006.

Kumar

Kumar, V., "A Material Flow and Economic Exchange Model to Characterize the Impact of Vehicular Changes and Policies on the Automotive Recovery Infrastructure", PhD Thesis, (Advisor: Dr. John W. Sutherland), Department of Mechanical Engineering, Michigan Technological University, Houghton, Michigan, USA, 2006.

Duta

Duta, L., "Contribution à l’étude de la Conduite des Systèmes de Désassemblage (in French)", PhD Thesis, (Advisors: Drs. J. M. Henrioud and Fl. Gh. Filip), l’Université de Bucarest and l’Université de Franche-Comté, Bucarest, September 22, 2006.

Arulmozhi

"Recursive Method to Calculate Reliability of (M, N) Systems with Service Facility and General Vacation for Repairman", Opsearch, Vol. 43, No. 3, 259-273, 2006.

Bakal

"Effects of Random Yield in Remanufacturing with Price-Sensitive Supply and Demand", Production and Operations Management, Vol. 15, No. 3, 407-420, 2006.

Tan

“Improved Methods for Process Routing in Enterprise Production Processes in Terms of Sustainable Development II”, Tsinghua Science and Technology, Vol. 11, No. 6, 693-700, 2006.

Yellepeddi

Yellepeddi, S. S., "A Methodology for Evaluating the Performance of Reverse Supply Chains in Consumer Electronics Industry", PhD Thesis, (Advisor: Dr. Donald H. Liles), Department of Industrial and Manufacturing Systems Engineering, University of Texas at Arlington, Texas, 2006.

Wongthatsanekorn

Wongthatsanekorn, W., "Strategic Network Growth with Recruitment Model", PhD Thesis, (Advisors: Dr. J. C. Ammons and Dr. M. J. Realff), Georgia Institute of Technology, May 2006.

Pornprasitpol

Pornprasitpol, P., "Selective Disassembly for Re-Use of Industrial Products", Master's Thesis, (Advisors: Drs. H. Kaebernick and S. Kara), School of Mechanical and Manufacturing Engineering, The University of South Wales, Sydney, NSW, Australia, July 2006.

Kara

“Selective Disassembly Sequencing: A Methodology for the Disassembly of End-Of-Life Products”, CIRP Annals, Vol. 55, No. 1, 37-40, 2006.

Mazhar

Mazhar, M. I., "Lifetime Monitoring of Appliances for Reuse", PhD Thesis, (Advisors: Drs. S. Kara and H. Kaebernick), School of Mechanical and Manufacturing Engineering, The University of South Wales, Sydney, NSW, Australia, June 2006.

Ibbotson

Ibbotson, S., "Analysing the Critical Design Parameters for Reuse", Master’s Thesis, (Advisors: Drs. S. Kara and H. Kaebernick), School of Mechanical and Manufacturing Engineering, The University of South Wales, Sydney, NSW, Australia, November 2006.

Ibbotson

"Clustering of Industrial Products for Reuse", Proceedings of the 5th Australian LCA Conference, Melbourne, Australia, pp. 1-10, November 22-24, 2006.

Ibbotson

"Remaining Life Estimations of Product Clusters for Reuse", Proceedings of the IV Global Conference on Sustainable Product Development and Life Cycle Engineering, Sao Paulo, Brazil, pp. 1-10, November 22-24, 2006.

Yan

Yan, B. W., "Evaluating Employee Responses to the Lean Enterprise System at a Manufacturing Company in Cape Town, South Africa", Master’s Thesis, (Advisor: Prof. Linda De Vries), University of the Western Cape, South Africa, May 2006.

Pan

Pan, X., "Computational Modeling of Human and Social Behaviors for Emergency Egress Analysis", PhD Thesis, (Advisor: Dr. K. H. Law), Department of Civil and Environmental Engineering, Stanford University, June 2006.

You

"Supply Chain Configuration Modeling Based on Colored Petri-Nets", Proceedings of the 2006 IEEE International Conference on Management of Innovation and Technology (ICMIT06), Volume 2, 921–925, June 2006.

Chang

"Nondestructive Disassembly System for White Board Marker", Materials Science Forum, Vol. 505-507, pp. 955-960, 2006.

Houe Ngouna

Houe Ngouna, R., "Modelling Normative Knowledge for the Recyclability Assessment of a Product during its Design Stage: from Norms to Constraints (in French)", PhD Thesis, (Advisor: Dr. B. Grabot), National Engineers School of Tarbes, France, 2006.

Del Brio Gonzalez

"Regulación Medioambiental Preventiva y Estrategia de Producción en las Empresas Recuperadoras de Automóviles.Un Análisis de Casos (in Spanish)", Cuadernos de Economía y Dirección de la Empresa, Vol. 27, 9-32, 2006.

Hendrickson

"Environmental Life Cycle Assessment of Goods and Services: An Input-Output Approach", RFF Press, Washington, DC, ISBN: 1-933115-23-8, 2006.

Ruiz-Hernandez

Ruiz-Hernandez, D., "Essays on Indexability of Stochastic Scheduling and Dynamic Allocation Problems", PhD Thesis, (Advisor: Prof. K. D. Glazebrook), Universitat Pompeu Fabra, Barcelona, Spain, 2006.

Leung

“An Efficient Algorithm for Multi-Hoist Cyclic Scheduling with Fixed Processing Times”, Operations Research Letters, Vol. 34, No. 4, 465-472, 2006.

Kojima

“An Integrated Production Planning Problem for a Multi-State Production System Using Kanban”, Industrial Engineering and Management Systems, Vol. 5, No. 1, 11-22, 2006.

Lu

"Model-Based Analysis of Capacity and Service Fees for Electronics Recyclers", Journal of Manufacturing Systems, Vol. 25, No. 1, 45-57, 2006.

Jeon

"A Two-Stage Heuristic for Disassembly Scheduling with Capacity Constraints", International Journal of Management Science, Vol. 12, No. 1, 95-112, 2006.

Fochler

Fochler, K., "Computer Integrated Business: Theoretische und empirische Analyse der bisherigen Ansätze und zukünftigen Perspektiven (in German)", PhD Thesis, University of Kassel, 2006.

Panousopoulou

"Reverse Logistics through Recycling: A Case Study from the Brewery Sector", Proceedings of the 2006 Naxos International Conference on Sustainable Management and Development of Mountainous and Island Areas, Island of Naxos, Greece, Volume 2, pp. 1–10, September 29 - October 1, 2006.

Morandin, Jr.

"A Modeling Strategy of Shop-Floor Interlocking and Controlling using Virtual Petri Nets and Production Simulation", Proceedings of the 2006 IEEE International Conference on Systems, Man, and Cybernetics, Taipei, Taiwan, October 8-11, pp. 4084-4089, 2006.

Hao

"An Agent-Based Simulation of A JIT Material Handling System", in IFIP International Federation for Information Processing, Volume 220, Information Technology For Balanced Manufacturing Systems, Edited by W. Shen, Springer, Boston, Chapter 8, 67-78, ISBN: 978-0-387-36590-9, 2006.

Pomares

"Multi-Sensorial System for the Generation of Disassembly Trajectories", Proceedings of the 2006 World Automation Congress, (CD-ROM), Budapest, Hungary, July 24-26, 2006.

Patel

"Reverse Logistics: Problems, Framework, Models, and Applications", Proceedings of the 2006 Institute of Industrial Engineering Research Conference, Orlando, Florida, May 20-24, 2006 (CD-ROM).

Giard

"Production à flux tirés dans une chaîne logistique (Production with Pull Systems in a Logistic Chain)", (in French),Logistique & Management, Vol 14, No. 2, 15-28, 2006.

Zhang

"Fuzzy Preference Based Interactive Fuzzy Physical Programming and Its Application in Multi-objective Optimization", Journal of Mechanical Science and Technology, Vol 20, No. 6, 731-737, 2006.

Schmuker

Schmuker, M. J., "Transformation of a Complex Production Line Used in a Plastic Product Fabrication into a Lean Manufacturing System", Master’s Thesis, (Advisor: Dr. M. Ozbayrak), School of Engineering and Design, Brunel University, London, U.K., December 2006.

Chao

"Analysis and Computational Algorithm for Queues with State-Dependent Vacations I: G/M(n)/1/K", Journal of Systems Science and Complexity, Vol. 19, No. 1, 36-53, 2006.

Lopes

"A Maintenance Float System with Periodic Overhauls", Proceedings of the European Safety and Reliability Conference 2006 (ESREL 2006) - Safety and Reliability for Managing Risk, Estoril, Portugal, pp. 613-618, September 18-22, 2006.

de Nitto Persone

“Efficient Model-Driven Service Management in Mobile Systems”, WSEAS Transactions on Computers, Vol. 5, No. 9, 2056-2062, 2006.

Coulton

Coulton, Stuart John, "The WEEE Directive and its Effect on Global Markets", Master’s Thesis, (Advisor: Dr Luc Muyldermans), Business School, University of Nottingham, 2006.

Huang

Huang, P.-C., "A Set-Based Concurrent Engineering Approach for Environment-Conscious Product Design", Master’s Thesis, (Advisor: Prof. H.-P. Kao), National Central University, Jhongli City, Taiwan, 2006.

Azeem

Azeem, M. A., "Microstructure and Texture Evolution and its Effect on Mechanical Properties in Dilute Magnesuim Based AZ21 Alloy", Master’s Thesis, (Advisor: Prof. U. Ramamurty), Department of Metallurgy, Indian Institute of Science, Bangalore, India, 2006.

Zha

"A Novel Genetic Fuzzy/Knowledge Petri Net Model and Its Applications", in Applied Soft Computing Technologies: The Challenge of Complexity, Edited by Ajith Abraham, Bernard de Baets, Mario Koppen, and Bertram Nickolay, Springer Berlin/Heidelberg, pp. 795-804, ISBN: 978-3-540-31649-7, 2006.

Serrato

"Characterization of Reverse Logistics Networks for Outsourcing", in Reverse Logistics: Concepts and Cases, Edited by Sashikala Parimi and Mita Devi, Hyderabad: ICFAI Press, Chapter 9, ISBN: 81-7881-789-6, 2006.

Imtanavanich

"Solving a Disassembly-to-Order Problem using Neural Networks", Proceedings of the Seventh International Conference on EcoBalance, Tsubuka, Japan, pp. 631-634, November 14-16, 2006.

Nobari

"Developing Human Resource Strategy for Complex Supply Chains", in Complexity Management in Supply Chains: Concepts, Tools and Methods, Edited by Thorsten Blecker and Wolfgang Kersten, Eric Schmidt Verlag GmbH & Co., Berlin, pp. 313-324, ISBN: 3-503-09737-6, 2006.

Ozel

Ozel, O. I., "Analysis of a Pull Type Remanufacturing Control System", Master's Thesis, (Advisor: Dr. A. Korugan), Department of Industrial Engineering, Bogazici University, Istanbul, Turkey, 2006.

Lyn

Lyn, L. L., "Product Disassembly Planning using Design for Disassembly and Genetic Algorithm", Master's Thesis, (Advisor: Prof. R. Daud), Center for Graduate Studies, Universiti Utara Malaysia, 2006.

Rahman

"KANBAN Applied to Reduce WIP in Chipper Assembly for Lawn Mower Industries", Proceedings of the 19th International Congress on Condition Monitoring and Diagnostic Engineering Management, Sweden, Lulea, June 12-15, 2006.

Jingbo

"The Coordinate Study of Reverse Logistics and Green Supply Chain", Proceedings of the 2006 International Conference on Management of Logistics and Supply Chain, Chang Sha, China, September 20-22, 2006.

Lambert

"Optimizing Disassembly Processes Subjected to Sequence-Dependent Cost", Computers and Operations Research, Vol. 34, No. 2, 536-551, 2007.

Langella

"Heuristics for Demand-Driven Disassembly Planning", Computers and Operations Research, Vol. 34, No. 2, 552-577, 2007.

Paul

"A Heuristic Scheduling Procedure for Multi-Item Hoist Production Lines", International Journal of Production Economics, Vol. 105, No. 1, 54-69, 2007.

Das

"Reliability Consideration in the Design and Analysis of Cellular Manufacturing Systems", International Journal of Production Economics, Vol. 105, No. 1, 243-262, 2007.

Williams

"An Automotive Bulk Recycling Planning Model", European Journal of Operational Research, Vol. 177, No. 2, 969-981, 2007.

Tsai

"A Case-Based Reasoning System for PCB Principal Process Parameter Identification", Expert Systems with Applications, Vol. 32, No. 4, 1183-1193, 2007.

Haque

"A Survey of the Machine Interference Problem", European Journal of Operational Research, Vol. 179, No. 2, 469-482, 2007.

McGovern

"A Balancing Method and Genetic Algorithm for Disassembly Line Balancing", European Journal of Operational Research, Vol. 179, No. 3, 692-708, 2007.

Salema

"An Optimization Model for the Design of a Capacitated Multi-Product Reverse Logistics Network with Uncertainty", European Journal of Operational Research, Vol. 179, No. 3, 1063-1077, 2007.

Kara

"Simulation Modelling of Reverse Logistics Networks", International Journal of Production Economics, Vol. 106, No. 1, 61-69, 2007.

Ke

"Vacation Policies for Machine Repair Problem with Two Type Spares", Applied Mathematical Modelling, Vol. 31, No. 5, 880-894, 2007.

Koh

"Tackling Uncertainty in ERP-Controlled Manufacturing Environment: A Knowledge Management Approach", International Journal of Advanced Manufacturing Technology, Vol. 31, No. 7-8, 833-840, 2007.

Meade

"The Theory and Practice of Reverse Logistics", International Journal of Logistics Systems and Management, Vol. 3, No. 1, 56-84, 2007.

Li

"Application of Corona Discharge and Electrostatic Force to Separate Metals and Nonmetals from Crushed Particles of Waste Printed Circuit Boards", Journal of Electrostatics, Vol. 65, No. 4, 233-238, 2007.

Tseng

"Using Memetic Algorithms with Guided Local Search to Solve Assembly Sequence Planning", Expert Systems with Applications, Vol. 33, No. 2, 451-467, 2007.

Ho

"Optimal Production Planning for PCB Assembly", Springer-Verlag, London, ISBN: 1-84628-499-6, 2007.

Schroeder

"Operations Management: Contemporary Concepts and Cases with Student CD-ROM", (Chapter 17), 3rd Edition, McGraw-Hill/Irwin, New York, 2007.

Tang

"Adaptive Fuzzy System for Disassembly Process Planning with Uncertainty", Journal of the Chinese Institute of Industrial Engineers, Vol. 24, No. 1, 20-29, 2007.

Srivastava

"Green Supply-Chain Management: A State-of-the-Art Literature Review", International Journal of Management Reviews, Vol. 9, No. 1, 53-80, 2007.

Johar

"Inventory Balancing of Post-usage Components of a Disassembly Line", Proceedings of the 2007 Northeast Decision Sciences Institute Conference, Baltimore, Maryland, pp. 456-461, March 28-March 30, 2007.

Imtanavanich

"Generating a Disassembly-To-Order Plan", Proceedings of the 2007 Northeast Decision Sciences Institute Conference, Baltimore, Maryland, pp. 462-467, March 28-March 30, 2007.

Vadde

"Disposal Decisions Under Predetermined Pricing Policies", Proceedings of the 2007 Northeast Decision Sciences Institute Conference, Baltimore, Maryland, pp. 468-473, March 28-March 30, 2007.

Nukala

"Performance Measurement in a Closed-Loop Supply Chain Network", Proceedings of the 2007 Northeast Decision Sciences Institute Conference, Baltimore, Maryland, pp. 474-479, March 28-March 30, 2007.

Nukala

"Supplier Selection in a Closed-Loop Supply Chain Network", Proceedings of the 2007 Northeast Decision Sciences Institute Conference, Baltimore, Maryland, pp. 742-747, March 28-March 30, 2007.

Seitz

"A Critical Assessment of Motives for Product Recovery: The Case of Engine Remanufacturing", Journal of Cleaner Production, Vol. 15, No. 11-12, 1147-1157, 2007.

Lopes

"State Probabilities of a Float System", Journal of Quality in Maintenance Engineering, Vol. 13, No. 1, 88-102, 2007.

Li

"Recycle Technology for Recovering Resources and Products from Waste Printed Circuit Boards", Environmental Science and Technology, Vol. 41, No. 6, 1995-2000, 2007.

Samanta

"Analysis of Finite Capacity Discrete-Time GI/Geo/1 Queueing System with Multiple Vacations", Journal of Operational Research Society, Vol. 58, No. 3, 368-377, 2007.

Duman

"Modelling the Operations of a Component Placement Machine with Rotational Turret and Stationary Component Magazine", Journal of Operational Research Society, Vol. 58, No. 3, 317-325, 2007.

Vachon

"Supply Chain Management and Environmental Technologies: The Role of Integration", International Journal of Production Research, Vol. 45, No. 2, 401-423, 2007.

Reveliotis

"Uncertainty Management in Optimal Disassembly Planning Through Learning-Based Strategies", IIE Transactions, Vol. 39, No. 6, 645-658, 2007.

Wang

"Application of TOPSIS in Evaluating Initial Training Aircraft Under a Fuzzy Environment", Expert Systems with Applications, Vol. 33, No. 4, 870-880, 2007.

Mohebbi

"Capacity-Driven vs. Demand-Driven Material Procurement Systems", International Journal of Production Economics, Vol. 107, No. 2, 451-466, 2007.

