bookS_01
Thesis
  • The Transient Foil Bearing Problem in Magnetic Recording, (pdf) Ph.D. Thesis, Department of Mechanical Engineering, University of Rochester, April 1994. Advisor: Richard C. Benson
  • Investigation of Stress History in Extrusion by the Finite Element Method, M.S. Thesis, Department of Mechanical Engineering, METU, Ankara, Turkey, December 1989. Advisor: A. Erman Tekkaya
Patents
  • Contact Sheet Recording with a Negative Air Bearing, US Pat.. 6,118,626, Sept., 2000. (pdf)
  • Helical Scan Recording with a Self-Acting Neg. Air Bairing, US Pat.: 6,151,191, Nov. 2000. (pdf)
Book
  1. Finite Element Method: Physics and Solution Methods, S. Müftü, Academic Press, in press, 2022.
Book & Encyclopedia Chapters
  1. Engineering Aspects of Bicon Implants S. Irandoust, J. Lehrberg, V. Morgan and S. Müftü, The Bicon Short Implant. Editor: V. Morgan, Quintessence Publishing, 2017.
  2. Load Transfer along the Bone-Implant Interface and its Effects on Bone Maintenance, S. Faegh, H.-Y. Chou and S. Muftu, Dental Implants, Editor: Ilser Turkyilmaz, Intech Publishing, pp. 163-190, July 2011.
  3. Biomechanics of Tooth and Jaw, S. Müftü, A. Müftü, Encyclopedia of Medical Devices and Instrumentation. Editor: J.G. Webster, John Wiley & Sons, NY, pp. 411-428, 2006.
Publications in the Refereed Journals
  1. Effect of substrate surface finish and particle velocity on fatigue performance of cold spray coated A6061 aluminum alloy, A. Nourian-Avval and S. Müftü, Surface & Coatings Technology, accepted for publication, June 2022.
  2. Evaluation of the Fatigue Behaviour and Failure Mechanisms of 52100 Steel Coated with WIP-C1 (Ni/CrC) by Cold Spray, V. Goanta, C. Munteanu, S. Müftü, B. Istrate, P. Schwartz, S. Boese, G. Ferguson and C. I. Moraras, Materials, vol. 15., p. 3609, 2022, https://doi.org/10.3390/ma15103609.
  3. Bulk fracture anisotropy in Cold-Sprayed Al 6061 deposits, S. Julien, A. Nourian-Avval, Wentao Liang, T. Schwartz, O.C. Ozdemir, S. Müftü, Engineering Fracture Mechanics, Vol. 263, 2022, https://doi.org/10.1016/j.engfracmech.2022.108301.
  4. Extreme Tribological Characteristics of Copolymers Induced by Dynamic Rheological Instability, A. Kim, S. Müftü, E.L. Thomas, J-H Lee, ACS Applied Polymer Materials, Vol. 3, pp. 4413-4418, 2021 DOI: 10.1021/acsapm.1c00423
  5. Particle Velocimetry, CFD, and the Role of Particle Sphericity in Cold Spray, O. C. Ozdemir, J. M. Conahan, S. Müftü, Coatings, 10, 1254, 2020, https://doi.org./10.3390/coatings10121254
  6. High Rate Deposition in Cold Spray, O.C. Ozdemir, P. Schwartz, S. Müftü, F.C. Thompson, G.A. Crawford, A.T. Nardi, V.K. Champagne, C.A. Widener, Journal of Thermal Spray Technology, Vol. 30, pp. 344 - 357, 2021.
  7. Elastic Impact of a Spherical Particle with a Long, Stationary, Fixed Timoshenko Beam R. Zhang, S. Müftü, Journal of Sound and Vibration, Vol 495, https://doi.org/10.1016/j.jsv.2020.115892, 2021.
  8. The mechanistic aspects of microbial transport in porous media, J. Sun, R. Ran, S. Müftü, A.Z. Gu, K.-T. Wan, Colloids and Surfaces A, Vol. 603, 2020, doi.org/10.1016/j.colsurfa.2020.125169.
  9. Thermo-mechanical deformation history and the residual stress distribution in cold spray, E. Lin, I. Nault, O.C. Ozdemir, V.K. Champagne, Jr., A. Nardi, S. Müftü, Journal of Thermal Spray Technology, Vol. 29, pp. 1424–1436, 2020.
  10. The interplay between bone healing and remodeling around dental implants, S. Irandoust and S. Müftü, Scientific Reports, 10, 4335, 2020, doi.org/10.1038/s41598-020-60735-7.
  11. Dynamic strengthening of carbon nanotube fibers under extreme mechanical impulse, W. Xie, R. Zhang, R. J. Headrick, L. Taylor, S. E Kooi, M. Pasquali, S. Müftü, J.-H.Lee, Nano Letters, Vol. 19, pp. 3519-3526, 2019.
  12. Microstructural Characterization of Aluminum 6061 Splats Cold Spray Deposited on Aluminum 6061-T6 Substrate, W.C. Evans, X. Dan, A. Houshmand, S. Müftü, T.Ando, Metallurgical and Materials Transactions A, Vol. 50, pp. 3937–3948 https://doi.org/10.1007/s11661-019-05303-z, 2019.
  13. Effects of Interface Bonding on the Residual Stresses in Cold-Sprayed Al-6061: A Numerical Investigation, E. Lin, Q. Chen, O.C. Ozdemir, V.K. Champagne, S. Müftü, Journal of Thermal Spray Technology, Vol. 28, pp. 472-483, 2019.
  14. Modeling the Continuous Heat Generation in the Cold Spray Coating Process, O.C. Ozdemir, Q. Chen, S. Müftü, V.K. Champagne, Journal of Thermal Spray Technology, Vol. 28, pp. 108-123, 2019.
  15. Adhesion of a Solid Elastic Sphere onto a Rigid Planar Substrate in the Presence of Moisture, J. Sun, A. Gu, S. Müftü, K.T. Wan, Journal of Applied Mechanics, Vol. 85, 061009, 2018.
  16. Measuring Particle Adhesion-Detachment and Filtration Efficiency by Microfluidics, J. Sun, N. Tandogan, A. Gu, S. Müftü, E.D. Goluch, K.T. Wan, Colloids and Surfaces B: Interfaces,2018, Vol. 165, pp. 381-387.
  17. High Strain Rate Material Behavior and Adiabatic Material Instability in Impact of Micron-Scale Al-6061 Particles, Q. Chen, A. Alizadeh-Dehkharghani, W. Xie, X. Wang, V. Champagne, A.Gouldstone, J.-H. Lee, S. Müftü, Journal of Thermal Spray Technology, Vol. 27, pp. 641-653, 2018, doi.org/10.1007/s11666-018-0712-4
  18. One-Dimensional Constrained Blister Test to Measure Thin Film Adhesion, T. Zhu, S. Müftü, K.-T. Wan, Journal of Applied Mechanics, 2018, Vol. 85, p.0545010-1, doi.10.1115/1.4039171
  19. Contact Mechanics of a Thin, tensioned, translating tape with a grooved roller, T. Kasikci,, M.-C. Weng, A. Nayak, T. Goker, S. Müftü, Journal of Tribology, Vol. 140 / 011405-1, January 2018.
  20. Rebound Mechanics of Micrometre-Scale, Spherical Particles in High Velocity Impacts, B. Yildirim, H. Yang, A. Gouldstone, S. Müftü, Proceedings of the Royal Society of London, A 473: 20160936, 2017.
  21. Dynamics and extreme plasticity of metallic microparticles in supersonic collisions, W. Xie, A. Alizadeh-Dehkharghani, Q. Chen, V.K. Champagne, X. Wang, A. Nardi, S. Kooi, S. Müftü, J.-H. Lee, Scientific Reports, doi:10.1038/s41598-017-05104-7, 2017.
  22. Revisiting the constrained blister test to measure thin film adhesion, T. Zhu, G. Li, S. Müftü, K.-T. Wan, Journal of Applied Mechanics, Vol. 84, No. 7, doi:10.1115/1.4036819, 2017.
  23. Model-based Optimal Planning of Hepatic Radiofrequency Ablation, 2. Q. Chen, F.C. Meral, S. Müftü, M. Akcakaya, K. Tuncali, Mathematical Medicine and Biology, Vol. 34, Issue 3, 1, pp. 415–431 September 2017.
  24. Lateral Friction Behavior of a Thin, Tensioned Tape Wrapped over a Grooved-Roller: Experiments and Theory, H. Yang, J. B. C., Engelen, W.A. Haberle, M. Lantz, S. Müftü, 139 (2), 021605, 2017.
  25. Indentation of Polytetrafluoroethylene (PTFE) Thin-Film: Simulations by Using Continuum Damage Mechanics, Q. Sheng, A. J. White, S. Müftü, Tribology Transactions, Vol 60, No.1 pp. 114-120, 2017.
  26. Removal force ratio in conical implant-abutment interfaces. Influence of preload, taper mismatch, wait time and presence of saliva. J. Aguirrebeitia, S. Müftü, M. Abasolo, J. Vallejo, Journal of Prosthetic Dentistry, submitted October 2015, accepted July 2016.
  27. Interfacial Delamination of Thin-Film PTFE (Polytetrafluoroethylene) Coatings, Q. Sheng, A. J. White, S. Müftü, The Journal of Adhesion, 10.1080/00218464.2016.1170603, 2016.
  28. Wrap Pressure between a Flexible Web and a Circumferentially Grooved Cylindrical Guide, T. Kasikci and S. Müftü, Journal of Tribology, Trans ASME, Vol. 138, p. 031101-1, 2016.
  29. An experimental study of friction and durability of a thin PTFE-film on rough aluminum substrates, Q. Sheng, A. J. White, S. Müftü, Tribology Transactions, Vol. 59, No. 4, pp 632-640, 2016.
  30. Mechanics of Lateral Positioning of a Translating Tape due to Tilted Rollers: Theory and Experiments, H. Yang, J. B. C. Engelen, A. Pantazi, W. Häberle, M. A. Lantz, S. Müftü, International Journal of Solids and Structures, Vol. 66, pp. 88-97, 2015.
  31. Influence of Mastication and Edentulism on Mandibular Bone Density, H.Y. Chou, D. Satpute, A. Müftü, S. Mukundan, S. Müftü, Computer Methods in Biomechanics and Biomedical Engineering, Vol. 18, No.3, pp. 269-281, 2015.
  32. A numerical investigation into cold spray bonding processes, Yildirim, H. Fukanuma, T. Ando, A. Gouldstone and S. Müftü, Journal of Tribology, Trans. ASME, Vol. 137, No. 1, pp. 935-942, 2015.
  33. Detecting Solid Masses in Phantom Breast Using Mechanical Indentation, L. Sallaway, Magee, S., Shi, J., Lehmann, O., Quivira, F., Tgavalekos, K., Brooks, D.H., S. Müftü, Meleis, W., Moore, R.H., Kopans, D., Wan, K.T., Experimental Mechanics, Vol. 54, No. 6, pp. 935-942, 2014.
  34. A Method for the Estimation of Interface Temperature in Ultrasonic Joining, T. Hu, S. Zhalehpour, A. Gouldstone, S. Müftü, T. Ando, Metallurgical and Materials Transactions A, Vol. 45A, No.3, pp. 2545-2552, 2014.
  35. The effect of different implant-abutment connection on screw joint stability, K., Michalakis, P. Calvani, S. Müftü, A. Pissiotis, and H. Hirayama, H., Journal of Oral Implantology, Vol 40, No.2 pp. 146-152, 2014
  36. Experimental study of the removal force in conical implant-abutment interfaces, J. Aguirrebeitia, S. Müftü, M. Abasolo, J. Vallejo, Journal of Prosthetic Dentistry, Vol. 111, No. 4, pp. 293-300, 2014.