McGovern

Book Review of "Disassembly Modeling for Assembly, Maintenance, Reuse, and Recycling" by Lambert, A. J. D. and Gupta, S. M., Management Research News, Vol. 30, No. 4, 314-316, 2007.

Banik

“On the GI/M/1/N Queue with Multiple Working Vacations—Analytic Analysis and Computation”, Applied Mathematical Modelling, Vol. 31, No. 9, 1701-1710, 2007.

Altiparmak

“Buffer Allocation and Performance Modeling in Asynchronous Assembly System Operations: An Artificial Neural Network Metamodeling Approach”, Applied Soft Computing, Vol. 7, No. 3, 946-956, 2007.

Johar

"Inventory Balancing in Disassembly Line: A Multiperiod Problem", Proceedings of the 2007 POMS-Dallas Meeting, Dallas, Texas, May 4-May 7, 2007 (CD-ROM).

Imtanavanich

"Generating Disassembly Sequences for Multiple Products Using Genetic Algorithm", Proceedings of the 2007 POMS-Dallas Meeting, Dallas, Texas, May 4-May 7, 2007 (CD-ROM).

Vadde

"Competition to Acquire and Sell Between Two Product Recovery Facilities", Proceedings of the 2007 POMS-Dallas Meeting, Dallas, Texas, May 4-May 7, 2007 (CD-ROM).

Mahadevan

"A Survey Based Framework for Recovery and Re-manufacturing Issues of Orphan Products", Proceedings of the 2007 POMS-Dallas Meeting, Dallas, Texas, May 4-May 7, 2007 (CD-ROM).

Imtanavanich

"Generating a Complete Disassembly-To-Order Plan", Proceedings of the International IFAC Conference on Intelligent Assembly and Disassembly (IAD’07), Alicante, Spain, pp. 28-33, May 23-25, 2007.

McGovern

"Benchmark Data Set for Evaluation of Line Balancing Algorithms", Proceedings of the International IFAC Conference on Intelligent Assembly and Disassembly (IAD’07), Alicante, Spain, pp. 54-59, May 23-25, 2007.

Duta

"Disassembly Scheduling Using Stochastic Algorithms", Proceedings of the International IFAC Conference on Intelligent Assembly and Disassembly (IAD’07), Alicante, Spain, pp. 40-45, May 23-25, 2007.

Lambert

"A Heuristic for Assembly and Disassembly Line Balancing", Proceedings of the International IFAC Conference on Intelligent Assembly and Disassembly (IAD’07), Alicante, Spain, pp. 75-80, May 23-25, 2007.

Mital

“A Structured Approach to New Product Design, Development and Manufacture Part II: Putting the Product Together (Assembly) and Disposal (Disassembly)”, International Journal of Industrial Engineering, Vol. 14, No. 1, 23-32, 2007.

Kazmierczak

“A Case Study of Serial-Flow Car Disassembly: Ergonomics, Productivity and Potential System Performance”, Human Factors and Ergonomics in Manufacturing, Vol. 17, No. 4, 331-351, 2007.

Adenso-Diaz

“An Efficient GRASP Algorithm for Disassembly Sequence Planning”, OR Spectrum, Vol. 29, No. 3, 535-549, 2007.

Che

“Cyclic Hoist Scheduling in Large Real-Life Electroplating Lines”, OR Spectrum, Vol. 29, No. 3, 445-470, 2007.

Yuksel

"Recycling of Electrical and Electronic Equipment, Benchmarking of Disassembly Methods and Cost Analysis", Proceedings of the 2007 IEEE International Symposium on Electronics and the Environment, Orlando, Florida, pp. 222-226, May 7-10, 2007.

Lee

“Evaluating Artificial Intelligence Heuristics for a Flexible Kanban System: Simultaneous Kanban Controlling and Scheduling”, International Journal of Production Research, Vol. 45, No. 13, 2859-2873, 2007.

Langella

Langella, I. M., "Planning Demand-Driven Disassembly for Remanufacturing", PhD Thesis, (Advisor: Dr. K. Inderfurth), Faculty of Economics and Management, Otto-von-Guericke University, Magdeburg, 2007.

Jayaraman

“Creating Competitive Advantages Through New Value Creation: A Reverse Logistics Perspective”, Academy of Management Perspectives, Vol. 21, No. 2, 56-73, 2007.

Boysen

“A Classification of Assembly Line Balancing Problems”, European Journal of Operational Research, Vol. 183, No. 2, 674-693, 2007.

Tang

“Planned Lead Time Determination in a Make-To-Order Remanufacturing System”, International Journal of Production Economics, Vol. 108, No. 1-2, 426-435, 2007.

Ivanov

“Intelligent Planning and Control of Manufacturing Supply Chains in Virtual Enterprises”, International Journal of Manufacturing Technology and Management (IJMTM), Vol. 11, No. 2, 209-227, 2007.

Fixson

“Modularity and Commonality Research: Past Developments and Future Opportunities”, Concurrent Engineering: Research and Applications, Vol. 15, No. 2, 85-111, 2007.

Shih

“Optimizing Disassembly and Recycling Process for EOL LCD-Type Products: A Heuristic Method”, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 30, No. 3, 213-220, 2007.

Sarmiento

“Delivery Reliability, Manufacturing Capabilities and New Models of Manufacturing Efficiency”, Journal of Manufacturing Technology Management, Vol. 18, No. 4, 367-386, 2007.

Joshi

Joshi, N. A., "Methodologies for Improving Product Development Phases through PLM", PhD Thesis, (Advisor: Dr. D. Dutta), Department of Mechanical Engineering, University of Michigan, 2007.

Pochampally

“Approaches for Strategic Planning of a Reverse Supply Chain”, Office Automation: Journal of the Japan Society for the Study of Office Automation, Vol. 27, No. 4, 75-82, 2007.

Nukala

Nukala, S., "Multi-Criteria Decision Making Models for Strategic Planning of Closed-Loop Supply Chains", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical and Industrial Engineering, Northeastern University, 2007.

Spasova

Spasova, P., "Decision-Making at Operational Level", Undergraduate Thesis, (Advisors: J. Bruch and M. Winroth), Department of Industrial Engineering and Management, Jonkoping University, Sweden, 2007.

Dong

“Disassembly Sequence Generation in Recycling Based on Parts Accessibility and End-Of-Life Strategy”, Journal of Engineering Manufacture, Vol. 221, No. B6, 1079-1085, 2007.

Mitra

"Analysis of a Two-Echelon Inventory System with Returns", Research Paper (WP No. 611), Indian Institute of Management Calcutta, India, 2007.

Talbot

“Closed-Loop Supply Chain Activities and Derived Benefits in Manufacturing SMEs”, Journal of Manufacturing Technology Management, Vol. 18, No. 6, 627-658, 2007.

Mollenkopf

“The Returns Management Process in Supply Chain Strategy”, International Journal of Physical Distribution and Logistics Management, Vol. 37, No. 7, 568-592, 2007.

Nimse

“A Review of Green Product Databases”, Environmental Progress, Vol. 26, No. 2, 131-137, 2007.

Mahl

Mahl, M. and Ostlin, J., "Lean Remanufacturing – Material Flows at Volvo Parts Flen", Master's Thesis, (Advisor: R. Joachimsson), Department of Business Studies, Uppsala University, Sweden, 2007.

Kaku

"Disassembly Sequencing Flexibility - A Joint Cellular Disassembly Model", Proceedings of the 19th International Conference on Production Research (ICPR-19), Valparaiso, Chile, July 29 - August 2, 2007 (CD-ROM).

Kouri

"The Principles and Planning Process of an Electronic Kanban System", Proceedings of the 19th International Conference on Production Research (ICPR-19), Valparaiso, Chile, July 29 - August 2, 2007 (CD-ROM).

Ates

"Sensitivity Analysis of Hybrid Production Systems with Two Part Types Having Operational and Quality Failures", Proceedings of the 19th International Conference on Production Research (ICPR-19), Valparaiso, Chile, July 29 - August 2, 2007 (CD-ROM).

Cardos

"An Heuristic Planning Algorithm for the Discrete Manufacturing Industry with Reverse BOM and Alternative Structures", Proceedings of the 19th International Conference on Production Research (ICPR-19), Valparaiso, Chile, July 29 - August 2, 2007 (CD-ROM).

Rao

"Decision Making in the Manufacturing Environment: Using Graph Theory and Fuzzy Multiple Attribute Decision Making Methods", Springer-Verlag, London, ISBN: 978-1846288180, 2007.

Liu

“Angle Deficit Approximation of Gaussian Curvature and its Convergence Over Quadrilateral Meshes”, Computer-Aided Design, Vol. 39, No. 6, 506-517, 2007.

Tumkor

"Disassembly Precedence Graph Generation", Proceedings of the 2007 IEEE International Symposium on Assembly and Manufacturing (ISAM2007), Ann Arbor, Michigan, USA, 70-75, July 22-25, 2007.

Imtanavanich

Imtanavanich, P., "Disassembly-To-Order System", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical and Industrial Engineering, Northeastern University, 2007.

Vadde

Vadde, S., "Pricing and Disposal Decision Models for Product Recovery Facilities", PhD Thesis, (Advisors: Dr. S. V. Kamarthi and Dr. S. M. Gupta), Department of Mechanical and Industrial Engineering, Northeastern University, 2007.

Zhifeng

"Disassembly for End-Of-Life Electromechanical Products", in Environmentally Conscious Manufacturing, Edited by Myer Kutz, John Wiley and Sons, Inc., Hoboken, New Jersey, Chapter 9, 211-263, ISBN: 978-0-471-72637-1, 2007.

Andres

“Disassembly Sequence Planning in a Disassembly Cell Context”, Robotics and Computer-Integrated Manufacturing, Vol. 23, No. 6, 690-695, 2007.

del Brio

“Customer Interaction in Environmental Innovation: The Case of Cloth Diaper Laundering”, Service Business, Vol. 1, No. 2, 141-158, 2007.

Jeong

“The Cost Valuation Model for Reverse Supply Chain using System Dynamics”, in Systems Modeling and Simulation: Theory and Applications, Asia Simulation Conference 2006, edited by K. Koyamada, S. Tamura and O. Ono, Tokyo; Springer, pp. 173-177, 2007.

Thompson

Thompson, S. C., "Material Design vs Material Selection: A Trade-Off between Design Freedom and Design Simplicity", PhD Thesis, (Advisor: Dr. F. Mistree), Department of Mechanical Engineering, Georgia Institute of Technology, 2007.

Giudice

“Disassembly Planning of Mechanical Systems for Service and Recovery: A Genetic Algorithms Based Approach”, Journal of Intelligent Manufacturing, Vol. 18, No. 3, 313-329, 2007.

Osorio

"A Finite Capacity Queueing Network Model Capturing Blocking, Congestion and Spillbacks", Proceedings of the Sixth Triennial Symposium on Transportation Analysis (TRISTAN VI), Phuket, Thailand, June 10-15, 2007.

Babu

“Electrical and Electronic Waste: A Global Environmental Problem”, Waste Management and Research, Vol. 25, No. 4, 307-318, 2007.

Lopes

Lopes, I. S., "Técnicas Quantitativas no Apoio à Decisão em Sistemas de Manutenção (in Portuguese)", PhD Thesis, (Advisors: A. L. F. Leitao and G. A. B. Pereira), University of Minho, Braga, Portugal, 2007.

Zwolinski

"Definition of a VR Tool for the Early Design Stage of the Product Structure under Consideration of Disassembly", in Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses (Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11-13, 2007), Edited by S. Takata and Y. Umeda, Spinger-Verlag London, pp. 71-76, ISBN: 978-1-84628-934-7, 2007.

Wang

"Product Disassembly Model Based on Hierarchy Network Graph", in Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses (Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11-13, 2007), Edited by S. Takata and Y. Umeda, Spinger-Verlag London, pp. 267-272, ISBN: 978-1-84628-934-7, 2007.

Kang

"A Product Lifecycle Costing System with Imprecise End-of-Life Data", in Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses (Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11-13, 2007), Edited by S. Takata and Y. Umeda, Spinger-Verlag London, pp. 467-472, ISBN: 978-1-84628-934-7, 2007.

McGovern

“Combinatorial Optimization Analysis of the Unary NP-Complete Disassembly Line Balancing Problem”, International Journal of Production Research, Vol. 45, No. 18-19, 4485-4511, 2007.

Vadde

“Optimal Pricing of Reusable and Recyclable Components under Alternative Product Acquisition Mechanisms”, International Journal of Production Research, Vol. 45, No. 18-19, 4621-4652, 2007.

Mouzon

“Operational Methods for Minimization of Energy Consumption of Manufacturing Equipment”, International Journal of Production Research, Vol. 45, No. 18-19, 4247-4271, 2007.

Staikos

“A Decision-Making Model for Waste Management in the Footwear Industry”, International Journal of Production Research, Vol. 45, No. 18-19, 4403-4422, 2007.

Kim

“Disassembly Scheduling: Literature Review and Future Research Directions”, International Journal of Production Research, Vol. 45, No. 18-19, 4465-4484, 2007.

Shimizu

“Optimal Disassembly Sequence Generation Using a Genetic Programming”, International Journal of Production Research, Vol. 45, No. 18-19, 4537-4554, 2007.

Kumar

“Value Flow Characterization During Product Lifecycle to Assist in Recovery Decisions”, International Journal of Production Research, Vol. 45, No. 18-19, 4555-4572, 2007.

DePuy

“Production Planning for Remanufactured Products”, Production Planning and Control, Vol. 18, No. 7, 573-583, 2007.

Parlikad

“RFID-Based Product Information in End-Of-Life Decision Making”, Control Engineering Practice, Vol. 15, No. 11, 1348-1363, 2007.

Koh

"The Effects of Uncetainty on ERP-Controlled Manufacturing Supply Chains", in Modelling and Analysis of Enterprise Information Systems, Edited by A. Gunasekaran, Idea Group Inc. Publishing, Hershey, Pennsylvania, Chapter 3, 63-86, ISBN: 978-1599044774, 2007.

de Silva Garza

“Promoting Productivity in Manufacturing Companies in Developing Countries: An Information System for Managing and Querying Knowledge Bases in the Automotive Industry in Mexico”, Information Technology for Development, Vol. 13, No. 3, 253-268, 2007.

Linton

“Sustainable Supply Chains: An Introduction”, Journal of Operations Management, Vol. 25, No. 6, 1075-1082, 2007.

Tuncel

“Applications of Petri Nets in Production Scheduling: A Review”, International Journal of Advanced Manufacturing Technology, Vol. 34, No. 7-8, 762-773, 2007.

Coates

“Assessing the Economics of Pre-Fragmentation Material Recovery within the UK”, Resources, Conservation and Recycling, Vol. 52, No. 2, 286-302, 2007.

Jun

“Research Issues on Closed-Loop PLM”, Computers in Industry, Vol. 58, No. 8-9, 855-868, 2007.

Osorio

"Describing Network Congestion with an Analytic Queueing Network Model", Proceedings of the Swiss Transport Research Conference, Ascona, Switzerland, September 12-14, 2007.

Schultmann

“Energy-Oriented Deconstruction and Recovery Planning”, Building Research and Information, Vol. 35, No. 6, 602-615, 2007.

Glickman

“Safety at the Source: Green Chemistry’s Impact on Supply Chain Management and Risk”, International. Journal of Procurement Management, Vol. 1, No. 1-2, 227-237, 2007.

Gil

“Flexible Multi-Sensorial System for Automatic Disassembly Using Cooperative Robots”, International Journal of Computer Integrated Manufacturing, Vol. 20, No. 8, 757-772, 2007.

Williams

“A Review of Research Towards Computer Integrated Demanufacturing for Materials Recovery”, International Journal of Computer Integrated Manufacturing, Vol. 20, No. 8, 773-780, 2007.

Wang

“Optimal Control of an M/G/1/K Queueing System with Combined F Policy and Startup Time”, Journal of Optimization Theory and Applications, Vol. 135, No. 2, 285-299, 2007.

Rangavajhala

“The Challenge of Equality Constraints in Robust Design Optimization: Examination and New Approach”, Structural and Multidisciplinary Optimization, Vol. 34, No. 5, 381-401, 2007.

Gumus

“Multi-Echelon Inventory Management in Supply Chains with Uncertain Demand and Lead Times: Literature Review from an Operational Research Perspective”, Journal of Engineering Manufacture, Vol. 221, No. B10, 1553-1570, 2007.

Johar

"Inventory Control and Value Management of EOL Products in a Disassembly Line", Proceedings of the Eighth International Conference on Operations and Quantitative Management, Bangkok, Thailand, pp. 708-711, October 17-20, 2007.

Jun

“Product Life-Cycle Metadata Modeling and Its Application with RDF”, IEEE Transactions on Knowledge and Data Engineering, Vol. 19, No. 12, 1680-1693, 2007.

Xinhua

"Improved MMAS for Multi-Process Routes Decision-Making", Proceedings of the 2nd IEEE Conference on Industrial Electronics and Applications (ICIEA2007), Harbin, China, pp. 1426-1430, May 23-25, 2007.

Kotani

“Optimal Method for Changing the Number of Kanbans in the e-Kanban System and its Applications”, International Journal of Production Research, Vol. 45, No. 24, 5789-5809, 2007.

Johar

"Inventory Control Policies of Recoverable EOL Products on a Disassembly Line", Proceedings of the 5th International Logistics and Supply Chain Congress, Istanbul, Turkey, pp. 584-587, November 8-9, 2007.