  37. Simulation of Peri-Implant Bone Healing Due to Immediate Loading in Dental Implant Treatments, H.Y. Chou, S. Müftü, Journal of Biomechanics, Vol. 46, No. 5, pp. 871-878, 2013.
  38. Adhesion of a Cylindrical Shell in the Presence of DLVO Surface Potential, J. Shi, S. Müftü, A.Z. Gu, K.T. Wan, Journal of Applied Mechanics, Vol. 80, 061007, November 2013.
  39. Peri-Implant Bone Remodeling around a Fresh Extraction Socket: Predictions of Bone Maintenance by Finite Element Method, Chou, H-S, G. Romanos, A. Müftü, S. Müftü, International Journal of Oral and Maxillofacial Implants, accepted Jan. 2012
  40. Adhesion of a compliant cylindrical shell onto a rigid substrate, J. Shi, S. Müftü, K.T. Wan, Journal of Applied Mechanics, accepted, June 2011.
  41. Impact of High Velocity Particles onto a Rough Surface, B. Yildirim, S. Müftü, International Journal of Solids and Structures, Vol. 49, pp. 1375-1386, 2012.
  42. Deformation of a Convex Hydrogel Shell by Parallel Plate and Central Compression,2. J. Shi, M. Robitaille, S. Müftü, K-T Wan, Journal of Experimental Mechanics, DOI 10.1007/s11340-011-9514-z, June 2011.
  43. Adhesion of an Elastic Convex Shell onto a Rigid Plate, 3. J. Shi, S. Müftü, K-T Wan, Journal of Adhesion, 87(6), pp. 579 - 594, 2011.
  44. Modeling of High Velocity Impact of Spherical Particles, B. Yildirim, S. Müftü, A. Gouldstone, Wear, Vol. 270(9-10), pp. 703-713, 2011.
  45. The fluid structure interactions between a tensioned web and an externally pressurized hollow drum, E. Lopez, S. Müftü, Journal of Fluids and Structures, Vol. 27, pp. 487-502, 2011.
  46. Frictional characteristics of ultra-thin polytetrafluroethylene (PTFE) films deposited by hot filament- chemical vapor deposition (HFCVD), M.A. Karnath, Q. Sheng, A.J. White, S. Müftü, STLE Tribology Transactions, 54, Vol. 36-43, 2011.
  47. Vibration of thin, tensioned, helically wrapped plates, E. Lopez, S. Müftü, Journal of Sound and Vibration, Vol. 330(4), pp. 685-702, 2011.
  48. A comparative evaluation of implant length and diameter on peri-implant bone strain distribution, H.-Y. Chou, D. Bozkaya, S. Müftü, Journal of Prosthetic Dentistry, Vol. 104(5), pp. 293-300, 2010.
  49. Load transfer along the bone-dental implant interface, S. Faegh, S. Müftü, Journal of Biomechanics, Vol. 43, pp. 1761-1770, 2010. (pdf)
  50. Effects of surface forces on material removal rate in chemical mechanical planarization, Journal of the Electrochemical Society, Vol. 157(3) H287-296, 2010.(pdf)
  51. A Material Removal Model for CMP based on the contact mechanics of pad, abrasives and wafer, D. Bozkaya, S. Müftü, Journal of the Electrochemical Society, Vol. 156(12), H890-902, 2009.(pdf)
  52. Nanomechanical characterization of the triple beta-helix domain in the cell puncture needle of bacteriophage T4 virus, S. Keten, J.F.R. Alvarez, S. Müftü, M. Buehler, Cellular and Molecular Bioengineering, Vol. 2(1), pp. 66-74, 2009. (pdf)
  53. Investigation of Chemical/Mechanical Polishing of Niobium, G. Calota, N. Maximova, K. Ziemer, S. Müftü, STLE Tribology Transactions, Vol 52(4), pp. 447-459, 2009.(pdf)
  54. Mechanical and Electrical Evaluation of Parylene-C Encapsulated Carbon Nanotube Networks on a Flexible Substrate, C.-L. Chen, E. Lopez, Y.-J. Jung, S. Selvarasah, S. Müftü, M. Dokmeci, Applied Physics Letters, accepted for publication, July 2008. (pdf)
  55. The Effects of Interfacial Particles on the Contact of an Elastic Sphere with a Rigid Flat Surface, D. Bozkaya and S. Müftü, ASME Journal of Tribology,October 2008.(pdf)
  56. Predictions of Bone Remodeling Around Dental Implant Systems, H-Y Chou, J.J. Jagodnik, and S. Müftü, Journal of Biomechanics, 41(6), pp. 1365-1373, 2008.(pdf)
  57. Lateral Vibration of Two Axially Translating Beams Interconnected by Winkler Foundation, M. Gaith and S. Müftü, Journal of Vibration and Acoustics, Trans. ASME, 129, pp. 80-385, 2007.(pdf)
  58. Mechanics of a thin, tensioned-shell, wrapped helically around a turn-bar, S. Müftü, Journal of Fluids and Structures, 23, 767-785, 2007.(pdf)
  59. Adhesion in the contact of a spherical indenter with a layered elastic half-space, A.O. Sergici, G.G. Adams, S. Müftü, Journal of the Mechanics and Physics of Solids, Vol. 54, No. 9, 2006, pp. 1843-1861.
  60. Contact Scanning Mode AFM for Nanomechanical Testing, P. J., Ryan, G.G. Adams, N. E. McGruer, S. Müftü, Journal of Micromechanics and Microengineering, Vol. 16, No. 5, 2006, pp. 1040-1046..
  61. Stability of an accelerating string subjected to frictional guiding forces, G. Zen and S. Müftü, Journal of Sound and Vibration, Vol. 289, pp. 551-576, 2006. (pdf)
  62. Mechanics of Thin, Flexible, Translating Media and Their Interactions with Surrounding Air,  S. Müftü, JSME  International  Journal  special issue “Frontier of Research and Development  of  Information Devices  in the Pacific Rim,” Vol. 48, No. 3, pp. 329-336, 2005.
  63. An adaptive finite element strategy for analysis of air lubrication in the head-disk interface of a hard disk drive, P. Holani and S. Müftü, (Invited), Revue Européenne des Élément Finis, Vol. 14, No. 2-3, pp. 155-180, 2005.(pdf)
  64. Improvements to a scale dependent model for contact friction, , G.G. Adams and S. Müftü, Journal of Physics: D Applied Physics, Vol. 38, pp. 1402-1409, 2005.(pdf)
  65. Mechanics of the Taper Integrated Screwed-In (TIS) Abutments Used in Dental Implants, D. Bozkaya and S. Müftü, Journal of Biomechanics, Vol. 38, pp 87-97, 2005. (pdf)
  66. Efficiency Considerations for the Purely Tapered Interference Fit (TIF) Abutments Used in Dental Implants, D. Bozkaya and S. Müftü, Journal of Biomechanical Engineering, Trans ASME, Vol. 126, pp. 393-401, 2004.(pdf)
  67. Evaluation of Load Transfer Characteristics of Five Different Implants in Compact Bone at Different Load Levels by Finite Element Analysis, D. Bozkaya, S. Müftü, A. Müftü, The Journal of Prosthetic Dentistry, Vol. 92/6 pp 523-530, 2004.(pdf)
  68. Traction between a web and a smooth roller, S. Müftü and J. J. Jagodnik, ASME Journal of Tribology, Vol. 126, No. 1, pp. 177-184, 2004. (pdf)
  69. Nano-Scale Effects in the Adherence, Sliding and Rolling of a Cylinder on a Substrate, Ö. T. Sari, G. G. Adams and S. Müftü, Journal of Applied Mechanics, Trans. ASME, accepted 2004. (text-pdf, figures-pdf, )
  70. Mechanics of the tapered interference fit in dental implants, Dinçer Bozkaya and Sinan Müftü, Journal of Biomechanics, Vol. 36, No. 11, pp. 1649-1658, November 2003. (pdf)
  71. A nano-scale multi-asperity contact and friction model, G. G. Adams, S. Müftü and N. Mohd Azhar, ASME Journal of Tribology, Vol. 125, pp. 700-708, 2003 (pdf)
  72. Tape mechanics over a flat recording head under uniform pull-down pressure, S. Müftü , Journal of Microsystem Technologies, Vol. 9, No.8, October, 2003, pp. 546-554.(pdf)
  73. A model for determing the asperity engagement height in relation to web traction over non-vented rollers, B.S. Rice, K.A. Cole, S. Müftü, ASME Journal of Tribology, Vol. 124, No. 3, pp. 584-594, 2002. (pdf)
  74. Measurements and Theoretical Predictions of Head/Tape Spacing over a Flat Head, S. Müftü, Donna Jean Kaiser, Tribology International, Vol. 33, pp. 415-430, 2000.
  75. Flat-Heads for Contact Tape Recording: Performance Measurements at Different Wrap Angles, Tape Tension, Speed and Stiffness, H.F. Hinteregger, S. Müftü, Journal of Information and Processing Systems, Vol. 2, pp. 75-82, 2000.
  76. Mechanics of a Porous Web Moving Over a Rigid Guide, S. Müftü, M.C. Altan, Journal of Tribology, Vol. 122, pp. 418-426, 2000. (pdf)
  77. The Natural Contour of a Tape-Lapped Recording Head: A Theoretical and Experimental Investigation S. Müftü, G..E. Hall, D.J. Kaiser, Alan E..E. Rogers, Maria-Isabel Carnasciali Journal of Information and Processing Systems, Vol. 1, pp. 287-298, 1999.
  78. The Fluid/Structure Interaction of a Thin Flexible Cylindrical Web Supported by an Air Cushion, S. Müftü, K.A. Cole, Journal of Fluids and Structures, Vol. 13, pp. 681-708, 1999. ..(pdf)
  79. A Two Dimensional Model of the Fluid Dynamics of an Air Reverser, S. Müftü, T.S. Lewis, K.A. Cole, R.C. Benson, Journal of Applied Mechanics, Trans. ASME, Vol. 65, No. 1 pp. 171-177, March 1998. ..(pdf)
  80. The Self-Acting, Subambient Foil Bearing in High Speed, Contact Tape Recording with a Flat Head, S. Müftü, H.F. Hinteregger, STLE Tribology Transactions, Vol. 41, No. 1, pp. 19-26, 1998.
  81. Contact Tape Recording with a Flat Head Contour, H.F. Hinteregger, S. Müftü, IEEE Transactions on Magnetics, pp. 3476-3478, September 1996.
  82. A Study on Width-Wise Variations in the Two Dimensional Foil Bearing Problem, S. Müftü, R.C. Benson, Transactions of the ASME, Journal of Tribology, Vol. 118, No.2, pp. 407-414, 1996. (pdf)
  83. VideoTape Behavior On Rotary Heads: Modeling and Results, S. Müftü, R.C. Benson, JAST Tribologists Journal, December 1995 (in Japanese).
  84. A Numerical Solution to Transient Displacement of a Circumferentially Moving Cylindrical Shell, S. Müftü, R.C. Benson, "Journal of Vibration and Acoustics, Vol. 116, No. 4, pp. 567-572, 1994. (pdf)
  85. A Numerical Simulation of Tape Dynamics in Helical-Scan Recording, S. Müftü, R.C. Benson, IEEE Transactions on Magnetics, vol. 29, no. 6, November 1993.
  86. On the Elastic-Plastic Shrink Fit with Supercritical Interference, U. Gamer, S. Müftü, ZAMM, Vol. 70, No. 11, 501-507, 1990.