Udomsawat

Udomsawat, G., "Multi-Kanban Modeling for Disassembly", PhD Thesis, (Advisor: Dr. S. M. Gupta), Department of Mechanical and Industrial Engineering, Northeastern University, November 2007.

Hebalkar

Hebalkar, T., "Re-Architecting the Failure Analysis Supply Chain", Master's Thesis, (Advisors: Drs. D. J. Nightingale and S. Beckman), Sloan School of Management and Engineering Systems Division, Massachusetts Institute of Technology, June 2007.

Nnorom

“Achieving Resource Conservation in Electronic Waste Management: A Review of Options Available to Developing Countries”, Journal of Applied Sciences, Vol. 7, No. 20, 2918-2933, 2007.

Cappelli

“Design for Disassembly: A Methodology for Identifying the Optimal Disassembly Sequence”, Journal of Engineering Design, Vol. 18, No. 6, 563-575, 2007.

Osibanjo

“The Challenge of Electronic Waste (e-waste) Management in Developing Countries”, Waste Management and Research, Vol. 25, No. 6, 489-501, 2007.

Duta

"A Real Time Solution to Control Disassembly Processes", Proceedings of the 4th IFAC Conference on Management and Control of Production and Logistics, (MCPL'2007), Sibiu, Romania, September 27- 30, 2007 (CD-ROM).

Kan

"The Analysis of Signaling Game in Reverse Supply Chain", Proceedings of the IEEE International Conference on Automation and Logistics (ICAL2007), Jinan, China, August 18 - 21, pp. 1162-1166, 2007.

Dolgui

“Supply Planning Under Uncertainties in MRP Environments: A State of the Art”, Annual Reviews in Control, Vol. 31, No. 2, 269-279, 2007.

Liu

"Assembly Planning and Assembly Sequences Combination Using Assembly Feature Interference", Proceedings of the 10th IEEE International Conference on Computer-Aided Design and Computer Graphics (CAD/Graphics 2007), Beijing, China, pp. 545-548, October 15-18, 2007.

Zhou

Zhou, X., "Life Cycle Thinking and Assessment Tools on Environmentally-Benign Electronics: Convergent Optimization of Materials Use, End-Of-Life Strategy and Environmental Policies", PhD Thesis, (Advisor: Dr. J. M. Schoenung), Department of Materials Science and Engineering, University of California, Davis, 2007.

Ciegis

"Imones transformavimo i darnia imone procesas (Strategic Management Process of Business Transformation into Sustainable Business)", Management of Organizations: Systematic Research, (in Estonian), No. 44, 19-34, 2007.

Seshadri

Seshadri, S., "Dynamically Adjusting the Number of Kanbans for Demand Fluctuations and Stochastic Process Times", Master's Thesis, (Advisor: Dr. N. Nagarur), Department of Industrial and Systems Engineering, State University of New York at Binghamton, 2007.

Ding

"Intelligent Planning of Manufacturing Systems with Hybrid Dynamics", Proceedings of the IFAC Workshop on Manufacturing Modelling, Management and Control (MIM’07), Budapest, Hungary, pp. 181-186, November 14-16, 2007.

Dahmus

“What Gets Recycled: An Information Theory Based Model for Product Recycling”, Environmental Science and Technology, Vol. 41, No. 21, 7543-7550, 2007.

Shalaby

"Design for Disassembly with High-Stiffness, Heat-Reversible Locator-Snap Systems", Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2007), Paper No. DETC2007-35804, Las Vegas, Nevada, USA, September 4-7, 2007.

Sharma

“Credit Union Portfolio Management: An Application of Goal Interval Programming”, Academy of Banking Studies Journal, Vol. 6, No. 1, 39-60, 2007.

Aramyan

Aramyan, L. H., "Measuring Supply Chain Performance in the Agri-Food Sector", PhD Thesis, (Advisor: Dr. A. G. J. M. Oude Lansink), Wageningen University, The Netherlands, 2007.

Messac

"Multiobjective Optimization: Concepts and Methods", in Optimization of Structural and Mechanical Systems, Edited by J. S. Arora, World Scientific, pp. 121-147, Chapter 4, ISBN: 978-981-256-962-2, 2007.

Betancourt

Betancourt, L. C., "ASALBP: The Alternative Subgraphs Assembly Line Balancing Problem. Formalization and Resolution Procedures", PhD Thesis, (Advisor: Dr. R. P. Moreno), Institute of Industrial and Control Engineering, Technical University of Catalonia, Barcelona, Spain, 2007.

Xinhua

"Integration of CAPP and CAFD Based on Agent Technology", Proceedings of 4th IEEE International Conference on Mechatronics (ICM2007), Kumamoto, Japan, pp. 1-4, May 8-10, 2007.

Gupta

Gupta, A., "Optimization Modeling for the Operation of Closed-Loop Supply Chains", PhD Thesis, (Advisor: Dr. G. W. Evans), Department of Industrial Engineering, University of Louisville, Louisville, Kentucky, 2007.

Morandin, Jr.

"A Modeling Strategy for Control and Interlocking of an AMS using Virtual Petri Nets", Proceedings of the 2007 IEEE International Conference on Systems, Man, and Cybernetics, Montreal, Quebec, Canada, October 7-10, pp. 3493-3498, 2007.

Engau

“2D Decision-Making for Multicriteria Design Optimization”, Structural and Multidisciplinary Optimization, Vol. 34, No. 4, 301-315, 2007.

Giribone

“Tools and Techniques for Supporting Reverse Logistics Optimization: Methodology, Case Study and Project Proposal”, International Journal of Education and Information Technologies, Vol. 1, No. 4, 223-232, 2007.

Malladi

Malladi, S., "A Manufacturer-Service Provider Model with Remanufacturability and Variable Product Llife Considerations", PhD Thesis, (Advisor: Professor J. Min), Department of Industrial Engineering, Iowa State University, Ames, Iowa, 2007.

Daraba

"Remanufacturing: Opportunities and Barriers", Proceedings of the 7th International Multidisciplinary Conference, Baia Mare, Romania, pp. 165-170, May 17-18, 2007.

Lage Jr.

Lage Jr., M., "Evolution and Evaluation of the Use of Kanban System and its Adaptations: Survey and Case Studies (in Portuguese)", Master's Thesis, (Advisor: Professor Moacir Godinho Filho), Department of Production Engineering, University of San Carlos, Brazil, 2007.

Coates

Coates, G., "A Costing Framework to Support Sustainable Approach to End-of-Life Vehicle Recovery", PhD Thesis, (Advisor: Dr. S. Rahimifard), Loughborough University, Leicestershire, UK, 2007.

Krones

Krones, J. S., "Reverse Logistics and Large-Scale Material Recovery from Electronics Waste", Undergraduate Thesis, (Advisor: Dr. R. E. Kirchain), Department of Materials Science and Engineering, Massachusetts Institute of Technology, September 2007.

Giribone

"Integrate Clustering and Mathematical Programming for Supporting Reverse Logistics Optimization: Methodology and Case Study", Proceedings of the 6th WSEAS International Conference on System Science and Simulation in Engineering (ICOSSSE '07), Venice, Italy, pp. 30-37, November 21-23, 2007.

Hnaien

"Optimal Order Release for Multilevel Assembly Systems Under Random Lead Times and Constant Demand", Proceedings of the 19th International Conference on Production Research (ICPR-19), Valparaiso, Chile, July 29 - August 2, 2007 (CD-ROM).

Schultmann

"Organisation of Reverse Logistics Tasks in the Construction Industry", in Portugal SB07: Sustainable Construction, Materials and Practices: Challenge of the Industry for the New Millenium, Edited by Luis Braganca and Manuel Pinheiro, IOS Press, The Netherlands, pp. 577-584, ISBN: 1586037854, 2007.

Melissen

"Greening the Hotel Industry: Impossible, Inconvenient, or Shrewd?", Proceedings of the 25th EuroCHRIE Conference (European Council on Hotel, Restaurant and Institutional Education), Leeds, UK, October 25-27, 2007.

Dahmus

Dahmus, J. B., "Applications of Industrial Ecology: Manufacturing, Recyling, and Efficiency", PhD Thesis, (Advisor: Dr. Timothy G. Gutowski), Department of Mechanical Engineering, Massachusetts Institute of Technology, June 2007.

Haji

Haji, A., "Positive Semigroups for Queueing Theory and Reliability Theory", PhD Thesis, (Advisor: Dr. R. Nagel), University of Tubingen, Germany, 2007.

Ertem

Ertem, T., "Demand Driven Disassembly Planning", Master's Thesis, (Advisor: Dr. Z. P. Bayindir), Department of Industrial Engineering, Middle East Technical University, Ankara, Turkey, 2007.

Oz

Oz, T., "Reverse Logistics and Applications in the Defense Industry", Master's Thesis, (Advisor: Dr. M. Tanyeri), Dokuz Eylul University, Turkey, 2007.

Dingec

Dingec, K. D., "Analysis of Disassembly Systems in Remanufacturing using Kanban Control", Master's Thesis, (Advisor: Dr. A. Korugan), Department of Industrial Engineering, Bogazici University, Istanbul, Turkey, 2007.

Fatmawati

Fatmawati, W., "Analysis of Product Disassemblability using the Disassembly Evaluation Chart Methodology", Master's Thesis, (Advisor: Dr. A. H. A. Razak), Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 2007.

Duta

“Automatised Disassembly Cells for Electronic Used Products”, Scientific Bulletin of the Electrical Engineering Faculty, 95-100, 2007.

Shih

“Incremental Analysis for MCDM with an Application to Group TOPSIS”, European Journal of Operational Research, Vol. 186, No. 2, 720-734, 2008.

Ayob

“A Survey of Surface Mount Device Placement Machine Optimisation: Machine Classification”, European Journal of Operational Research, Vol. 186, No. 3, 893-914, 2008.

Pochampally

Book Review of "Disassembly Modeling for Assembly, Maintenance, Reuse, and Recycling" by Lambert, A. J. D. and Gupta, S. M., European Journal of Operational Research, Vol. 187, No. 1, 335-337, 2008.

Rubio

“Characteristics of the Research on Reverse Logistics (1995–2005)”, International Journal of Production Research, Vol. 46, No. 4, 1099-1120, 2008.

Gao

“Subassembly Identification Based on Grey Clustering”, International Journal of Production Research, Vol. 46, No. 4, 1137-1161, 2008.

Giudice

"Product Design for the Environment: The Life Cycle Perspective and a Methodological Framework for the Design Process", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 33-90, Chapter 2, ISBN: 9780849335525, 2008.

Vadde

"Product Life Cycle Monitoring via Embedded Sensors", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 91-104, Chapter 3, ISBN: 9780849335525, 2008.

Pochampally

"Quantitative Decision-Making Techniques for Reverse/Closed-Loop Supply Chain Design", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 105-214, Chapter 4, ISBN: 9780849335525, 2008.

McGovern

"Disassembly Line Balancing", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 235-310, Chapter 6, ISBN: 9780849335525, 2008.

Udomsawat

"Multikanban System for Disassembly Line", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 311-330, Chapter 7, ISBN: 9780849335525, 2008.

Tripathi

"Disassembly Sequencing Problem: Resolving the Complexity by Random Search Techniques", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 331-362, Chapter 8, ISBN: 9780849335525, 2008.

Tang

"Human-in-the-Loop Disassembly Modeling and Planning", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 363-386, Chapter 9, ISBN: 9780849335525, 2008.

Inderfurth

"Planning Disassembly for Remanufacture-to-Order Systems", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 387-412, Chapter 10, ISBN: 9780849335525, 2008.

Mukherjee

"Some Studies on Remanufacturing Activities in India", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 445-472, Chapter 12, ISBN: 9780849335525, 2008.

Nakashima

"Optimal Control Policy for Environment-Conscious Manufacturing Systems", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 473-489, Chapter 13, ISBN: 9780849335525, 2008.

Sarkis

"Evaluating Environment-Conscious Manufacturing Barriers with Interpretive Structural Modeling", in Environment Conscious Manufacturing, Edited by S. M. Gupta and A. J. D. Lambert, CRC Press, pp. 509-524, Chapter 15, ISBN: 9780849335525, 2008.

Agrawal

“A Collaborative Ant Colony Algorithm to Stochastic Mixed-Model U-Shaped Disassembly Line Balancing and Sequencing Problem”, International Journal of Production Research, Vol. 46, No. 6, 1405-1429, 2008.

Iyer

“GI/M/1 Queues with Server Vacations and Dependent Interarrival and Service Times”, Quality Technology and Quantitative Management, Vol. 5, No. 1, 63-75, 2008.

Barba-Gutierrez

“Lot-Sizing in Reverse MRP for Scheduling Disassembly”, International Journal of Production Economics, Vol. 111, No. 2, 741-751, 2008.

Efendigil

“A Holistic Approach for Selecting a Third-Party Reverse Logistics Provider in the Presence of Vagueness”, Computers and Industrial Engineering, Vol. 54, No. 2, 269-287, 2008.

Pochampally

“A Multi-Phase Fuzzy Logic Approach to Strategic Planning of a Reverse Supply Chain Network”, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 31, No. 1, 72-82, 2008.

Parthasarathy

“Transient Solution of a Multiserver Poisson Queue with N-Policy”, Computers and Mathematics with Applications, Vol. 55, No. 3, 550-562, 2008.

Barba-Gutierrez

“An Analysis of Some Environmental Consequences of European Electrical and Electronic Waste Regulation”, Resources, Conservation and Recycling, Vol. 52, No. 3, 481-495, 2008.

Jaber

“The Economic Order Quantity Repair and Waste Disposal Model with Entropy Cost”, European Journal of Operational Research, Vol. 188, No. 1, 109-120, 2008.

Sikdar

“The Analysis of a Finite-Buffer General Input Queue with Batch Arrival and Exponential Multiple Vacations”, International Journal of Operational Research, Vol. 3, No. 1-2, 219-234, 2008.

Ilgin

"Using Simulation Optimization for Parts Recovery and Spare Parts Inventory Management in Post Product Life Cycle", Proceedings of the 2008 Northeast Decision Sciences Institute Conference, Brooklyn, New York, pp. 543-545, March 28-30, 2008.

Nakashima

"Optimal Ordering Policy for Product Acquisition in a Remanufacturing System", Proceedings of the 2008 Northeast Decision Sciences Institute Conference, Brooklyn, New York, pp. 569-573, March 28-30, 2008.

Pochampally

"A Taguchi Loss Approach to Selection of Collection Centers for Reverse Supply Chain Design", Proceedings of the 2008 Northeast Decision Sciences Institute Conference, Brooklyn, New York, pp. 586-591, March 28-30, 2008.

Johar

"An Inventory Control Model for Product Returns", Proceedings of the 2008 Northeast Decision Sciences Institute Conference, Brooklyn, New York, pp. 557-562, March 28-30, 2008.

Massoud

"Optimal Ordering Policy in a Disassembly-to-order System With Limited Supply and Quantity Discount", Proceedings of the 2008 Northeast Decision Sciences Institute Conference, Brooklyn, New York, pp. 563-568, March 28-30, 2008.

Ondemir

"Selection of Collection Centers for Reverse Logistic Networks", Proceedings of the 2008 Northeast Decision Sciences Institute Conference, Brooklyn, New York, pp. 592-596, March 28-30, 2008.

Yamada

"Design Issues for Inverse Manufacturing Systems in Japanese Cases", Proceedings of the 2008 Northeast Decision Sciences Institute Conference, Brooklyn, New York, pp. 551-556, March 28-30, 2008.

Lambert

"Generation of Well-Balanced Solutions for Simple Assembly Line Problems", Proceedings of the 2008 Northeast Decision Sciences Institute Conference, Brooklyn, New York, March 28-30, 2008.

Xiao

“Price Competition, Cost and Demand Disruptions and Coordination of a Supply Chain with One Manufacturer and Two Competing Retailers”, Omega, Vol. 36, No. 5, 741-753, 2008.

Tseng

“Modular Design to Support Green Life-Cycle Engineering”, Expert Systems with Applications, Vol. 34, No. 4, 2524-2537, 2008.

Dolgui

"Parameterization of MRP for Supply Planning Under Lead Time Uncertainties", in Supply Chain, Theory and Applications, Edited by Vedran Kordic, I-Tech Education and Publishing, Vienna, Austria, pp. 247-262, Chapter 14, ISBN 978-3-902613-22-6, 2008.

Wang

“A Recursive Method for the F-Policy G/M/1/K Queueing System with an Exponential Startup Time”, Applied Mathematical Modelling, Vol. 32, No. 6, 958-970, 2008.

Altekin

“Profit-oriented Disassembly-Line Balancing”, International Journal of Production Research, Vol. 46, No. 10, 2675-2693, 2008.

Kovach

“Development of an Experiment-Based Robust Design Paradigm for Multiple Quality Characteristics Using Physical Programming”, International Journal of Advanced Manufacturing Technology, Vol. 35, No. 11-12, 1100-1112, 2008.

Sanchis

“Multi-Objective Engineering Design Using Preferences”, Engineering Optimization, Vol. 40, No. 3, 253-269, 2008.

Mital

"Product Development: A Structured Approach to Consumer Product Development, Design, and Manufacture", Butterworth-Heinemann, Burlington, MA, USA, ISBN: 978-0-7506-8309-8, 2008.

Sivakumar

“Design of Single-Stage Adaptive Kanban System using Genetic Algorithm”, International Journal of Services and Operations Management, Vol. 4, No. 1, 125-144, 2008.