Publications in Conference Proceedings:
  1. Mechanics of Tape Contact with Circumferentially Grooved Cylindrical Rollers: Experiments and Modelling, T. Kasikci, H. Yang, E.K. Kim, C. Janssen, S. Müftü, Proceedings of the 26th Annual Conference on Information Storage and Processing Systems ISPS2016 June 20-21, 2016, Santa Clara, California, USA, ISPS2016-9581.
  2. Pre-treatment Planning for Hepatic Radiofrequency Ablation, Q. Chen, S. Müftü, F.C. Meral, K. Tuncali, M. Akcakaya, IEEE Signal Processing in Medicine and Biology Symposium, December 12, 2015, Temple University, Philadelphia, Pennsylvania.
  3. Computer Simulation of Dental implant Treatments: Long-Term Behavior S. Irandoust, S. Müftü, Northeast Bioengineering Conference, Troy, NY, April 17-19, 2015
  4. Thin Tape Traction Over a Grooved Roller, T. Kasikci and S. Müftü, Proceedings of the 13th International Conference on Web Handling, IWEB-2015, Oklahoma State University, Stillwater, OK, June 8-10, 2015.
  5. Assessment of Interface Energy in High Velocity Particle Impacts S. Müftü, S. Zhalehpour, A. Gouldstone, and T. Ando, Proceedings of the 38th Annual Meeting, The Adhesion Society February 20-25, 2015, Savannah, GA
  6. Coupling between the in-plane and lateral tape dynamics in high capacity linear tape transport systems, H. Yang and S. Müftü, invited session on “Servo Control Technologies for Data Storage” in The 19th World Congress of the International Federation of Automatic Control, Cape Town, South Africa, 24-29 August 2014.
  7. Soguk sprey (cold spray) isleminde çoklu parçacik çarpismasi ve kaplama özelliklerinin sayisal ve deneysel yöntemlerle incelenmesi, B. Yildirim, A. Hulton, S.A. Alavian, T. Ando, A. Gouldstone, S. Müftü, in proceedings of SAVTEK 2014, SAVTEK, June 25-27, 2014, Middle East Technical University, Ankara, Turkey (in Turkish).
  8. On coupled dynamics of frictional guides in tape transport systems, H.Yang and S. Müftü, Proceedings of the 24th Annual Conference on Information Storage and Processing Systems ISPS2014 June 16-17, 2014, Santa Clara, California, USA.
  9. Tape mechanics over a grooved roller: Experiments and theory, T. Kasikci, S. Müftü, Proceedings of the 24th Annual Conference on Information Storage and Processing Systems ISPS2014 June 16-17, 2014, Santa Clara, California, USA.
  10. Model for Attachment-Detachment Mechanics of E. coli Bacteria in the Presence of Surface Forces, K. Bausemer, S. Müftü and K.-T. Wan, Proceedings of the 37th Annual Meeting of the Adhesion Society, Daytona Beach, FL, February 24-27, 2014.
  11. Attachment-Detachment Trajectory for E. coli Bacteria in the Presence of Surface Forces, K. Bausemer, S. Müftü and K.-T. Wan, Northeast Bioengineering Conference, Boston, MA, April 25-27, 2014
  12. Effects of Numerical Parameters Used in Bone Fracture Healing Simulations, S. Irandoust, S. Müftü, Northeast Bioengineering Conference, Boston, MA, April 25-27, 2014
  13. A stretcheable and Transparent SWNT Strain Sensor Encapsulated in Thin PDMS Films, Y. Liu, Q. Sheng, S. Müftü, A. Khademhosseini, M. L. Wang, and M. R. Dokmeci, Proceedings of the IEEE Transducers 2013, Barcelona, SPAIN, 16-20 June 2013, pp. 1091-1094.
  14. Experimental and Numerical Investigations on Interfacial Delamination of Thin Film PTFE Coatings, Q. Sheng, A.J. White, S. Müftü, Proceeding of the 36th Annual Meeting of the Adhesion Society, Daytona Beach, FL, March 3-5, 2013.
  15. Adhesion -Detachment Mechanics of Thin Shells, J. Shi, S. Müftü and Kai-Tak Wan, Proceeding of the 36th Annual Meeting of the Adhesion Society, Daytona Beach, FL, March 3-5, 2013.
  16. Modeling the traction of a thin tape guided by a grooved roller, T. Kasikci, S. Müftü, Proceedings of the 23rd Annual Conference on Information Storage and Processing Systems ISPS2013 June 24-25, 2013, Santa Clara, California, USA.
  17. Friction induced lateral vibrations of a tape moving in contact with a slewing head, H. Yang and S. Müftü, Proceedings of the 23rd Annual Conference on Information Storage and Processing Systems ISPS2013 June 24-25, 2013, Santa Clara, California, USA.
  18. A general model of lateral web dynamics between two reels, H. Yang and S. Müftü, International Web Handling Conference (IWEB-2013), Oklahoma State University, Still Water, OK, June 5-7, 2013.
  19. On simulation of multi-particle impact interactions in the cold-spray process, B. Yildirim, A. Hulton, S.A. Alevian, T. Ando, A. Gouldstone, S. Müftü, Proceedings of the ASME/STLE 2012 International Joint Tribology Conference, IJTC2012-61202, October 8-10, 2012, Denver, Colorado
  20. Lateral Tape Dynamics over Non-linear Guides, H. Yang and S. Müftü, 2012 ASME-ISPS /JSME-IIP Joint International Conference on Micromechatronics for Information and Precision Equipment, MIPE2012, June 18-20, 2012, Santa Clara, California.
  21. On cohesion of micron scale particles in high velocity impact with a metal substrate, B. Yildirim, S. Müftü, A. Gouldstone, Proceedings of the ASME/STLE 2011 International Joint Tribology Conference, Los Angeles, CA, IJTC2011-61084, October 23-26, 2011.
  22. On polishing and erosion of aluminum substrates by a jet of alumina slurry, S. Patel, S. Müftü, Proceedings of the ASME/STLE 2011 International Joint Tribology Conference, Los Angeles, CA, IJTC2011-61082, October 23-26, 2011.
  23. Observations on the Numerical Modeling of High Velocity Impact of Micron Scale Particles B. Yildirim, S. Müftü, A. Gouldstone, US National Congress of Theoretical and Applied Mechanics, State College, PA, USNCTAM2010-1047, June 27-July2, 2010.
  24. The Fluid Structure Interactions Between a Tensioned Web and an Externally Pressurized Hollow Drum, E. Lopez, S. Müftü, US National Congress of Theoretical and Applied Mechanics, State College, PA, USNCTAM2010-921, June 27-July2, 2010.
  25. Bone Remodeling Around Dental Implant Systems, H.Y. Chou, S. Müftü, US National Congress of Theoretical and Applied Mechanics, State College, PA, USNCTAM2010-886, June 27-July2, 2010.
  26. Adhesion Mechanics of a Compliant Cylinder, J. Shi, S. Müftü, K. Wan, US National Congress of Theoretical and Applied Mechanics, State College, PA, USNCTAM2010-832, June 27-July2, 2010.
  27. Effect of Impact Velocity and Angle on the Deformation Behavior of Micron Scale Particles,B. Yildirim, S. Müftü, A. Gouldstone, 14th International Conference on Machine Design and Production, June 29 – July 2, 2010, Guzelyurt, Northern Cyprus.
  28. Optimization of Material Removal Efficiency in Low Pressure CMP, D. Bozkaya, S. Müftü, Proceedings MRS Spring Meeting, San Fransisco, CA, April, 2009.
  29. Load transfer along the bone dental implant interface, S. Faegh, S. Müftü, Proceedings of the ASME 2009 Summer Bioengineering Conference (SBC2009) June 17-21, Lake Tahoe, CA, 2009.
  30. On the vibration helically wrapped webs, E. Lopez, J. Masters, S. Müftü, Symposium on Mechanics of Slender Structures, Baltimore, MD, July 23-25, 2008.
  31. On the Effects of Surface Forces on the Contact of a Wafer and Abrasive Particles in CMP, D. Bozkaya, S. Müftü, Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC2008-71122, Miami, Florida, USA, October 20-22, 2008.
  32. A Model For Optimizating Material Removal Rate In Low-Pressure Cmp: Effects Of Pad Porosity And Abrasive Concentration, D. Bozkaya, S. Müftü, Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC2008-71129, Miami, Florida, USA, October 20-22, 2008.
  33. Frictional Characteristics Of Polytetrafluoroethylene (Ptfe) Thin Films Deposited By Hot Filament – Chemical Vapor Deposition (Hfcvd), A.M. Karnath, A.J. White, S. Müftü, Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC2008-71131, Miami, Florida, USA, Oct. 20-22, 2008.
  34. Effects of the pad porosity on material removal rate for low-pressure CMP , D. Bozkaya, S. Müftü, Proceedings 2008 CMP-MIC, Fremont, CA March 4-6, 2008.
  35. Free vibration analysis of thin, tensioned, helically wrapped webs using Mindlin-Reissner finite element method, E. Lopez, J. Masters, S. Müftü, Proceedings of the Ninth International Conference on Web Handling, Oklahoma State University, Stillwater, OK, USA, June 11-13, 2007.
  36. The vibration of two axially translating media interconnected by an elastic foundation, M. Gaith and S. Müftü, Proceedings of the Ninth International Conference on Web Handling, Oklahoma State University, Stillwater, OK, USA, June 11-13, 2007.
  37. Manufacturing and performance evaluation of carbon nanotube-parylene sandwich thin films, C.-L. Chen, E. Lopez, M. R. Dokmeci, Y.-J. Jung, and S. Müftü, Proceedings of the Ninth International Conference on Web Handling, Oklahoma State University, Stillwater, OK, USA, June 11-13, 2007.
  38. Contact Model for a Pad Asperity and a Wafer Surface in the Presence of Abrasive Particles for Chemical Mechanical Polishing , D. Bozkaya, S. Müftü, Proceedings MRS Spring Meeting, San Fransisco, CA April 9-13, 2007.
  39. Highly Organized Carbon Nanotube-PDMS Hybrid System for Multifunctional Flexible Devices, Y.-J. Jung, L. Jaber-Ansari, X. Xiong, S. Müftü, A. Busnaina, S. Kar, C. Soldano, and P.-M. Ajayan, Proceedings of 2007 ASME International Design Engineering Technical Conference & Computer and Information Engineering Conference, September 4-7, 2007, Las-Vegas, NV.
  40. Fabrication and evaluation of Carbon Nanotube-Parylene functional composite films, C.-L. Chen, E. Lopez, P. Makaram, A. Busnaina, Y.-J. Jung, S. Müftü, and M. R. Dokmeci, Proceedings of the 14th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers '07), Lyon, France, June 10-14 2007.
  41. The vibration of two axially translating strings interconnected by winkler elastic foundation, M. Gaith and S. Müftü, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition November 5-10, 2006 Chicago, Illinois IMECE2006-14067.
  42. Analytical and experimental natural frequencies of transverse vibration of sandwich beams interconnected by Winkler elastic foundation,, M. Gaith and S. Müftü, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition November 5-10, 2006 Chicago, Illinois, IMECE2006-14069.
  43. Free vibration analysis of two axially translating strings interconnected by a continuous elastic foundation, M. Gaith and S. Müftü, ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2006) Santa Clara, CA, June 21-23, 2006.
  44. Investigation of Fluid Mechanics of Slotted Air-Jets for Air Reverser Applications, E. Lopez and S. Müftü, Proceeding of the Eight International Conference on Web Handling, Oklahoma State University, Stillwater, OK, USA, June 5-8, 2005.
  45. The Mechanics of a Thin Web Wrapped Helically Around a Turn Bar, S. Müftü, Proceeding of the Eight International Conference on Web Handling, Oklahoma State University, Stillwater, OK, USA, June 5-8, 2005.