Duta

“Control and Decision-making Process in Disassembling Used Electronic Products”, Studies in Informatics and Control Journal, Vol. 17, No. 1, 17-26, 2008.

Duta

"Real Time Balancing of Complex Disassembly Lines", Proceedings of the 17th IFAC World Congress on Automatic Control (IFAC 2008), Seoul, Korea, July 6-11, CD-ROM, 2008.

Duta

"Equilibrage en temps réel des lignes de désassemblage (Balancing Real-Time Disassembly Lines)", 5th International Conference of Francophone Automation, Bucarest, Romania, September 3-5, 2008.

Lambert

“Methods for Optimum and Near Optimum Disassembly Sequencing”, International Journal of Production Research, Vol. 46, No. 11, 2845-2865, 2008.

Chan

“Product End-Of-Life Options Selection: Grey Relational Analysis Approach”, International Journal of Production Research, Vol. 46, No. 11, 2889-2912, 2008.

Tan

“A Decision Making Model to Maximise the Value of Reverse Logistics in the Computer Industry”, International Journal of Logistics Systems and Management, Vol. 4, No. 3, 297-312, 2008.

Rao

“Evaluation of Environmentally Conscious Manufacturing Programs Using Multiple Attribute Decision-Making Methods”, Journal of Engineering Manufacture, Vol. 222, No. B3, 441-451, 2008.

Shahabudeen

“Algorithm for the Design of Single-Stage Adaptive Kanban System”, Computers and Industrial Engineering, Vol. 54, No. 4, 800-820, 2008.

Adenso-Diaz

“A Path-Relinking Approach for a Bi-Criteria Disassembly Sequencing Problem”, Computers and Operations Research, Vol. 35, No. 12, 3989-3997, 2008.

Kilincci

“A P-Invariant-Based Algorithm for Simple Assembly Line Balancing Problem of Type-1”, International Journal of Advanced Manufacturing Technology, Vol. 37, No. 3-4, 400-409, 2008.

Yi

“Research on the Selectable Disassembly Strategy of Mechanical Parts Based on the Generalized CAD Model”, International Journal of Advanced Manufacturing Technology, Vol. 37, No. 5-6, 599-604, 2008.

Ho

“Optimization of PCB Component Placements for the Collect-And-Place Machines”, International Journal of Advanced Manufacturing Technology, Vol. 37, No. 7-8, 828-836, 2008.

Korugan

"A Comparison of Pull Control Policies in Hybrid Production Systems", Proceedings of the 2008 POMS-La Jolla Meeting, La Jolla, California, May 9-May 12, 2008 (CD-ROM).

Gyorfi

"An Efficient Algorithm for Placement Sequence and Feeder Assignment Problems with Multiple Placement-Nozzles and Independent Link Evaluation", IEEE Transactions on Systems, Man and Cybernetics-Part A: Systems and Humans, Vol. 38, No. 2, 437-442, 2008.

Qu

“An Analytical Model for Reverse Automotive Production Planning and Pricing”, European Journal of Operational Research, Vol. 190, No. 3, 756-767, 2008.

Capacho

“ASALBP: The Alternative Subgraphs Assembly Line Balancing Problem”, International Journal of Production Research, Vol. 46, No. 13, 3503-3516, 2008.

Anand

“Performance Measurement System for Lean Manufacturing: A Perspective from SMEs”, International Journal of Globalisation and Small Business, Vol. 2, No. 4, 371-410, 2008.

Giribone

“Tools and Techniques for Supporting Reverse Logistics Optimization: Methodology, Case Study and Project Proposal”, International Journal of Mathematics and Computers in Simulation, Vol. 2, No. 2, 125-133, 2008.

McGovern

"Lexicographic Goal Programming and Assessment Tools for a Combinatorial Production Problem", in Multi-Objective Optimization in Computational Intelligence: Theory and Practice, Edited by Lam Thu Bui and Sameer Alam, IGI Global, pp. 151-188, Chapter 6, ISBN: 978-1-59904-498-9, 2008.

Pas

Pas, J. W., "Contract and Strategic Network Design for Reverse Production Systems", PhD Thesis, (Advisors: Dr. J. C. Ammons and Dr. M. J. Realff), Georgia Institute of Technology, April 2008.

Zuidwijk

“Strategic Response to EEE Returns: Product Eco-Design or New Recovery Processes?”, European Journal of Operational Research, Vol. 191, No. 3, 1206-1222, 2008.

Spengler

“Life Cycle Costing for Strategic Evaluation of Remanufacturing Systems”, Progress in Industrial Ecology, Vol. 5, No. 1-2, 65-81, 2008.

Ke

“Sensitivity Analysis of Machine Repair Problems in Manufacturing Systems with Service Interruptions”, Applied Mathematical Modelling, Vol. 32, No. 10, 2087-2105, 2008.

Hardas

“Development of a Genetic Algorithm for Component Placement Sequence Optimization in Printed Circuit Board Assembly”, Computers and Industrial Engineering, Vol. 55, No. 1, 165-182, 2008.

Herrmann

“Integrating the End-Of-Life Evaluation and Planning in the Product Management Process”, Progress in Industrial Ecology, Vol. 5, No. 1-2, 44-64, 2008.

Alonso

"A Case Study of the Availability of Platinum Group Metals for Electronics Manufacturers", Proceedings of the 2008 IEEE International Symposium on Electronics and the Environment, San Francisco, California, May 19-21, 2008.

Dahmus

"Modeling the Economic and Environmental Performance of Recycling Systems", Proceedings of the 2008 IEEE International Symposium on Electronics and the Environment, San Francisco, California, May 19-21, 2008.

Cruz–Ramirez

"Dismantling Interior Facilities in Buildings by Human Robot Collaboration", Proceedings of the 2008 IEEE International Conference on Robotics and Automation, Pasadena, California, May 19-23, pp. 2583-2590, 2008.

Kumar

“Sustainability of the Automotive Recycling Infrastructure: Review of Current Research and Iidentification of Future Challenges”, International Journal of Sustainable Manufacturing, Vol. 1, No. 1-2, 145-167, 2008.

Duta

“Disassembly Line Scheduling with Genetic Algorithms”, International Journal of Computers, Communications and Control, Vol. 3, No. 3, 270-280, 2008.

Xanthopoulos

"Disassembly Planning for Mechanical, Electric and Electronic Products", Proceedings of the 6th International Conference on Tribology (BALKANTRIB’08), Sozopol, Black Sea Coast, Bulgaria, June 12-14, 2008.

Ravi

“Selection of a Reverse Logistics Project for End-Of-Life Computers: ANP and Goal Programing Approach”, International Journal of Production Research, Vol. 46, No. 17, 4849-4870, 2008.

Shalaby

Shalaby, M. M., "High-Stiffness, Lock-and-Key Heat-Reversible Locator-Snap Systems for the Design for Disassembly", PhD Thesis, (Advisor: Professor K. Saitou), Department of Mechanical Engineering, University of Michigan, 2008.

Ellram

“Applying 3DCE to Environmentally Responsible Manufacturing Practices”, Journal of Cleaner Production, Vol. 16, No. 15, 1620-1631, 2008.

Alonso

"Incentives for Recycling: Mitigating Risks to Downstream Firms", Proceedings of the 2008 Global Symposium on Recycling, Waste Treatment and Clean Technology, Cancun, Mexico, October 12-15, 2008.

Lage Jr.

“Adaptations of the Kanban System: Review, Classification, Analysis and Evaluation (in Portuguese)”, Gestao e Producao, Vol. 15, No.1, 173-188, 2008.

Ostlin

Ostlin, J., "On Remanufacturing Systems", PhD Thesis, (Advisor: Professor Mats Björkman), Department of Management and Engineering, Linköpings universitet, Sweden, 2008.

Ng

“Modelling Construction Material Logistics System with Stochastic Petri Nets”, Construction Innovation: Information, Process, Management, Vol. 8, No. 1, 46-60, 2008.

Anityasari

Anityasari, M., "Reuse of Industrial Products - A Technical and Economic Model for Decision Support", PhD Thesis, (Advisor: Prof. H. Kaebernick), School of Mechanical and Manufacturing Engineering, The University of South Wales, Sydney, NSW, Australia, 2008.

Hao

“Implementing a Hybrid Simulation Model for a Kanban-Based Material Handling System”, Robotics and Computer-Integrated Manufacturing, Vol. 24, No. 5, 635-646, 2008.

McGovern

"Deterministic Search Algorithm for Sequencing and Scheduling", in Metaheuristics for Scheduling in Industrial and Manufacturing Applications, Edited by Fatos Xhafa and Ajith Abraham, Springer-Verlag, Berlin, Studies in Computational Intelligence (SCI) Series Vol. 128, pp. 105-124, Chapter 5, ISBN: 978-3-540-78984-0, 2008.

Hui

“A Genetic Algorithm for Product Disassembly Sequence Planning”, Neurocomputing, Vol. 71, No. 13-15, 2720-2726, 2008.

Kuo

"The Information Platform for Design for Disassembly and Recycling", Proceedings of the 2008 International Conference on Business and Information (BAI2008), Seoul, Korea, July 7-9, 2008.

Ilgin

"Joint Optimization of Transportation and Spare Parts Inventory Policies in a Reverse Logistics Network Using OPTQUEST", Proceedings of 2008 ASME International Mechanical Engineering Conference and Exposition, Paper No. IMECE2008-66682, Boston, Massachusetts, Oct. 31-Nov. 6, 2008.

Massoud

"Solving the Multi-Period Disassembly-To-Order System under Stochastic Yields, Limited Supply, and Quantity Discount", Proceedings of 2008 ASME International Mechanical Engineering Conference and Exposition, Paper No. IMECE2008-66968, Boston, Massachusetts, Oct. 31-Nov. 6, 2008.

Ondemir

"End-Of-Life Decisions Using Product Life Cycle Information", Proceedings of 2008 ASME International Mechanical Engineering Conference and Exposition, Paper No. IMECE2008-67039, Boston, Massachusetts, Oct. 31-Nov. 6, 2008.

Johar

"Analysis of Inventory Management in Reverse Supply Chain Using Stochastic Dynamic Programming Model", Proceedings of 2008 ASME International Mechanical Engineering Conference and Exposition, Paper No. IMECE2008-67374, Boston, Massachusetts, Oct. 31-Nov. 6, 2008.

Ben-Gal

“Robust Eco-Design: A New Application for Air Quality Engineering”, IIE Transactions, Vol. 40, No. 10, 907-918, 2008.

Bakar

“An Integrated Framework for Planning of Recycling Activities in Electrical and Electronic Sector”, International Journal of Computer Integrated Manufacturing, Vol. 21, No. 6, 617-630, 2008.

Assavapokee

"Reverse Production Systems – Optimization Modeling to Support Supply Chains for Product Recovery", in Process Systems Engineering, Volume 3: Supply Chain Optimization, Part 1, Edited by L. G. Papageorgiou and M. C. Georgiadis, Wiley-VCH, Weinheim, pp. 135-156, Chapter 5, ISBN: 978-3-527-31693-9, 2008.

Barbosa-Povoa

"Design and Planning of Closed-Loop Supply Chains", in Process Systems Engineering, Volume 3: Supply Chain Optimization, Part 1, Edited by L. G. Papageorgiou and M. C. Georgiadis, Wiley-VCH, Weinheim, pp. 187-218, Chapter 7, ISBN: 978-3-527-31693-9, 2008.

Sivakumar

“Design of Multi-Stage Adaptive Kanban System”, International Journal of Advanced Manufacturing Technology, Vol. 38, No. 3-4, 321-336, 2008.

Arda

Arda, Y., "Replenishment Policies in Multi-Supplier Systems and Decisions Optimization in Decentralized Supply Chains (in French)", PhD Thesis, (Advisor: Prof. Jean-Claude Hennet), National Institute of Applied Science of Toulouse, France, January 2008.

Louly

“Supply Planning for Single-Level Assembly System with Stochastic Component Delivery Times and Service-Level Constraint”, International Journal of Production Economics, Vol. 115, No. 1, 236-247, 2008.

de Brito

"Supply Chain Management and Sustainability: Procrastinating a Holistic Integration", Proceedings of the 2008 IEEE International Engineering Management Conference, Europe (IEMC Europe 2008), Estoril, Portugal, pp. 1-4, June 28-30, 2008.

Lei

Lei, C. H., "Disassembly Planning and Costing Through Petri Net Approach", Master's Thesis, (Advisor: Professor. H. P. Bao), Department of Mechanical Engineering, Old Dominion University, May 2008.

Bijulal

"Closed-loop Supply Chain Stability under Different Production Inventory Policies", Proceedings of the 26th International Conference of the System Dynamics Society, Athens, Greece, pp. 1-23, July 20-24, 2008.

Zhang

“RFID-Based Smart Kanbans for Just-In-Time Manufacturing”, International Journal of Materials and Product Technology, Vol. 33, No. 1-2, 170-184, 2008.

Araz

“Determining the Parameters of Dual-Card Kanban System: An Integrated Multicriteria and Artificial Neural Network Methodology”, International Journal of Advanced Manufacturing Technology, Vol. 38, No. 9-10, 965-977, 2008.

Hung

"An Efficient Newton-Raphson Procedure for Determining the Optimal Inventory Replenishment Policy", Journal of the Chinese Institute of Industrial Engineers, Vol. 25, No. 3, 237-246, 2008.

Mansour

"A Multi-period Reverse Logistics Optimisation Model for End-Of Life Vehicles Recovery based on EU Directive", International Journal of Computer Integrated Manufacturing, Vol. 21, No, 7, 764-777, 2008.

Louly

“Optimal Supply Planning in MRP Environments for Assembly Systems with Random Component Procurement Times”, International Journal of Production Research, Vol. 46, No. 19, 5441-5467, 2008.

Du

"Optimizing the Performance of Chip Shooter Machine Based on Improved Genetic Algorithm", Proceedings of the World Congress on Intelligent Control and Automation (WCICA), Chongqing, China, pp. 2849-2853, June 25-27, 2008.

Liu

"Modeling and Performance Analysis of Flow Lines with Stochastic Failures Based on Petri Nets", Proceedings of the World Congress on Intelligent Control and Automation (WCICA), Chongqing, China, pp. 6439-6444, June 25-27, 2008.

Abbey

Abbey, J. D., "Analyzing Impacts on Backorders and Ending Inventory in MRP Due to Changes in Lead-Time, Demand Variability and Safety Stock Levels", Master's Thesis, (Advisor: Professor D. J. Johnson), College of Business, Iowa State University, Ames, Iowa, 2008.

Kumar

“Rx for Smart Hospital Purchasing Decisions: The Impact of Package Design within US Hospital Supply Chain”, International Journal of Physical Distribution and Logistics Management, Vol. 38, No. 8, 601-615, 2008.

Buyukozkan

“Evaluation of Suppliers’ Environmental Management Performances by a Fuzzy Compromise Ranking Technique”, Journal of Multiple-Valued Logic and Soft Computing, Vol. 14, No. 3-5, 309-323, 2008.

Li

“A Multi-Objective Fuzzy Graph Approach for Modular Formulation Considering End-Of-Life Issues”, International Journal of Production Research, Vol. 46, No. 14, 4011-4033, 2008.

AlDurgham

“A Generalised Framework for Simulation-Based Decision Support for Manufacturing”, Production Planning and Control, Vol. 19, No. 5, 518-534, 2008.

Selvaraj

“Simulation Modeling and Analysis of Single Line Multi Stage Manufacturing System”, Journal of Scientific and Industrial Research, Vol. 67, No. 4, 277-281, 2008.

Alvares da Silva

Alvares da Silva, A. C., "System Analysis Perspectives: Lead-Acid Battery Recycling in British Columbia, Canada", PhD Thesis, (Advisors: Dr. Timothy McDaniels and Dr. Marcello Veiga), Mining Engineering, Faculty of Graduate Studies, University of British Columbia, Vancouver, March 2008.

Chen

"Efficiency Analysis of Prototype Evolution Methodology on Collaborative Design", in Virtual Modelling and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping, Edited by Silva Bartolo and Paulo Jorge Bartolo, Routledge, London, pp. 763-769, ISBN: 978-0-415-41602-3, 2008.

Guo

"H8 Control of Bullwhip Effects in Closed-Loop Supply Chain Networks with Two Chains Cooperation", Proceedings of the World Congress on Intelligent Control and Automation (WCICA), Chongqing, China, pp. 2206-2211, June 25-27, 2008.

Aryanezhad

“An Inventory Discount Model under JIT”, World Applied Sciences Journal, Vol. 4, No. 4, 506-518, 2008.

Tang

"Unified Colored Timed Petri Net Models for the Adaptive Control of Disassembly Systems", Proceedings of the 4th IEEE Conference on Automation Science and Engineering (CASE2008), Washington D.C., pp. 638-643, August 23 - 26, 2008.

Kong

"Selection of Logistics Service Provider Based on Fuzzy RBF Neural Networks", Proceedings of the IEEE International Conference on Automation and Logistics (ICAL2008), Qingdao, China, pp. 1189-1192, September 1 - 3, 2008.

Yamada

"Inverse Manufacturing Systems with Different Product Recovery Lifecycle: Japanese Cases and a Concept", Proceedings of the Global Conference on Sustainable Product Development and Life Cycle Engineering - Sustainability and Remanufacturing VI, Busan, Korea, pp. 19-22, September 29 - October 1, 2008.