  46. Transverse Vibration of Two Axially Moving Beams Connected By An Elastic Foundation M. Gaith and S. Müftü, Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition November 11-15, 2005 Orlando, Florida.(pdf)
  47. Mechanics of Thin, Flexible, Translating Media and Their Interactions with Surrounding Air, S. Müftü, (Invited) ,Proceedings of the JSME, Information, Intelligence & Precision Equipment (IIP) 2005 Conference, Tokyo, Japan, March 21-22, 2005.(pdf)
  48. The sliding and rolling of a sphere at the nano scale Ö.T. Sari, G. G. Adams and S. Müftü, Proceedings of 2004 STLE/ASME Joint International Tribology Conference Long Beach, California USA, October 24-27, 2004, CD-ROM Proceedings TRIB200-64347.(pdf)
  49. Height Dependent Radii of Curvatures in a Contact and Friction Model, G. G. Adams and S. Müftü, Proceedings of 2004 STLE/ASME Joint International Tribology Conference Long Beach, California USA, October 24-27, 2004, CD-ROM Proceedings TRIB200-64349.(pdf)
  50. Friction Induced Transverse Vibrations of an Accelerating String, G. Zen and S. Müftü, Proceedings of 2003 STLE/ASME Joint International Tribology Conference Ponte Vedra Beach, Florida USA, October 26-29, 2003. (pdf)
  51. A Cylindrical Contact Model for Two Dimensional Multiasperity Profiles, J.J. Jagodnik and S. Müftü, Proceedings of 2003 STLE/ASME Joint International Tribology Conference Ponte Vedra Beach, Florida USA, October 26-29, 2003.(pdf)
  52. Asymmetric Asperity Height Distributions in a Scale-Dependent Model for Contact and Friction, G. G. Adams and S. Müftü, Proceedings of 2003 STLE/ASME Joint International Tribology Conference Ponte Vedra Beach, Florida USA, October 26-29, 2003.(pdf)
  53. Sliding and Rolling In Particle Adhesion On A Substrate, G. G. Adams, Ö.T. Sari, and S. Müftü, Proceedings of the Annual Meeting of the Adhesion Society, February 23-26, 2003, Myrtle Beach, SC.
  54. The Mechanics of a helically wrapped thin-shell supported by an externally pressurized air cushion, Sinan Müftü, Proceedings of 5th International Symposium on FSI, AE & FIV+N: ASME IMECENNovember 17-22, 2002, New Orleans
  55. A nano-scale multi-asperity contact and friction model, George G. Adams, Sinan Müftü and Nazif Mohd Azhar, Proceedings of 2002 ASME/STLE Joint International Tribology Conference Cancun, Mexico, October 27-30, 2002
  56. A nano-scale multi-asperity contact and friction model, George G. Adams, Sinan Müftü and Nazif Mohd Azhar, Proceedings of IMECE'02 2002 ASME International Mechanical Engineering Congress & Exposition New Orleans, Louisiana, November 17-22, 2002
  57. Simulation of Moving Thin Materials, S. Müftü, Proceedings of the Symposium in Celebration of 100 Years of Mechanical Engineering at Brooklyn Polytechnic: Technology for the Next Century, November 4-5, 1999.
  58. An Experimental and Theoretical Investigation of Web Traction Over a Non-Vented Roller, B.S. Rice, K.A. Cole and S. Müftü, Proceedings of the International Web Handling Conference 1999, Oklahoma State University, Stillwater, OK, June 1999.
  59. Mechanics of a Flexible Web Floating over an Air Reverser, S. Müftü and K.A. Cole Proceedings of the International Web Handling Conference 1999, Oklahoma State University, Stillwater, OK, June 1999.
  60. Numerical Solution of the Equations Governing the Steady State of a Thin Cylindrical Web Supported by an Air Cushion, S. Müftü, Proceedings of the Symposium on Flow-Induced Vibration and Noise of Thin Materials, The Winter Annual Meeting of the ASME, Nashville, TN, November 1999.
  61. A Numerical Solution of the Euler’s Equations with Nonlinear Source Terms in Modeling the Fluid Dynamics of an Air Reverser, S. Müftü, T.S. Lewis, and K.A. Cole, Proceedings of the I.S.P.S., ASME International Congress and Exposition, Dallas, TX, pp. 39-48, November 1997.
  62. Flat Heads for High Speed Contact Tape Recording: Experiments and Modelling of Wear and Performance, S. Müftü, H.F. Hinteregger, " Proceedings of the I.S.P.S., ASME International Congress and Exposition, Atlanta, GA, pp. 39-52, November 1996.
  63. Transient Study of the Two Dimensional Foil Bearing Problem, S. Müftü, R.C. Benson, Proceedings of the International Tribology Conference, Yokohama 1995, pp. 959-964, JAST, 1996.
  64. Modelling the Transport of Paper Webs Including the Paper Permeability Effects, S. Müftü, R.C. Benson, Proceedings of the I.S.P.S., ASME International Congress and Exposition, San Francisco, CA, pp. 247-258, November 1995.
Abstracts of Conference Presentations:
  1. Adhesion of Compliant Cylinders, J. Shi, S. Müftü, K.-T. Wan, “ Adhesion Society Meeting, Daytona Beach, FL, February 21-24, 2010.
  2. Bone Remodeling Due to Dental Implant Systems by Finite Element Analysis, H.Y. Chou, S. Müftü, abstract for the American Association of Dental Research Meeting, Washington, DC, March 3-6, 2010.
  3. Adhesion Mechanics of a Cylinder and a Rigid Substrate, J. Shi, S. Müftü, K.-T. Wan, abstract for the MRS Fall Meeting, Boston, MA, November, 2009.
  4. Observations on Bone-Implant Contact Based on Analysis of Internal Bone Remodeling, H.Y. Chou, S. Müftü, abstract for the Academy of Osseointegration 23st Annual Meeting, San Diego, CA, February 26-29, 2009.