Kouri

"The Principles and Planning Process of an Electronic Kanban System", in Novel Algorithms and Techniques in Telecommunications, Automation and Industrial Electronics, Edited by Tarek Sobh, Khaled Elleithy, Ausif Mahmood and Mohammad A. Karim, Springer Science and Business Media, B.V., pp. 99-104, ISBN: 978-1402087363, 2008.

Kumanan

“Modeling and Simulation of Projects with Petri Nets”, American Journal of Applied Sciences, Vol. 5, No. 12, 1742-1749, 2008.

Moran

Moran, T. J., "A Simulation and Evaluation Study of the Economic Production Quantity Lot Size and Kanban for a Single Line, Multi-Product Production System under Various Setup Times", PhD Thesis, (Advisors: Dr. F. Offodile and Dr. M. Troutt), Kent State University, 2008.

Ullah

“A Petri Net Model for the Design and Performance Evaluation of a Flexible Assembly System”, Assembly Automation, Vol. 28, No. 4, 325-339, 2008.

Dogan

Dogan, I., "Modeling and Control of Closed-Loop Remanufacturing Supply Chains under Non-Stationary Demand", PhD Thesis, (Advisor: Dr. R. B. Chinnam), Industrial and Manufacturing Engineering, Wayne State University, Detroit, Michigan, 2008.

Ullah

“A Petri Net Model for Sequence Optimization and Performance Analysis of Flexible Assembly Systems”, Journal of Manufacturing Technology Management, Vol. 19, No. 8, 985-1003, 2008.

Rugrungruang

Rugrungruang, F., "An Integrated Methodology for Assessing Physical and Technological Life of Products for Reuse", PhD Thesis, (Advisors: Drs. S. Kara and H. Kaebernick), School of Mechanical and Manufacturing Engineering, The University of South Wales, Sydney, NSW, Australia, 2008.

Sasikumar

“Issues in Reverse Supply Chains, Part I: End-Of-Life Product Recovery and Inventory Management – An Overview”, International Journal of Sustainable Engineering, Vol. 1, No. 3, 154-172, 2008.

Shimizu

“A Meta-Heuristic Approach for Supporting Adaptive Disassembly Sequencing Using a Multi-Objective Concept”, International Journal of Sustainable Engineering, Vol. 1, No. 3, 202-213, 2008.

Duflou

“Efficiency and Feasibility of Product Disassembly: A Case-Based Study”, CIRP Annals - Manufacturing Technology, Vol. 57, No. 2, 583-600, 2008.

Gao

"A Genetic Algorithm for Disassembly Scheduling with Assembly Product Structure", Proceedings of the IEEE International Conference on Service Operations and Logistics, and Informatics (SOLI2008), Beijing, China, pp. 2238-2243, October 12-15, 2008.

Yao

"Reverse Logistics Management for Remanufacturing", Proceedings of the 4th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM'08), Dalian, China, pp. 1-3, October 12-14, 2008.

Liu

"The Supply Chain Uncertain Programming of the Manufacturing/Remanufacturing Hybrid System", Proceedings of the 4th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM'08), Dalian, China, pp. 1-4, October 12-14, 2008.

Cao

"The Research on Cooperation of TPT-CLSC", Proceedings of the 4th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM'08), Dalian, China, pp. 1-5, October 12-14, 2008.

Cao

"The (s, t) Policy for a Two-echelon Inventory System with Returns", Proceedings of the IEEE International Conference on Automation and Logistics (ICAL2008), Qingdao, China, pp. 2146-2151, September 1-3, 2008.

Chai

"E-Based Inter-Enterprise Supply Chain Kanban for Demand and Order Fulfilment Management", Proceedings of the 13th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2008), Hamburg, Germany, pp. 33-35, September 15-18, 2008.

Rosentrater

"Not Just Informative, but Necessary: Infusing Green and Sustainable Topics into Engineering and Technology Curricula", Proceedings of ASEE Annual Conference and Exposition, Pittsburgh PA, pp. 1-13, June 22-25, 2008.

Chen

“Adjusting MRP for Dynamic Differentiation of Identical Items for Process Customisation”, Production Planning and Control, Vol. 19, No. 6, 616-626, 2008.

Lu

“A Multi-Objective Disassembly Planning Approach with Ant Colony Optimization Algorithm”, Journal of Engineering Manufacture, Vol. 222, No. B11, 1465-1474, 2008.

Jabal Ameli

“Modelling the Effects of Machine Breakdowns in the Generalized Cell Formation Problem”, International Journal of Advanced Manufacturing Technology, Vol. 39, No. 7-8, 838-850, 2008.

Wikner

“A Structural Framework for Closed-Loop Supply Chains”, International Journal of Logistics Management, Vol. 19, No. 3, 344-366, 2008.

Hanafi

“Reverse Logistics Strategies for End-Of-Life Products”, International Journal of Logistics Management, Vol. 19, No. 3, 367-388, 2008.

Cuc

“Reverse Logistics in Supply Chain Management”, Annals of the Oradea University, Vol. 7, No. 17, 2077-2081, 2008.

Van Rossem

Van Rossem, C., "Individual Producer Responsibility in the WEEE Directive", PhD Thesis, (Advisor: Professor Thomas Lindhqvist), International Institute for Industrial Environmental Economics, Lund University, Lund, Sweden, 2008.

Swarnkar

"An Information-Centric Approach to Enterprise Modelling for Product Recovery", Proceedings of the 2008 International Academy of Management and Business (IAMB) Conference, San Diego, California, January 28 - 30, 2008.

Yamada

"A Simulation-Based Analysis for Disassembly Systems with Reverse Blocking", Proceedings of the Ninth Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS'2008), Bali, Indonesia, December 3-5, pp. 1268-1272, 2008.

Ho

"Real-Time Hoist Control with Dispatching Rules and a Zone-Cooperation Strategy in a PCB Electroplating Line", Proceedings of the Ninth Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS'2008), Bali, Indonesia, December 3-5, pp. 2157-2164, 2008.

Afrinaldi

"Computer-based End-of-Life Product Disassemblability Evaluation Tool", Proceedings of the Ninth Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS'2008), Bali, Indonesia, December 3-5, pp. 2320-2331, 2008.

Li

"A Product Disassembly Model Based on Hybrid Directed Graph", Proceedings of the Fourth World Congress on Maintenance, Haikou City, Hainan, China, November 23-26, pp. 1-5, 2008.

Dolgui

"An Approach for the MRP Parameterization Under Lead Time Uncertainty: Branch and Cut Algorithm", Proceedings of the 17th IFAC World Congress on Automatic Control (IFAC 2008), Seoul, Korea, pp. 12849-12854, July 6-11, 2008.

Joshi

“Managing Extended Producer Responsibility using PLM Part 2: Identification of Joints for End-of-life Treatment Planning”, Computer-Aided Design and Applications, Vol. 5, No. 6, 764-773, 2008.

Mishra

Mishra, A., "Models for Managing Product Upgrade in Closed Loop Supply Chains", PhD Thesis, (Advisors: Professors A. V. Iyer and V. V. Deshpande), Department of Operations Management, Krannert School of Management, Purdue University, 2008.

Mejia

“A Petri Net Based Algorithm for Minimizing Total Tardiness in Flexible Manufacturing Systems”, Annals of Operations Research, Vol. 164, No. 1, 63-78, 2008.

Kongar

"End-of-Life Processing via Data Envelopment Analysis", in Research Methodology on Data Envelopment Analysis (DEA), Edited by Jibendu Kumar Mantri, Universal Publishers, Boca Raton, Florida, pp. 197-215, Chapter 12, ISBN: 978-1-59942-950-2, 2008.

Tridech

"Low Carbon Manufacturing: Characterization, Theoretical Models and Implementation", Proceedings of the 6th International Conference on Manufacturing Research (ICMR08), Brunel University, UK, pp. 403-412, September 9-11, 2008.

Azadeh

"A Hybrid GA-Simulation Approach to Improve JIT Systems", Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management (IEEM08), Singapore, pp. 1423-1427, December 8-10, 2008.

Lamsali

"Optimizing the Selection of Product Recovery Options", Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management (IEEM08), Singapore, pp. 1704-1708, December 8-10, 2008.

Zhao

"Reverse Logistics", Proceedings of the International Conference on Information Management, Innovation Management and Industrial Engineering (ICIII08), Volume 1, Taipei, Taiwan, pp. 349-353, December 19-21, 2008.

Ma

"Linear Physical Programming Based Approach for Web Service Selection", Proceedings of the International Conference on Information Management, Innovation Management and Industrial Engineering (ICIII08), Volume 2, Taipei, Taiwan, pp. 398-401, December 19-21, 2008.

Ondemir

"Disassembly-To-Order Model for Sensor Embedded Products", Proceedings of the Eighth International Conference on EcoBalance, Tokyo, Japan, December 10-12, 2008 (CD-ROM).

Wang

“Recovery of Waste Electrical and Electronic Equipment”, World Journal of Engineering, Vol. 5, No. 1, 71-83, 2008.

Shalaby

“Design for Disassembly with High-Stiffness Heat-Reversible Locator-Snap Systems”, Journal of Mechanical Design, Paper No. 121701, Vol. 130, No. 12, 1-7, 2008.

Sasikumar

“Issues in Reverse Supply Chains, Part II: Reverse Distribution Issues – An Overview”, International Journal of Sustainable Engineering, Vol. 1, No. 4, 234-249, 2008.

Afrinaldi

“The Evaluation Methods of Disassemblability for Automotive Components – A Review and Agenda for Future Research”, Jurnal Mekanikal, No. 26, 49-62, 2008.

Zhang

"Supporting End-of-life Product Recovery Processes in Closed Loop Supply Chains", Proceedings of the 2008 International Symposium on Intelligent Information Technology Application (IITA 2008), Shanghai, China, Volume 1, pp. 804-808, December 21-22, 2008.

Lu

"An Ant Colony Optimization Approach to Disassembly Planning", Proceedings of the 2008 International Conference on Apperceiving Computing and Intelligence Analysis (ICACIA 2008), Chengdu, China, pp. 81-84, December 13-15, 2008.

Liu

"Background Analysis for the Application of EOQ Model in a Three-Stage Steel Roller Production System with Deterministic Demands and Returns", Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management (IEEM08), Singapore, pp. 1229-1233, December 8-10, 2008.

Haiyan

"Study on N-policy Working Vacation Polling System for WDM", Proceedings of the 11th IEEE International Conference on Communication Technology (ICCT 08), Hangzhou, China, pp. 394-397, November 10-12, 2008.

Samanta

"Prognostics Using Morphological Signal Processing and Computational Intelligence", Proceedings of the 2008 International Conference on Prognostics and Health Management (PHM 08), Denver, Colorado, pp. 1-9, October 6-9, 2008.

Ozgun Demirel

“Logistics Network Design for Recoverable Manufacturing Systems: Literature Survey”, Journal of the Faculty of Engineering and Architecture of Gazi University, (in Turkish), Vol. 23, No. 4, 903-912, 2008.

Tang

“Aero-Engine Assembly Sequence Planning Based on Discrete-Time Pontryagin's Minimum Principle”, Kongzhi yu Juece/ Control and Decision, (in Chinese), Vol. 23, No. 11, 1221-1230, 2008.

Yue

"Analysis of a Machine Repair System with Warm Spares and N-Policy Vacations", Proceedings of the 7th International Symposium on Operations Research and Its Applications (ISORA’08), Lijiang, China, pp. 190-198, October 31-November 3, 2008.

Jain

“Performance Modeling of State Dependent System with Mixed Standbys and Two Modes of Failure”, Applied Mathematical Modelling, Vol. 32, No. 5, 712-724, 2008.

Quariguasi Frota Neto

Quariguasi Frota Neto, J., "Eco-Efficient Supply Chains for Electrical and Electronic Products", PhD Thesis, (Advisors: Drs. J. A. E. E. van Nunen and H. W. G. M. van Heck), Erasmus University Rotterdam, 2008.

Gorjian

"Identifying Different Determinants of Asset Life", Proceedings of the World Congress for Engineering Asset Management, Beijing, China, October 27-30, 2008.

Kaebernick

"Cradle-To-Cradle Manufacturing", in Transitions Pathways Towards Sustainable Urban Development in Australia, Edited by Peter W. Newton, Springer Science, pp. 521-536, Chapter 34, ISBN: 978-1-4020-8812-4, 2008.

Gkeleri

"A Concise Framework for Disassemblability Metrics", Proceedings of the 2008 IEEE International Conference on Systems, Man and Cybernetics (SCM2008), Singapore, October 12-15, pp. 1632-1637, 2008.

Fredholm

Fredholm, S., "Evaluating Electronic Waste Recycling Systems: The Influence of Physical Architecture on System Performance", Master's Thesis, (Advisor: Dr. R. E. Kirchain), Engineering Systems Division, Massachusetts Institute of Technology, September 2008.

Dahmus

"Modeling the Economic and Environmental Performance of Recycling Systems", Proceedings of the 2008 Global Symposium on Recycling, Waste Treatment and Clean Technology, Cancun, Mexico, October 12-15, 2008.

Drake

"Closed-Loop Supply Chain Management for Global Sustainability", in Global Sustainability Initiatives: New Models and New Approaches, Edited by James A. F. Stoner and Charles Wankel, Information Age Publishing, pp. 173-192, Chapter 9, ISBN: 1593118147, 2008.

Saman

“The DFEL Value Methodology: A Tool for Design-For-Environment in Automotive Industry”, Jurnal Mekanikal, No. 27, 23-41, 2008.

Ijomah

“A Tool to Improve Training and Operational Effectiveness in Remanufacturing”, International Journal of Computer Integrated Manufacturing, Vol. 21, No, 6, 676-701, 2008.

Wang

Wang, Z. Y., "Integration of Reverse Logistics with in New Product Design: The Cases Study in Chinese Electric and Electronic Equipment (EEE) Industry", Master's Thesis, (Advisor: Prof. K. Pawar), Industrial Engineering and Operations Management, University of Nottingham, 2008.

Di Martinelly

Di Martinelly, C., "Proposition of a Framework to Reengineer and Evaluate the Hospital Supply Chain", PhD Thesis, (Advisors: Profs. Fouad Riane and Alain Guinet), Louvain School of Management/ Facultes Universitaires Catholiques de Mons (Belgium), 2008.

Wahab

“The Application of Artificial Intelligence in Optimisation of Automotive Components for Reuse”, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, No. 2, 595-601, 2008.

Hamdi

Hamdi, A., "Exploration in the Preliminary Mechanical Design of Tradeoffs Between Automotive Architecture Constraints and Aggregate Noise Performances", PhD Thesis, (Advisor: Professor Bernard Yannou), Ecole Centrale Paris, France, 2008.

Gobbi

Gobbi, C., "The Reverse Supply Chain: Configuration, Integration and Profitability", PhD Thesis, (Advisor: Prof. Per Langaa Jensen), Department of Management Engineering, Technical University of Denmark, 2008.

Yan

"Evaluating Employee Responses to the Lean Enterprise System at a Manufacturing Company in Cape Town, South Africa", Proceedings of the Second International Conference on Future Generation Communication and Networking Symposia, Hainan, China, Vol. 4, pp. 85-92, December 13-15, 2008.

Chamier-Gliszczynski

“Disassembly Modeling of the Mechatronic Systems for Reuse and Recycling”, Acta Mechanica et Automatica, Vol. 2, No. 3, 24-27, 2008.

Arkat

“A Multi-objective Memetic Algorithm for the Generalized Cell Formation Problem Considering Machine Reliability”, International Journal of Applied Management and Technology, Vol. 5, No. 3, 139-156, 2008.

Duta

"Genetic Algorithms: A Decision Tool in Industrial Disassembly", Proceedings of the First International Conference on Complexity and Intelligence of the Artificial and Natural Complex Systems (CANS 2008), Targu Mures, Mures, Romania, pp. 55-61, November 8-10, 2008.

Yang

"Cultured Differential Computation Algorithm for Optimal Contracted Capacity of Power Consumer with Self-Owned Generating Units", Proceedings of the 16th Power Systems Computation Conference (PSCC 2008), Glasgow, Scotland, July 14-18, 2008.

Berthaut

Berthaut, F., "Controle Des Systemes de Refection Avec Approvisionnement (Control Systems with Repair Supplies) (in French)", Master's Thesis, (Advisors: Drs. R. Pellerin and A. Gharbi), Ecole Polytechnique de Montreal, Montreal (Canada), December 2008.

Mouzon

Mouzon, G., "Operational Methods and Models for Minimization of Energy Consumption in a Manufacturing Environment", PhD Thesis, (Advisor: Dr. M. B. Yildirim), Department of Industrial and Manufacturing Engineering, Wichita State Univeristy, 2008.

Michelini

"Knowledge Entrepreneurship and Sustainable Growth", Nova Science Publishers, ISBN: 978-1604563153, 2008.

Vaesen

Vaesen, K., "A Philosophical Essay on Artifacts and Norms", PhD Thesis, (Advisors: Drs. A. W. M. Meijers, M. J. de Vries and W. N. Houkes), Technische Universiteit Eindhoven, 2008.

Nakiboglu

Nakiboglu, B. G., "A Mathematical Modeling Approach for Material Requirements Planning in Remanufacturing", (in Turkish), PhD Thesis, (Advisor: Dr. R. Erol), Department of Industrial Engineering, University of Cukurova, Adana, Turkey, 2008.

Klein

Klein, T., "Le Kanban Actif Pour Assurer L'interopérabilité Décisionnelle Centralisé/ Distribué - Application à un Industriel de L'ameublement", (in French), PhD Thesis, (Advisors: Dr. G. Morel and Dr. A. Thomas), University of Nancy, Lorraine, France, 2008.

Vadher

"Dynamic Scheduling of Manufacturing System with Stochastic Timed Petrinet: A Genetic Algorithm Approach", Proceedings of the Information Systems Education Conference (ISECON2008), Pheonix, Arizona, Paper No. 5114, Novemver 2-5, 2008.

Dombacher

Dombacher, C., "Stationary Queueing Models with Aspects of Customer Impatience and Retrial Behaviour", Master's Thesis, (Advisor: Dr. K. Grill), Institute of Statistics and Probability Theory, Vienna University of Technology, Vienna, Austria, 2008.

Justel-Lozano

Justel-Lozano, Daniel, "Metodología para la eco-innovación en el diseño para desensamblado de productos industriales"", (in Spanish), PhD Thesis, (Advisor: Dr. Rosario Vidal Nadal), Departament d'Enginyeria Mecànica i Construcció, Universitat Jaume I, Castellon, Spain, December 2008.

Alias

“Multi Criteria Decision Making and its Applications: A Literature Review”, Jurnal Teknologi Maklumat, Vol. 20, No. 2, 129-152, 2008.

Bao

"Disassembly Planning and Timing through a Petri Net Approach", Proceedings of the ASME International Conference on Manufacturing Science and Engineering (MSEC2008), Evanston, Illinois, pp. 15-21., October 7-10, 2008.

Hodge

Hodge, P. J. and Lemaitre, J. D., "A Multi-Echelon Supply Chain Model for Strategic Inventory Assessment through the Deployment of Kanbans", Master's Thesis, (Advisor: Stephen C. Graves), Sloan School of Management, Massachusetts Institute of Technology, Cambridge, Massachusetts, 2008.

Mitra

“Analysis of a Two-Echelon Inventory System with Returns”, Omega, Vol. 37, No. 1, 106-115, 2009.

Balan

“Information distortion in a supply chain and its mitigation using soft computing approach”, Omega, Vol. 37, No. 2, 282-299, 2009.

Pochampally

"Strategic Planning Models for Reverse and Closed-loop Supply Chains", CRC Press, Boca Raton, Florida, ISBN: 9781420054781, 2009.

Torres

“Automatic Cooperative Disassembly Robotic System: Task Planner to Distribute Tasks Among Robots”, Control Engineering Practice, Vol. 17, No. 1, 112-121, 2009.

Pochampally

“Eco-Procurement Strategies for Environmentally Conscious Manufacturer”, International Journal of Logistics Systems and Management (IJLSM), Vol. 5, No. 1-2. 106-122, 2009.

Pochampally

"Reverse Supply Chain Design: A Neural Network Approach", in Web-Based Green Products Life Cycle Management Systems: Reverse Supply Chain Utilization, Edited by Hsiao-Fan Wang, IGI Global Publication, USA, pp. 283-300, Chapter 13, ISBN: 978-1-60566-114-8, 2009.

Kongar

"A Data Envelopment Analysis Approach for Household Appliances and Automobile Recycling", in Web-Based Green Products Life Cycle Management Systems: Reverse Supply Chain Utilization, Edited by Hsiao-Fan Wang, IGI Global Publication, USA, pp. 367-377, Chapter 16, ISBN: 978-1-60566-114-8, 2009.

Bufardi

"Environmental Criteria in a MCDM Context", in Web-Based Green Products Life Cycle Management Systems: Reverse Supply Chain Utilization, Edited by Hsiao-Fan Wang, IGI Global Publication, USA, pp. 74-92, Chapter 4, ISBN: 978-1-60566-114-8, 2009.

Hsu

"Modeling of Green Supply Chain Logistics", in Web-Based Green Products Life Cycle Management Systems: Reverse Supply Chain Utilization, Edited by Hsiao-Fan Wang, IGI Global Publication, USA, pp. 268-282, Chapter 12, ISBN: 978-1-60566-114-8, 2009.

Su

"System Dynamics Modeling for Strategic Management of Green Supply Chain", in Web-Based Green Products Life Cycle Management Systems: Reverse Supply Chain Utilization, Edited by Hsiao-Fan Wang, IGI Global Publication, USA, pp. 301-333, Chapter 14, ISBN: 978-1-60566-114-8, 2009.

Wang

"A Vehicle Routing and Scheduling Model for a Distribution Center", in Web-Based Green Products Life Cycle Management Systems: Reverse Supply Chain Utilization, Edited by Hsiao-Fan Wang, IGI Global Publication, USA, pp. 334-366, Chapter 15, ISBN: 978-1-60566-114-8, 2009.

Tsoulfas

"Applying Web-Based Collaborative Decision-Making in Reverse Logistics: The Case of Mobile Phones", in Web-Based Green Products Life Cycle Management Systems: Reverse Supply Chain Utilization, Edited by Hsiao-Fan Wang, IGI Global Publication, USA, pp. 401-415, Chapter 18, ISBN: 978-1-60566-114-8, 2009.

Kannan

“Analysis of Closed Loop Supply Chain Using Genetic Algorithm and Particle Swarm Optimisation”, International Journal of Production Research, Vol. 47, No. 5, 1175-1200, 2009.

Lazaro

“Dynamic Analysis of an Automobile Assembly Line Considering Starving and Blocking”, Robotics and Computer-Integrated Manufacturing, Vol. 25, No. 2, 271-279, 2009.

Osorio

“An Analytic Finite Capacity Queueing Network Model Capturing the Propagation of Congestion and Blocking”, European Journal of Operational Research, Vol. 196, No. 3, 996-1007, 2009.

Mutha

“Strategic Network Design for Reverse Logistics and Remanufacturing Using New and Old Product Modules”, Computers and Industrial Engineering, Vol. 56, No. 1, 334-346, 2009.

Xu

“Non-Probabilistic Robust Optimal Design Method”, Chinese Journal of Mechanical Engineering, Vol. 22, No. 2, 1-6, 2009.

Wu

“Optimizing PCB Assembly for Family Setup Strategy”, Assembly Automation, Vol. 29, No. 1, 61-67, 2009.

Roy

“A Production-Inventory Model with Remanufacturing for Defective and Usable Items in Fuzzy-Environment”, Computers and Industrial Engineering, Vol. 56, No. 1, 87-96, 2009.

Behret

“Performance Analysis of a Hybrid System Under Quality Impact of Returns”, Computers and Industrial Engineering, Vol. 56, No. 2, 507-520, 2009.

Pokharel

“Perspectives in Reverse Logistics: A Review”, Resources, Conservation and Recycling, Vol. 53, No. 4, 175-182, 2009.

Ke

“Machine Repair Problem in Production Systems with Spares and Server Vacations”, RAIRO-Operations Research, Vol. 43, No. 1, 35-54, 2009.

Barba-Gutierrez

“Reverse MRP Under Uncertain and Imprecise Demand”, International Journal of Advanced Manufacturing Technology, Vol. 40, No. 3-4, 413-424, 2009.

Kim

“Dynamic Process Planning Control of Hybrid Disassembly Systems”, International Journal of Advanced Manufacturing Technology, Vol. 40, No. 9-10, 1016-1023, 2009.

Jayaraman

“What is the Buzz About the Cross-Functional Role of Purchasing in a Sustainable Supply Chain Environment?”, International Journal of Logistics Systems and Management (IJLSM), Vol. 5, No. 1-2, 7-20, 2009.

Yamada

“A Performance Evaluation of Disassembly Systems with Reverse Blocking”, Computers and Industrial Engineering, Vol. 56, No. 3, 1113-1125, 2009.

Tripathi

“Real World Disassembly Modeling and Sequencing Problem: Optimization by Algorithm of Self-Guided Ants (ASGA)”, Robotics and Computer-Integrated Manufacturing, Vol. 25, No. 3, 483-496, 2009.

Kim

“A Branch and Bound Algorithm for Disassembly Scheduling with Assembly Product Structure”, Journal of Operational Research Society, Vol. 60, No. 3, 419-430, 2009.

Xanthopoulos

“On the Optimal Design of the Disassembly and Recovery Processes”, Waste Management, Vol. 29, No. 5, 1702-1711, 2009.

Aydin

“A Conceptual Framework for Scheduling Purposes in Mass Customisation Systems: An Agent-Based Approach”, International Journal of Mass Customisation, Vol. 3, No. 2, 208-225, 2009.

Sasikumar

“Issues in Reverse Supply Chains, Part III: Classification and Simple Analysis”, International Journal of Sustainable Engineering, Vol. 2, No. 1, 2-27, 2009.

Parveen

“An Integrated Approach to Design and Analysis of Lean Manufacturing System: A Perspective of Lean Supply Chain”, International Journal of Services and Operations Management, Vol. 5, No. 2, 175-208, 2009.

Zah

"The Cognitive Factory", in Changeable and Reconfigurable Manufacturing Systems, Edited by Hoda A. ElMaraghy, Springer, pp. 355-371, Chapter 20, ISBN: 1848820666, 2009.

Iakovou

“A Methodological Framework for End-Of-Life Management of Electronic Products”, Resources, Conservation and Recycling, Vol. 53, No. 6, 329-339, 2009.

Moran

"A Simulation Study of Economic Production Quantity Lot Size to Kanban for a Single Line Production System under Various Setup Times with Completion Time as Performance Metric", Proceedings of the College Teaching and Learning (TLC) Conference and the International Applied Business Research (IABR) Conference, San Antonio, March 16-19, 2009.

Massoud

"Dynamic Programming for Solving Disassembly-To-Order System under Stochastic yields, Limited Supply, and Quantity Discount", Proceedings of the 2009 Northeast Decision Sciences Institute Conference, Mohegan Sun, Uncasville, CT, pp. 567-572, April 1-April 3, 2009.

Ilgin

"Analysis of a Kanban Controlled Disassembly Line with Sensor Embedded Products", Proceedings of the 2009 Northeast Decision Sciences Institute Conference, Mohegan Sun, Uncasville, CT, pp. 555-560, April 1-April 3, 2009.

Ilgin

"The Effect of Disassembly Process on Spare Parts Inventory Management in Post Product Life Cycle", Proceedings of the 2009 Northeast Decision Sciences Institute Conference, Mohegan Sun, Uncasville, CT, pp. 561-566, April 1-April 3, 2009.

Ondemir

"Cost-Benefit Analysis of Sensor-Embedded Products Based Disassembly-To-Order System", Proceedings of the 2009 Northeast Decision Sciences Institute Conference, Mohegan Sun, Uncasville, CT, pp. 573-578, April 1-April 3, 2009.

Johar

"A Stochastic Inventory Management Approach in the Disassembly Line Portion of Reverse Logistics", Proceedings of the 2009 Northeast Decision Sciences Institute Conference, Mohegan Sun, Uncasville, CT, pp. 537-542, April 1-April 3, 2009.

Pochampally

"Use of Crystal Ball® to Predict Profitability of a Reverse Supply Chain", Proceedings of the 2009 Northeast Decision Sciences Institute Conference, Mohegan Sun, Uncasville, CT, pp. 543-548, April 1-April 3, 2009.

Kongsuwan

"Integrating Physical Programming to Information Security System Management", Proceedings of the 11th International Conference on Advanced Communication Technology (ICACT2009), Phoenix Park, Korea, February 15 - 18, pp. 143-148, 2009.

Rangavajhala

“Equality Constraints in Multiobjective Robust Design Optimization: Decision Making Problem”, Journal of Optimization Theory and Applications, Vol. 140, No. 2, 315-337, 2009.

Sivakumar

“Design of Multi-Stage Adaptive Kanban System Using Simulated Annealing Algorithm”, International Journal of Manufacturing Research, Vol. 4, No. 1, 95-116, 2009.

Yan

“Evaluating Employee Responses to the Lean Enterprise System at a Manufacturing Company in Cape Town, South Africa”, International Journal of Control and Automation, Vol. 2, No. 1, 11-22, 2009.

Akcali

“Network Design for Reverse and Closed-Loop Supply Chains: An Annotated Bibliography of Models and Solution Approaches”, Networks, Vol. 53, No. 3, 231-248, 2009.

Pineyro

“Inventory Policies for the Economic Lot-Sizing Problem with Remanufacturing and Final Disposal Options”, Journal of Industrial and Management Optimization, Vol. 5, No. 2, 217-238, 2009.

Wazed

“Uncertainty Factors in Real Manufacturing Environment”, Australian Journal of Basic and Applied Sciences, Vol. 3, No. 2, 342-351, 2009.

Dilek

"The More Rating: New Model -A Comparative Analysis of Different Companies from Different Countries-", Proceedings of the International Workshop on Advances in Machine Learning for Computational Finance, London, U. K., July 20 - 21, 2009.

Kannan

“A Metaheuristics-Based Decision Support System for the Performance Measurement of Reverse Supply Chain Management”, International Journal of Business Performance Management, Vol. 11, No. 1-2, 152-169, 2009.

Graman

"Value Recovery in the Built Environment: A Supply Chain Perspective", Proceedings of the 2009 POMS-Orlando Meeting, Orlando, Florida, May 1-May 4, 2009 (CD-ROM).

Machado

"Use of Life Cycle Assessment in Sustainable Manufacturing: Review of Literature, Analysis and Trends", Proceedings of the 2009 POMS-Orlando Meeting, Orlando, Florida, May 1-May 4, 2009 (CD-ROM).

Aksoy

"Recoverable System Performance with Server Vacations", Proceedings of the 2009 POMS-Orlando Meeting, Orlando, Florida, May 1-May 4, 2009 (CD-ROM).

de Nitto Persone

“Analysis of Cyclic Queueing Networks with Parallelism and Vacation”, Annals of Operations Research, Vol. 170, No. 1, 95-112, 2009.

Pochampally

“Metrics for Performance Measurement of a Reverse/ Closed-Loop Supply Chain”, International Journal of Business Performance and Supply Chain Modeling (IJBPSCM), Vol. 1, No. 1, 8-32, 2009.

Kongar

“Solving the Disassembly-To-Order Problem Using Linear Physical Programming”, International Journal of Mathematics in Operational Research (IJMOR), Vol. 1, No. 4, 504-531, 2009.

Che

“Cooperator Selection and Industry Assignment in Supply Chain Network with Line Balancing Technology”, Expert Systems with Applications, Vol. 36, No. 7, 10381-10387, 2009.

Zhang

“Modelling Reconfigurable Manufacturing Systems with Coloured Timed Petri Nets”, International Journal of Production Research, Vol. 47, No. 16, 4569-4591, 2009.

Rao

“An Improved Compromise Ranking Method for Evaluation of Environmentally Conscious Manufacturing Programs”, International Journal of Production Research, Vol. 47, No. 16, 4399-4412, 2009.

Chu

“Economical Green Product Design Based on Simplified Computer-Aided Product Structure Variation”, Computers in Industry, Vol. 60, No. 7, 485-500, 2009.

Aksen

“Design and Analysis of Government Subsidized Collection Systems for Incentive-Dependent Returns”, International Journal of Production Economics, Vol. 119, No. 2, 308-327, 2009.

Subramoniam

“Remanufacturing for the Automotive Aftermarket-Strategic Factors: Literature Review and Future Research Needs”, Journal of Cleaner Production, Vol. 17, No. 13, 1163-1174, 2009.

Chakravarthy

“Analysis of a Multi-Server Queue with Markovian Aarrivals and Synchronous Phase Type Vacations”, Asia-Paciñc Journal of Operational Research, Vol. 26, No. 1, 85-113, 2009.

Wu

“The Impact of Integrating Return Components Planning with Purchasing Decisions on Purchasing Performance”, International Journal of Logistics Management, Vol. 20, No. 1, 57-78, 2009.

Jain

“N-Policy Machine Repair System with Mixed Standbys and Unreliable Server”, Quality Technology and Quantitative Management, Vol. 6, No. 2, 171-184, 2009.

Jain

“Threshold N-Policy for Degraded Machining System with Multiple Type Spares and Multiple Vacations”, Quality Technology and Quantitative Management, Vol. 6, No. 2, 185-203, 2009.

Wang

“Controlling Arrivals for a Queueing System with an Unreliable Server: Newton-Quasi Method”, Applied Mathematics and Computation, Vol. 213, No. 1, 92-101, 2009.

Battini

“Buffer Size Design Linked to Reliability Performance: A Simulative Study”, Computers and Industrial Engineering, Vol. 56, No. 4, 1633-1641, 2009.

Mukherjee

“Analysis of Issues Relating to Remanufacturing Technology - A Case of an Indian Company”, Technology Analysis and Strategic Management, Vol. 21, No. 5, 639-652, 2009.

Samanta

“Analysis of a Discrete-Time GI/Geo/1 Queue with Single Vacation”, International Journal of Operational Research, Vol. 5, No. 3, 292-310, 2009.

Shih

“The Hybrid Heuristic System in Balancing the PCB Assembly Line of Surface Mount Technology with Multiple Placement Machines”, International Journal of Electronic Business Management, Vol. 7, No. 1, 37-44, 2009.

Ayob

“The Optimisation of the Single Surface Mount Device Placement Machine in Printed Circuit Board Assembly: A Survey”, International Journal of Systems Science, Vol. 40, No. 6, 553-569, 2009.

Caceres

“Transient Environmental Effects of Light Alloy Substitutions in Transport Vehicles”, Materials and Design, Vol. 30, No. 8, 2813-2822, 2009.