  5. Fundamental Mechanisms of Load Transfer along the Bone Implant Interface, S. Faegh, S. Müftü, abstract for the Academy of Osseointegration 23st Annual Meeting, San Diego, CA, February 26-29, 2009.
  6. Chemical mechanical polishing for obtaining very smooth surfaces: An overview of technology and the case of Niobium, S. Müftü and K. Ziemer, RF Superconducting Materials Workshop, Fermi National Accelerator Laboratory, Batavia, IL, May 23-24, 2007.
  7. Free Vibration analysis of thin, tensioned, helically wrapped webs using Mindlin-Reissner finite element method, Conference digest ASME Information Storage and Processing Systems Conference, Santa Clara, CA, 2007.
  8. Contact Model for a Pad Asperity and a Wafer Surface in the Presence of Abrasive Particles for Chemical Mechanical Polishing, D. Bozkaya, S. Müftü, MRS Spring Meeting, San Fransisco, CA April 9-13, 2007. .(pdf)
  9. Biomechanical evaluation of A wide–diameter short dental implant for use in compromised bone quality regions, S. Müftü, H.Y. Chou, D. Bozkaya, abstract for the Academy of Osseointegration 21st Annual Meeting, March 8-10, 2007, San Antonio, TX.
  10. Effect of mechanotransduction in bone remodeling around dental implantsS. Müftü, H.Y. Chou,, J. Jagodnik, abstract for the Academy of Osseointegration 21st Annual Meeting, March 8-10, 2007, San Antonio, TX.
  11. Biomechanical evaluation of A wide–diameter short dental implant for use in compromised bone quality regions by finite element method, H.Y. Chou, S. Müftü, D. Bozkaya, Proceedings of NanoBio2006, Frontiers in Biomedical Devices Conference June 8-9, 2006, Irvine, California, USA, NanoBio2006, 18022.
  12. An AFM-based scanning method for mechanical testing of nanoscale cantilevers, P.J. Ryan, G.G. Adams, N.E. McGruer, S. Müftü, Materials Research Society Fall 2005 Meeting, CD-ROM-NN9.7, 2005.
  13. Bending of bridge structures due to residual stresses at an interface, P.J. Ryan, G.G. Adams, N.E. McGruer, S. Müftü, Materials Research Society Fall 2005 Meeting, CD-ROM-Y3.5, 2005.
  14. Head-Disk Interface Analysis Using Quadrilateral Adaptive Finite Elements, Holani, P. and Müftü, S., Conference digest ASME Information Storage and Processing Systems Conference, Santa Clara, CA, 2005.(pdf)
  15. Stability of an Axially Accelerating String Subjected to Frictional Guiding-Forces, Zen, G. and Müftü, S., Conference digest ASME Information Storage and Processing Systems Conference, Santa Clara, CA, 2005.
  16. A model for Analyzing Multiasperity Contact of Thin Sheets with Real Surfaces on Both Sides, Jagodnik, J. and Müftü, S., Conference digest ASME Information Storage and Processing Systems Conference, Santa Clara, CA, 2005.
  17. Stability of an Axially Accelerating String Subjected to Frictional Guding-Forces, Zen, G. and Müftü, S., Proceedings of WTC2005, World Tribology Congress III, September 12-16, 2005, Washington, D.C., USA, CD-ROM WTC2005-63863.(pdf)
  18. A Model for Analyzing Multiaspeirty Contact of Thin Shetts with Real Surfaces on Both Sides, Jagodnik, J.J. and Müftü, S., Proceedings of WTC2005, World Tribology Congress III, September 12-16, 2005, Washington, D.C., USA, CD-ROM WTC2005-63862.(pdf)
  19. Adhesion in the Contact of a Spherical Indenter with a Layered Medium, A.O. Sergici, G.G. Adams, and Müftü, S., Proceedings of WTC2005, World Tribology Congress III, September 12-16, 2005, Washington, D.C., USA, CD-ROM WTC2005-63382.(pdf)
  20. Design Considerations For Taper Integrated Screwed-In Implant-Abutment Connections, Bozkaya, D. and Müftü, S., abstract for the Academy of Osseointegration 19th Annual Meeting, March 18-20, 2004, San Fransisco, CA. (pdf)
  21. Biomechanical Evaluation Of A Wide Diameter Bicon Dental Implant In Various Bone Conditions, Bozkaya, D. and Müftü, S., abstract for the Academy of Osseointegration 19th Annual Meeting, March 18-20, 2004, San Fransisco, CA. (pdf)
  22. Traction between a web and a smooth roller, S. Müftü, Joint JSME-ASME Conference on Micromechatronics for Information and Precision Equipment, June 15-18, 2003, Yokohama, Japan. (pdf)
  23. Tape mechanics over a flat recording head, S. Müftü, Joint JSME-ASME Conference on Micromechatronics for Information and Precision Equipment, June 15-18, 2003, Yokohama, Japan. (pdf)
  24. A Multi-Asperity Friction Model Which Spans Length Scales From Nano-Contacts to Micro- and Macro-Contacts , Mohd-Azar, N., Adams, G. G., Müftü, S., Conference digest ASME Information Storage and Processing Systems Conference, Santa Clara, CA, 2002.
  25. The Effect of Bone Modulus on the Stress Distribution in a Dental Implant: A 3D Finite Element Analysis, Bozkaya, D. and Müftü, S. (2002) Conference digest, BED-Vol. 53, 2002 Advances in Bioengineering, ASME 2002.
  26. Tapered Connection Mechanisms in Dental Implants, Bozkaya, D., Müftü, S., abstract submitted to the Academy of Osseointegration 18th Annual Meeting, February 27-March 1, 2003, Boston MA.
  27. Stress Distribution Characteristics of Various Implant Systems due to Non-central Occlusal Loads, Bozkaya, D., Müftü, S. Müftü, A., abstract submitted to the Academy of Osseointegration 18th Annual Meeting, February 27-March 1, 2003, Boston MA.