Lehr

"From Waste to Value - A System Dynamics Model for Strategic Decision Making in Closed-Loop Supply Chains", Proceedings of the 27th International Conference of the System Dynamics Society, Albuquerque, New Mexico, pp. 1-15, July 26-30, 2009.

Esmaeilian

“Allocating and Balancing of Mixed Model Production through the Parallel Assembly Lines”, European Journal of Scientific Research, Vol. 31, No. 4, 616-631, 2009.

Qian

“Design for Environment: An Environmentally Conscious Analysis Model for Modular Design”, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 32, No. 3, 164-175, 2009.

Leurini

Leurini, E., "MUTOID", Master's Thesis, Man and Humanity Master Program, Design Academy, Eindhoven, The Netherlands, 2009.

Mottonen

“Managerial View on Design for Manufacturing”, Industrial Management and Data Systems, Vol. 109, No. 6, 859-872, 2009.

Lifset

"Industrial Ecology in the Age of Input-Output Analysis", in Handbook of Input-Output Economics in Industrial Ecology, Edited by Sangwon Suh, Springer Science, pp. 3-21, Chapter 1, ISBN: 978-1-4020-4083-2, 2009.

Tsai

“Treatment and Recycling System Optimisation with Activity-Based Costing in WEEE Reverse Logistics Management: An Environmental Supply Chain Perspective”, International Journal of Production Research, Vol. 47, No. 19, 5391-5420, 2009.

Yi

"Disassembling Analysis for the Automotive Products Based on Generalized CAD Models", Proceedings of the 2009 World Congress on Computer Science and Information Engineering (CSIE 2009), Los Angeles, California, Volume 2, pp. 24-28, March 31-April 2, 2009.

Zhang

"Study on Disassembly Planning of Production System in Reverse Logistics", Proceedings of the 2009 World Congress on Computer Science and Information Engineering (CSIE 2009), Los Angeles, California, Volume 3, pp. 167-171, March 31-April 2, 2009.

Miao

"The Returns Disposition Problem with Outsourcing in Reverse Supply Chains", Proceedings of the Sixth International Conference on Service Systems and Service Management (ICSSSM’09), Xiamen, China, pp. 131-134, June 8-10, 2009.

Johansson

"Lean vs. Green Manufacturing: Similarities and Differences", Proceedings of the Sixteenth International Annual European Operations Management Association Conference (EurOMA09), Goteborg, Sweden, June 14-17, 2009.

Gupta

“A Goal Programming Model for the Operation of Closed-Loop Supply Chains”, Engineering Optimization, Vol. 41, No. 8, 713-735, 2009.

Koc

“Two Exact Formulations for Disassembly Line Balancing Problems with Task Precedence Diagram Construction Using an AND/OR Graph”, IIE Transactions, Vol. 41, No. 10, 866-881, 2009.

Ogunniyi

“Froth Flotation for Beneficiation of Printed Circuit Boards Comminution Fines: An Overview”, Mineral Processing & Extractive Metallurgy Review, Vol. 30, No. 2, 101-121, 2009.

Liu

“Dynamic Card Number Adjusting Strategy in Card-Based Production System”, International Journal of Production Research, Vol. 47, No. 21, 6037-6050, 2009.

Kwak

“Eco-Architecture Analysis for End-Of-Life Decision Making”, International Journal of Production Research, Vol. 47, No. 22, 6233-6259, 2009.

Mirakhorli

"New Approach in Supplier Selection Using Linear Physical Programming", Proceedings of the IEEE International Conference on Service Operations and Logistics, and Informatics (SOLI2009), Chicago, Illinois, pp. 47-51, July 22-24, 2009.

Safaei

“A Series–Parallel Redundant Reliability System for Cellular Manufacturing Design”, Journal of Risk and Reliability, Vol. 223, No. 3, 233-250, 2009.

Genevois

"Green Product Design for EEE", Proceedings of the 39th International Conference on Computers and Industrial Engineering, Troyes, France, July 6-8, pp. 963-968, 2009.

Yuksel

"An Analytical Hierarchy Process Decision Model for E-Waste Collection Center Location Selection", Proceedings of the 39th International Conference on Computers and Industrial Engineering, Troyes, France, July 6-8, pp. 1684-1689, 2009.

Qiaolun

"Pricing Decisions for New and Remanufactured Products Considering Market Risk", Proceedings of the Chinese Control and Decision Conference (CCDC 2009), Guilin, China, pp. 1460-1464, June 17-19, 2009.

Wang

“Optimal Management of the Machine Repair Problem with Working Vacation: Newton's Method”, Journal of Computational and Applied Mathematics, Vol. 233, No. 2, 449-458, 2009.

Wu

“A Scheduling Problem for PCB Assembly: A Case with Multiple Lines”, International Journal of Advanced Manufacturing Technology, Vol. 43, No. 11-12, 1189-1201, 2009.

Amelia

“Initiating Automotive Component Reuse in Malaysia”, Journal of Cleaner Production, Vol. 17, No. 17, 1572-1579, 2009.

Le

"A Path Planning Approach to (Dis)Assembly Sequencing", Proceedings of the 5th IEEE Conference on Automation Science and Engineering (CASE2009), Bangalore, India, pp. 286-291, August 22-25, 2009.

Sunke

Sunke, N., "Planning of Construction Projects: A Managerial Approach", PhD Thesis, (Advisors: Profs. Frank Schultmann and Jay Yang), Department of Civil Engineering, University of Siegen, Germany, 2009.

Giudice

“End-Of-Life Impact Reduction through Analysis and Redistribution of Disassembly Depth: A Case Study in Electronic Device Redesign”, Computers and Industrial Engineering, Vol. 57, No. 3, 677-690, 2009.

Cheikhrouhou

“A Markovian Model for the Hybrid Manufacturing Planning and Control Method 'Double Speed Single Production Line'”, Computers and Industrial Engineering, Vol. 57, No. 3, 1022-1032, 2009.

Zhang

"Modeling and Optimization for Hybrid Layout Design with Behavioural Constraints", Proceedings of the 2009 IEEE Conference on Mechatronics and Automation (ICMA2009), Changchun, Jilin, China, pp. 5052-5056, August 9-12, 2009.

Alkaya

"A Literature Survey of the Operation Optimization in Chip Shooter Placement Machines", Proceedings of the 2009 Portland International Center for Management of Engineering and Technology Conference (PICMET2009), Portland, Oregon, USA, pp. 3296-3306, August 2-6, 2009.

Catulli

"Green Branding and Networks: Building Salvaged Material in a Branded Value Proposition", Proceedings of the 25th Industrial Marketing and Purchasing Conference (IMP 2009), Marseilles, France, pp. 1-12, September 3-5, 2009.

Mottonen

Mottonen, M., "Requirements Engineering: Linking Design and Manufacturing in ICT Companies", PhD Thesis, (Advisor: Dr. Harri Haapasalo), Faculty of Technology, Department of Industrial Engineering and Management, University of Oulu, Finland, 2009.

Huang

“Disassembly Processes with Disassembly Matrices and Effects of Operations”, Assembly Automation, Vol. 29, No. 4, 348-357, 2009.

Shalaby

“High-Stiffness, Lock-and-Key Heat-Reversible Locator-Snap Systems for the Design for Disassembly”, Journal of Mechanical Design, Paper No. 041005, Vol. 131, No. 4, 1-9, 2009.

Jain

“Bi-Level Control Policy for Redundant Repairable Multicomponent System with Reneging, Set Up and Vacation”, International Journal of Engineering, Vol. 22, No. 2, 159-168, 2009.

Nikbakhsh

"Green Supply Chain Management", in Supply Chain and Logistics in National, International and Governmental Environment: Concepts and Models, Edited by R. Z. Farahani, N. Asgari and H. Davarzani, Springer-Verleg, Berlin, pp. 195-220, Chapter 9, ISBN: 978-3790821550, 2009.

Sandanayake

Sandanayake, Y. G., "Development of a Model for Performance Measurement in Just-In-Time Enabled Manufacturing Environments", PhD Thesis, (Advisor: Dr. C. F. Oduoza), University of Wolverhampton, Wolverhampton, U.K., March 2009.

Gungor

“Pamuklu Tekstiller ve Cevre: Bir Bornozunyasam Dongu Degerlendirmesi (Cotton Textiles and the Environment: Life Cycle Assessment of a Bathrobe)”, Tekstil ve Konfeksiyon (Textiles and Apparel) (in Turkish), Vol. 19, No. 3, 197-205, 2009.

Godichaud

Godichaud, M., "Outils d’aide a la Decision pour la Selection des Filieres de Valorisation des Produits de la Deconstruction des Systemes en fin de vie: Application au Domaine Aeronautique (Tools for Decision Support for Selecting Courses of Recovery of Proceeds of Deconstructing Systems into End Of Life as Applied to Aeronautics) (in French)", PhD Thesis, (Advisors: Drs. Francois Peres and Ayeley Tchangan), National Polytechnic Institute of Toulouse, Toulouse (France), 2009.

Li

“A Stochastic Dynamic Programming Based Model for Uncertain Production Planning of Re-Manufacturing System”, International Journal of Production Research, Vol. 47, No. 13, 3657-3668, 2009.

Topcu

Topcu, A., "A Heuristic Approach Based on Golden Section Simulation-Optimization for Reconfigurable Remanufacturing Inventory Space Planning", PhD Thesis, (Advisors: Drs. T. Cullinane and J. Benneyan), Department of Mechanical and Industrial Engineering, Northeastern University, August 2009.

Li

“A Product Selective Disassembly Model Based on Hybrid Directed Graph (in Chinese)”, Zhongguo Jixie Gongcheng/China Mechanical Engineering, Vol. 20, No. 5, 553-558, 2009.

McGovern

Book Review of "Strategic Planning Models for Reverse and Closed-loop Supply Chains" by Pochampally, K. K., Nukala, S. and Gupta, S. M., International Journal of Production Research, Vol. 47, No. 23, 6777-6779, 2009.

Sivakumar

“Algorithms for the Design of a Multi-Stage Adaptive Kanban System”, International Journal of Production Research, Vol. 47, No. 23, 6707-6738, 2009.

Zhang

“Supply Chain Configuration with Co-ordinated Product, Process and Logistics Decisions: an Approach Based on Petri Nets”, International Journal of Production Research, Vol. 47, No. 23, 6681-6706, 2009.

Hong

“Implementation of Strategic Green Orientation in Supply Chain”, European Journal of Innovation Management, Vol. 12, No. 4, 512-532, 2009.

Errington

Errington, M., "Business Processes and Strategic Framework for Inspection in Remanufacturing", PhD Thesis, (Advisors: Drs. Stephen Childe and Ken Evans), University of Exeter, May 2009.

Guneri

“Flexible Kanbans to Enhance Volume Flexibility in a JIT Environment: A Simulation Based Comparison via ANNs”, International Journal of Production Research, Vol. 47, No. 24, 6807-6819, 2009.

Amelia

“Development of an Optimisation Model for Automotive Component Reuse”, Journal of Advanced Manufacturing Technology, Vol. 3, No. 1, 87-96, 2009.

Lin

“Critical Material Planning for TFT-LCD Production Industry”, International Journal of Production Economics, Vol. 122, No. 2, 639-655, 2009.

Chouinard

“Conceptual Framework for the Design and Management of Value Loops - Application to a Wheelchair Allocation Context”, Production Planning and Control, Vol. 20, No. 8, 703-723, 2009.

Widi

Widi, S., "Inventory Management of Returnable Bottles of Brewery", Master's Thesis, (Advisor: Dr. R. Dekker), Erasmus University, Rotterdam, The Netherlands, 2009.

Ge

"Coordination with Incomplete Information in a Closed-Loop Supply Chain under Retailer Collection Channel", Proceedings of the 16th Annual International Conference on Management Science and Engineering (ICMSE 2009), Moscow, Russia, Sept. 14-16, 2009.

Wang

“Assembly Sequences Merging Based on Assembly Unit Partitioning”, International Journal of Advanced Manufacturing Technology, Vol. 45, No. 7-8, 808-820, 2009.

Chang

“Artificial Immune Systems for Assembly Sequence Planning Exploration”, Engineering Applications of Artificial Intelligence, Vol. 22, No. 8, 1218-1232, 2009.

Jaber

"Modeling Hidden Costs of Inventory Systems: A Thermodynamic Approach", in Inventory Management: Non-Classical Views, Edited by M. Y. Jaber, CRC Press, Boca Raton, Florida, Chapter 9, pp. 199-218, ISBN: 978-1-4200-7997-5, 2009.

Klett

Klett, J., "Systematic Design of Connections under Consideration of Assembly and Disassembly Related Properties", PhD Thesis, (Advisors: Drs. G. Seliger and H. Birkhofer), Technical University of Berlin, 2009.

Junquera

“Environmental Concurrent Engineering: A Way to Competitive Advantage?”, World Review of Entrepreneurship, Management and Sustainable Development, Vol. 5, No. 3, 256-270, 2009.

Braghirolli

Braghirolli, L. F., "ESTUDO DA LINEARIDADE DA PRODUÇÃO EM CÉLULAS DE MANUFATURA ATRAVÉS DE SIMULAÇÃO A EVENTOS DISCRETOS", (in Portuguese), Master’s Thesis, (Advisor: Dr. Giovana Savitri Pasa), Federal University of Rio Grande do Sul, Brazil, 2009.

Kim

Kim, Y. S., "Quality Embedded Intelligent Remanufacturing", PhD Thesis, (Advisors: Drs. P. Xirouchakis and D. Kiritsis), Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland, 2009.

Chen

"Using ANP for the Selection of Green Supply Chain Management Strategies", Proceedings of the 10th International Symposium on the Analytic Hierarchy/Network Process (ISAHP 2009), Pittsburgh, Pennsylvania, July 29-August 1, 2009.

Tian

"Research on Modularization Fuzzy Petri Net of Disassembly System", Proceedings of the 16th IEEE International Conference on Industrial Engineering and Engineering Management (IE&EM 2009), Beijing, P. R. China, pp. 822-826, October 21-23, 2009.

Chen

"Study on Electronics Recycling Process", Proceedings of the 16th IEEE International Conference on Industrial Engineering and Engineering Management (IE&EM 2009), Beijing, P. R. China, pp. 1602-1606, October 21-23, 2009.

Noor

“Prediction of End-of-Life Strategies for Household Equipments Using Artificial Intelligent”, American Journal of Applied Sciences, Vol. 6, No. 10, 1838-1844, 2009.

Schmid

Schmid, E., "Koordination im Reverse Logistics", (in German), PhD Thesis, (Advisor: Dr. Thomas S. Spengler), Technical University of Braunschweig, Braunschweig, Germany, 2009.

Lee

Lee, Y. J., "Integrated Forward-Reverse Logistics System Design: An Empirical Investigation", PhD Thesis, (Advisor: Dr. Timothy K. Baker), College of Business, Washington State University, May 2009.

Dassow

“Petri Net Controlled Grammars: The Power of Labeling and Final Markings”, Romanian Journal of Information Science and Technology, Vol. 12, No. 2, 191-207, 2009.

Wang

"The Design of Reverse Logistics Network Based on Remanufacturing for a Diesel Engine Enterprise", Proceedings of the International Conference on Management and Service Science (MASS 2009), Wuhan/Beijing, P. R. China, pp. 1-4, September 20-22, 2009.

McGovern

"Capacity Improvement Analytical Tools and Benchmark Development for Terminal Operations", Proceedings of the 28th IEEE/AIAA Digital Avionics Systems Conference (DASC 2009), Orlando, Florida, pp. 3.A.6-1 - 3.A.6-11, October 23-29, 2009.

Kongar

“A Multiple Objective Tabu Search Approach for End-of-Life Product Disassembly”, International Journal of Advanced Operations Management (IJAOM), Vol. 1, No. 2-3, pp. 177-202, 2009.

Jaafar

"An Analysis of the Institutional Framework of the Commercial Vehicle Rebuilt Industry in Malaysia", Proceedings of the Conference on Scientific and Social Research, Universiti Teknologi MARA, Ayer Keroh, Melaka, March 14-15, 2009.

Amelia

"Disassembly Time Evaluation for Enhancing the Reusability of Automotive Components", Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management (IEEM09), Hong Kong, pp. 115-119, December 8-11, 2009.

Wazed

“Impacts of Common Components on Production System in an Uncertain Environment”, Scientific Research and Essays, Vol. 4, No. 12, 1505-1517, 2009.

Ben Amar

"A Mathematical Model for Cyclic Scheduling with Assembly Tasks and Work-In-Process Minimization", Proceedings of the 2009 IEEE International Symposium on Assembly and Manufacturing (ISAM2009), Suwon, Korea, 358-363, November 17-20, 2009.

Viau

"Airframe Dismantling Optimization for Aerospace Aluminum Valorization", Proceedings of the 2009 IEEE International Symposium on Assembly and Manufacturing (ISAM2009), Suwon, Korea, 77-82, November 17-20, 2009.

Mangal

“Inventory Control in Supply Chain through Lateral Transshipment: A Case Study in Indian Industry”, International Journal of Engineering, Vol. 3, No. 5, 443-457, 2009.

Bereketli

“Green Product Design for Mobile Phones”, World Academy of Science, Engineering and Technology, Vol. 58, 213-217, 2009.

Egilmez

Egilmez, G., "Consumption-Driven Finite Capacity Inventory Planning and Production Control", Master's Thesis, (Advisor: Dr. G. A. Suer), Department of Industrial and Systems Engineering, Ohio University, 2009.

Lieckens

Lieckens, K., "Reverse Logistics Network Design: The Impact of Lead Times and Stochasticity", PhD Thesis, (Advisor: Dr. Nico Vandaele), Universiteit Antwerpen, Belgium, 2009.

Kianfar

“Lot Sizing and Lead Time Quotations in Assembly Systems”, Scientia Iranica - Transaction E: Industrial Engineering, Vol. 16, No. 2, 100-113, 2009.

Parlikad

“A Bayesian Decision Support System for Vehicle Component Recovery”, International Journal of Sustainable Manufacturing, Vol. 1, No. 4, 415-436, 2009.

Fortes

“Green Supply Chain Management: A Literature Review”, Otago Management Graduate Review, Vol. 7, 51-62, 2009.

Manakitsirisuthi

"Reverse Logistics Sustainability For Environmental Performance", International Conference on Green and Sustainable Innovation, Chiang Rai, Thailand, December 2-4, 2009.

Ghoreishi

Ghoreishi, N., "A General Modeling Framework for Cost Benefit Analysis of Remanufacturing", D.Sc. Thesis, (Advisor: Professor Mark J. Jakiela), Washington University in St. Louis, 2009.

Wazed

“Managing Quality and Lead Time Uncertainties using Component Commonality in a Production Environment”, Engineering e-Transaction, Vol. 4, No. 1, 21-34, 2009.

Sarma

“Environment-Friendly Strategies for Efficient Utilization of Cutting Tools in Finish Turning”, Journal of Manufacturing Science and Engineering, Vol. 131, No. 6, 1-5, 2009.

Gulsun

“An Aggregate Production Planning Strategy Selection Methodology based on Linear Physical Programming”, International Journal of Industrial Engineering, Vol. 16, No. 2, 135-146, 2009.

Arakawa

"Operation Design for Disassembly Considering a Product Structure", Proceedings of the 2009 World Symposium on Group Technology/ Cellular Manufacturing, Kitakyusu, Japan , pp. 190-197, February 16-18, 2009.

Shi

"The Evaluation of Software Trustworthiness with FAHP and FTOPSIS Methods", Proceedings of the 2009 International Conference on Computational Intelligence and Software Engineering (CiSE 2009), Wuhan, China, pp. 1-5, Dec, 11-13, 2009.

Caballero

“Goal Programming: Realistic Targets for the Near Future”, Journal of Multi-Criteria Decision Analysis, Vol. 16, No. 3-4, 79-110, 2009.

Wadhwa

“Flexibility Focused Decision and Information Sharing Model for Product Recovery System”, Global Journal of Flexible Systems Management,Vol. 10, No. 3, 15-22, 2009.

El Saadany

El Saadany, A. M. A., "Inventory Management in Reverse Logistics with Imperfect Production, Learning, Lost Sales, Subassemblies, and Price/Quality Considerations", PhD Thesis, (Advisor: Dr. M. Y. Jaber), Department of Mechanical Engineering, Ryerson University, Canada, 2009.

Emmanouilidis

"Design Requirements for Wireless Sensor–Based Novelty Detection in Machinery Condition Monitoring", Proceedings of the World Congress for Engineering Asset Management, Athens, Greece, September 28-30, 2009.

Mathiyalagan

“An Integrated Model for a Class of Sourcing Problem Using Multiple Regression Analysis and Analytical Hierarchy Process”, International Journal of Enterprise Network Management, Vol. 3, No. 4, 374- 394, 2009.

Wazed

"Effects of Process Commonalities in Production System under Various Uncertain Factors", Proceedings of the International Conference for Technical Postgraduates, (TECHPOS 2009), Art. No. 5412118, Kuala Lumpur, Malaysia, December 14-15, 2009.

Cohen

“Automatic Translation of a Process Level Petri-Net to a Ladder Diagram”, Journal of Communication and Computer,Vol. 6, No. 11, 58-63, 2009.

Wang

“A Closed-Loop Logistic Model with a Spanning-Tree based Genetic Algorithm”, Computers and Operations Research, Vol. 37, No. 2, 376-389, 2010.

Georgiadis

“The Impact of Two-Product Joint Lifecycles on Capacity Planning of Remanufacturing Networks”, European Journal of Operational Research, Vol. 202, No. 2, 420-433, 2010.

Jahan

“Material Screening and Choosing Methods - A Review”, Materials and Design, Vol. 31, No. 2, 696-705, 2010.

Ho

“Integrated Component Scheduling Models for Chip Shooter Machines”, International Journal of Production Economics, Vol. 123, No. 1, 31-41, 2010.

Ilgin

“Environmentally Conscious Manufacturing and Product Recovery (ECMPRO): A Review of the State of the Art”, Journal of Environmental Management, Vol. 91, No. 3, 563-591, 2010.

Shah

“A Machine Learning Approach to Optimise the Usage of Recycled Material in a Remanufacturing Environment”, International Journal of Production Research, Vol. 48, No. 4, 933-955, 2010.

Moran

"A Simulation Study of Economic Production Quantity Lot Size to Kanban for a Single Line Production System under Various Setup Times with Annual Setup Cost as Performance Metric", Proceedings of the International College Teaching and Learning (ITLC) Conference and the International Applied Business Research (IABR) Conference, Orlando, Florida, January 4-6, 2010.

Anand

“Development of a Framework for Implementation of Lean Manufacturing Systems”, International Journal of Management Practice, Vol. 4, No. 1, 95-116, 2010.

Raduly-Baka

“Construction of Component Tapes for Radial Placement Machines”, Computers and Operations Research, Vol. 37, No. 8, 1488-1499, 2010.

Mottonen

“Applying Design for Sustainability in an ICT Company”, International Journal of Sustainable Economy, Vol. 2, No. 2, 180-193, 2010.

Kilincci

“A Petri Net-Based Heuristic for Simple Assembly Line Balancing Problem of Type 2”, International Journal of Advanced Manufacturing Technology, Vol. 46, No. 1-4, 329-338, 2010.

Faria

“Cost and Quality of Service Analysis of Production Systems Based on the Cumulative Downtime”, International Journal of Production Research, Vol. 48, No. 6, 1653-1684, 2010.

Gonzales

“Integrated Eco-Design Tool for Malaysian Automobile Industry”, Journal of Advanced Computational Intelligence and Intelligent Informatics, Vol. 14, No. 1, 46-54, 2010.

Pineyro

“The Economic Lot-Sizing Problem with Remanufacturing and One-Way Substitution”, International Journal of Production Economics, Vol. 124, No. 2, 482-488, 2010.

Azadeh

“A Hybrid GA-Simulation Approach to Improve JIT Systems”, International Journal of Production Research, Vol. 48, No. 8, 2323-2344, 2010.

Luh

“Data Management of Green Product Development with Generic Modularized Product Architecture”, Computers in Industry, Vol. 61, No. 3, 223-234, 2010.

Tuncel

“Risk Assessment and Management for Supply Chain Networks: A Case Study”, Computers in Industry, Vol. 61, No. 3, 250-259, 2010.

Saman

“Strategic Guidance Model for Product Development in Relation with Recycling Aspects for Automotive Products”, Journal of Sustainable Development, Vol. 3, No. 1, 142-158, 2010.

Li

“Environmental Friendly Automatic Line for Recovering Metal from Waste Printed Circuit Boards”, Environmental Science and Technology, Vol. 44, No. 4, 1418-1423, 2010.

Zarei

“Designing a Reverse Logistics Network for End-of-Life Vehicles Recovery”, Mathematical Problems in Engineering, Vol. 2010, No. 649028, 1-16, 2010.

Yang

“Optimization and Sensitivity Analysis of Controlling Arrivals in the Queueing System with Single Working Vacation”, Journal of Computational and Applied Mathematics, Vol. 234, No. 2, 545-556, 2010.

Collado-Ruiz

“Modularity and Ease of Disassembly: Study of Electrical and Electronic Equipment”, Journal of Mechanical Design, Paper No. 014502, Vol. 132, No. 1, 1-4, 2010.

Massoud

"Preemptive Goal Programming for Solving the Multi-Criteria Disassembly-To-Order Problem under Stochastic Yields, Limited Supply, and Quantity Discount", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 415-420, March 26-28, 2010.

Massoud

"Linear Physical Programming for Solving the Multi-Criteria Disassembly-To-Order Problem under Stochastic Yields, Limited Supply, and Quantity Discount", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 474-479, March 26-28, 2010.

Ilgin

"An Evaluation of the Effect of Sensor Embedded Products in Product Disassembly with Precedence Relationships", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 409-414, March 26-28, 2010.

Ilgin

"Disassembly of Sensor Embedded Products with Component Discriminating Demand", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 427-432, March 26-28, 2010.

Ondemir

"An Optimization Framework for Advanced Disassembly/Repair-To-Order Systems with Remaining-Life Adjustment", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 421-426, March 26-28, 2010.

Johar

"System Dynamics Approach in Inventory Management of End-Of-Life Products in a Disassembly Line", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 445-449, March 26-28, 2010.

Nakashima

"Analysis of Remanufacturing Policy with Consideration for Returned Products Quality", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 486-491, March 26-28, 2010.

ElSayed

"A Genetic Algorithm Approach to End-Of-Life Disassembly Sequencing for Robotic Disassembly", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 402-408, March 26-28, 2010.

Yamada

"A Modeling of Disassembly systems with Reverse Blocking Considering Traffic and Buffer Capacities in Sorting Process", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 433-438, March 26-28, 2010.

Aksoy

"Bayesian Updating of Recovery Rate Distribution", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 480-485, March 26-28, 2010.

Chen

"The Flexible Delivery and Pickup Problem with Time Windows", Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, pp. 462-467, March 26-28, 2010.

Kang

“Automatic Derivation of Transition Matrix for End-Of-Life Decision Making”, International Journal of Production Research, Vol. 48, No. 11, 3269-3298, 2010.

Tseng

“A Particle Swarm Optimisation Algorithm for Multi-Plant Assembly Sequence Planning with Integrated Assembly Sequence Planning and Plant Assignment”, International Journal of Production Research, Vol. 48, No. 10, 2765-2791, 2010.

Lage Jr.

“Variations of the Kanban System: Literature Review and Classification”, International Journal of Production Economics, Vol. 125, No. 1, 13-21, 2010.

Majumdar

“Selection of Raw Materials in Textile Spinning Industry using Fuzzy Multi-Criteria Decision Making Approach”, Fibers and Polymers, Vol. 11, No. 1, 121-127, 2010.

Ke

“Controlling Arrivals for a Markovian Queueing System with a Second Optional Service”, International Journal of Industrial Engineering, Vol. 17, No. 1, 48-57, 2010.

Tsoulfas

"Applying Web-Based Collaborative Decision-Making in Reverse Logistics: The Case of Mobile Phones", in Web Technologies: Concepts, Methodologies, Tools, and Applications, Edited by Arthur Tatnall, IGI Global Publication, USA, pp. 724-738, Chapter 3.4, ISBN: 978-1-60566-982-3, 2010.

Su

"System Dynamics Modeling for Strategic Management of Green Supply Chain", in Strategic Information Systems: Concepts, Methodologies, Tools, and Applications, Edited by M. Gordon Hunter, IGI Global Publication, USA, pp. 2617-2649, Chapter 8.13, ISBN: 978-1-60566-677-8, 2010.

Banik

“Analysis of Single Working Vacation in GI/M/1/N and GI/M/1/8 Queueing Systems”, International Journal of Operational Research, Vol. 7, No. 3, 314-333, 2010.

Tseng

“A Multi-Plant Assembly Sequence Planning Model with Integrated Assembly Sequence Planning and Plant Assignment using GA”, International Journal of Advanced Manufacturing Technology, Vol. 48, No. 1-4, 333-345, 2010.

Vinodh

“Integration of ECQFD and LCA for Sustainable Product Design”, Journal of Cleaner Production, Vol. 18, No. 8, 833-842, 2010.

Stanciulescu

“How to Implement an Effective Environmental Management Using the Reverse Supply Chains”, Metalurgia International, Vol. 15, Special Issue No. 3, 59-65, 2010.

Millbank

"Consumption to Contribution: Sustainable Technological Development Through Innovation", in Mechatronics in Action, Edited by David Bradley and David W. Russell, Springer-Verlag, London, pp. 19-42, Chapter 2, ISBN: 978-1-84996-079-3, 2010.

Oteng-Ababio

“E-Waste: An Emerging Challenge to Solid Waste Management in Ghana”, International Development Planning Review, Vol. 32, No. 2, 191-206, 2010.

de Brito

“Supply Chain Management and Sustainability: Procrastinating Integration in Mainstream Research”, Sustainability, Vol. 2, No. 4, 859-870, 2010.

Galbreth

“Optimal Acquisition Quantities in Remanufacturing with Condition Uncertainty”, Production and Operations Management, Vol. 19, No. 1, 61-69, 2010.

Hnaien

“Multi-Objective Optimization for Inventory Control in Two-Level Assembly Systems under Uncertainty of Lead Times”, Computers and Operations Research, Vol. 37, No. 11, 1835-1843, 2010.

Kuo

“Combination of Case-Based Reasoning and Analytical Hierarchy Process for Providing Intelligent Decision Support for Product Recycling Strategies”, Expert Systems with Applications, Vol. 37, No. 8, 5558-5563, 2010.

Wu

“A Solution Method for the Component Allocation Problem in Printed Circuit Board Assembly”, Assembly Automation, Vol. 30, No. 2, 155-163, 2010.

Vinodh

“Improvement of Agility and Sustainability: A Case Study in an Indian Rotary Switches Manufacturing Organisation”, Journal of Cleaner Production, Vol. 18, No. 10-11, 1015-1020, 2010.

Haji

“A Semigroup Approach to the System with Primary and Secondary Failures”, International Journal of Mathematics and Mathematical Sciences, Vol. 2010, No. 201682, 1-33, 2010.

Vijaya Laxmi

“A Renewal Input Accessible and Non-Accessible Batch Service Queue with Servers’ Vacation”, Far East Journal of Applied Mathematics, Vol. 39, No. 2, 113-138, 2010.

Lie

Lie, K. T. H., "Cradle to Cradle: Incorporating Closed-Loop Material Chains in the Industry", Master's Thesis, (Advisors: Dr. Astrid Hamer and Prof. Rommert Dekker), Erasmus University Rotterdam, The Netherlands, 2010.

Takahashi

“Adaptive Kanban Control Systems for Two-Stage Production Lines”, International Journal of Manufacturing Technology and Management (IJMTM), Vol. 20, No. 1-4, 75-93, 2010.

Kara

“A Two-Stage Stochastic and Robust Programming Approach to Strategic Planning of a Reverse Supply Network: The Case of Paper Recycling”, Expert Systems with Applications, Vol. 37, No. 9, 6129-6137, 2010.

Lei

“Production Line Simulation using STPN for Maintenance Scheduling”, Journal of Intelligent Manufacturing, Vol. 21, No. 2, 213-221, 2010.

Ilgin

“Book Review of "Environment Conscious Manufacturing" edited by Gupta, S. M. and Lambert, A. J. D.”, International Journal of Production Research, Vol. 48, No. 14, 4325-4326, 2010.

Tseng

“Disassembly-Oriented Assessment Methodology for Product Modularity”, International Journal of Production Research, Vol. 48, No. 14, 4297-4320, 2010.

Kongar

"The Promise of the Real-Time Supply Chain", in The Handbook of Technology Management, Volume 2: Supply Chain Management, Marketing and Advertising, and Global Management, Edited by Hossein Bidgoli, Wiley, pp. 265-273, Chapter 19, ISBN: 978-0-470-24948-2, 2010.

Karakayal

“Pricing and Recovery Planning for Demanufacturing Operations with Multiple Used Products and Multiple Reusable Components”, Computers and Industrial Engineering, Vol. 59, No. 1, 55-63, 2010.

Chiu-Wei

Chiu-Wei, C. C., "Economics of Cost of Quality for Green Manufacturing Life Cycle Assessment Approach", PhD Thesis, (Advisors: Drs. M. G. Beruvides and J. L. Simonton), Department of Industrial Engineering, Texas Tech University, 2010.

Ghezavati

“Designing Integrated Cellular Manufacturing Systems with Scheduling Considering Stochastic Processing Time”, International Journal of Advanced Manufacturing Technology, Vol. 48, No. 5-8, 701-717, 2010.

Ding

“A New Multi-Objective Ant Colony Algorithm for Solving the Disassembly Line Balancing Problem”, International Journal of Advanced Manufacturing Technology, Vol. 48, No. 5-8, 761-771, 2010.

Behdad

“Simultaneous Selective Disassembly and End-of-Life Decision Making for Multiple Products that Share Disassembly Operations”, Journal of Mechanical Design, Paper No. 041002, Vol. 132, No. 4, 1-9, 2010.

Cohen

"Automatic Translation of a Process Level Petri-Net to a Ladder Diagram", in Advanced Techniques in Computing Sciences and Software Engineering, Edited by Khaled Elleithy, Springer Science, pp. 25-29, Chapter 5, ISBN: 978-90-481-3659-9, 2010.

Wazed

“A Review of Manufacturing Resources Planning Models under Different Uncertainties: State-of-the-Art and Future Directions”, South African Journal of Industrial Engineering, Vol. 21, No. 1, 17-33, 2010.

Heizer

"Operations Management", (p. 577), 10th Edition, Prentice Hall, New Jersey, 2011.